This article needs additional citations for verification. (August 2018) |
The Bristol 412 is a car which was produced by British manufacturer Bristol Cars from 1975 to 1986. Variants were produced as the Bristol Beaufighter, from 1980 to 1993, and as the Bristol Beaufort, from 1984 to 1994.[2]
| Bristol 412 Bristol Beaufighter Bristol Beaufort | |
|---|---|
 1980 Bristol 412 Series 2 | |
| Overview | |
| Manufacturer | Bristol Cars |
| Production | 1975–1994 no production figures published |
| Designer | Giuseppe Mittono at Zagato (convertible)[1] |
| Body and chassis | |
| Class | Convertible |
| Layout | FR layout |
| Related | Bristol 603 |
| Powertrain | |
| Engine | |
| Dimensions | |
| Wheelbase | 2,900 mm (114.2 in) |
| Length | 4,910 mm (193.3 in) |
| Width | 1,770 mm (69.7 in) |
| Height | 1,440 mm (56.7 in) |
| Kerb weight | 1,740 kg (3,836 lb) |
| Chronology | |
| Predecessor | Bristol 411 |
Bristol 412
edit
Along with the Bristol 603, it was one of two concurrent successors to the long-serving 411 that had carried Bristol Cars through from the late 1960s to the late 1970s. The 412 was the last in the continuously numbered series of Bristols beginning with Bristol 400.
Whereas the 603 was a dramatically restyled version of the characteristic Bristol two-door saloon, the 412 was different in that it was a Targa-type convertible with a removable roof that could be placed in the large luggage compartment. The earliest versions of the 412 were also very unusual for a post-World War II car in that the body was made by Zagato in Italy and attached to a chassis built by Bristol Cars in Filton, England. This chassis was almost exactly the same as that of the Bristol 603, but the earliest 412s retained the Chrysler B series petrol engines 6,556 cc (400 cubic inches) producing 264bhp and 335lb•ft torque, that had been introduced in the 411 series 4 the previous year. However, the second series of 412, which arrived towards the end of 1977,[3] changed to the same 5,899 cc (360 cubic inch) high performance, 225 hp[4] and 280 lb⋅ft torque[5] version of the Chrysler LA petrol engine, designated E58, as that used in the Bristol 603 and later in its successor, the Bristol Britannia.
The 1977 second series cars incorporated front suspension modifications to allow for the lighter engine along with a final drive ratio changed to the longer 2.88:1 ratio, to improve economy.[3] Other changes included improved ventilation, redesigned seats, as fitted to the 603, and service intervals extended to 10,000 miles (16,000 km).[3]
In an effort to move into the United States market, Bristol designed a 412USA that complied with the extremely strict emissions and safety regulations of the US, with a catalytic converter and a much stronger roll bar than on the first 412. However, the company's specialist status made exporting very difficult and most of these modified 412 models were exported to Europe and markets such as West Germany and Switzerland.
The Bristol Owners Club (BOC) website lists 29 412 series one cars, 34 412 series two cars and 2 412USA cars.
Bristol Beaufighter
editThe Beaufighter, named after the Bristol Beaufighter, a Second World War heavy fighter aircraft produced by Bristol Aeroplane Company (the parent of Bristol cars until 1960), was still designed by Zagato but now fully factory-bodied at Filton, had very similar styling to the original 412 except for the four-headlamp layout.
However, the 5,899 cc V8 engine was upgraded by the addition of a Rotomaster turbocharger which increased power and torque by approximately 30%, giving the Beaufighter a maximum speed of 241 km/h (150 mph). To cope with the extra torque, the Torqueflite automatic gearbox that had been a constant in every Bristol since the 407 was upgraded with a stronger, thicker propeller shaft and a torque converter taken from the 7.2 litre (440 cubic inch) RB engine found in Chrysler's top-of-the-line models during the 1970s.
The Beaufighter was first built in 1982 and continued until 1993. “Fewer than 20” were made, according to the Bristol Cars website.[6]
The BOC website lists 28 Beaufighter cars.
Bristol Beaufort
editFor export only, primarily to continental Europe, the Beaufort, named after Bristol Aeroplane's Second World war torpedo bomber, the Bristol Beaufort was the last development of the 412 to appear. It used the same turbocharged 5,899 cc V8 found in the Beaufighter. Unlike other versions of the 412, the Beaufort was a true convertible, with a powered roof.
The Beaufort had a reinforced windscreen frame to compensate for the absence of a fixed roll bar. To allow for the greater range between fill-ups with petrol necessary for touring beyond the short distances found in the British Isles, the Beaufort possessed a greatly enlarged fuel tank of 136 L (30 imp gal; 36 US gal) as opposed to the mere 82 L (18 imp gal; 22 US gal) tank of other Bristols of the time. This allowed a range from one fill-up to the next of around 800 kilometres (500 mi) whereas the Britannia, Brigand, and Beaufighter could typically only go for 480 kilometres (300 mi) without refuelling. It was produced in very small numbers until 1994.
References
edit- ^ "1980 Bristol 412 Targa Convertible Registration no. KLD 94V Chassis no. 7863198Z". cars.bonhams.com. Retrieved 18 October 2024.
- ^ Bristol Type 412 - Convertible / Saloon, www.boc.net Archived 16 April 2014 at the Wayback Machine Retrieved 3 January 2017
- ^ a b c "MotorWeek: Bristol's 78 changes". Motor. vol. Vol. 152: nbr 3919. 26 November 1977. p. 2.
- ^ Hollingdale, Keith; Karl Pippart III. "Looking Back at the 1978 Dodge Li'l Red Express Truck". Motortrend. Retrieved 6 May 2024.
- ^ Hollingdale, Keith; David Zatz (16 November 2020). "Mopar LA Series V8 Engines: 318, 340, 360, and 273". Allpar.com. Retrieved 6 May 2024.
- ^ "1989 Bristol Beaufighter: Sold". Bristol Cars. Archived from the original on 22 February 2015. Retrieved 13 March 2015.
External links
edit