In mathematics, the Brunn–Minkowski theorem (or Brunn–Minkowski inequality) is an inequality relating the volumes (or more generally Lebesgue measures) of compact subsets of Euclidean space. The original version of the Brunn–Minkowski theorem (Hermann Brunn 1887; Hermann Minkowski 1896) applied to convex sets; the generalization to compact nonconvex sets stated here is due to Lazar Lyusternik (1935).
Statement
editLet n ≥ 1 and let μ denote the Lebesgue measure on Rn. Let A and B be two nonempty compact subsets of Rn. Then the following inequality holds:
where A + B denotes the Minkowski sum:
The theorem is also true in the setting where are only assumed to be measurable and non-empty.[1]
Multiplicative version
editThe multiplicative form of Brunn–Minkowski inequality states that for all .
The Brunn–Minkowski inequality is equivalent to the multiplicative version.
In one direction, use the inequality (exponential is convex), which holds for . In particular, .
Conversely, using the multiplicative form, we find
The right side is maximized at , which gives
.
The Prékopa–Leindler inequality is a functional generalization of this version of Brunn–Minkowski.
On the hypothesis
editMeasurability
editIt is possible for to be Lebesgue measurable and to not be; a counter example can be found in "Measure zero sets with non-measurable sum." On the other hand, if are Borel measurable, then is the continuous image of the Borel set , so analytic and thus measurable. See the discussion in Gardner's survey for more on this, as well as ways to avoid measurability hypothesis.
In the case that A and B are compact, so is A + B, being the image of the compact set under the continuous addition map : , so the measurability conditions are easy to verify.
Non-emptiness
editThe condition that are both non-empty is clearly necessary. This condition is not part of the multiplicative versions of BM stated below.
Proofs
editWe give two well known proofs of Brunn–Minkowski.
Geometric proof via cuboids and measure theory
|
---|
We give a well-known argument that follows a general recipe of arguments in measure theory; namely, it establishes a simple case by direct analysis, uses induction to establish a finitary extension of that special case, and then uses general machinery to obtain the general case as a limit. A discussion of this history of this proof can be found in Theorem 4.1 in Gardner's survey on Brunn–Minkowski. We prove the version of the Brunn–Minkowski theorem that only requires to be measurable and non-empty.
By translation invariance of volumes, it suffices to take . Then . In this special case, the Brunn–Minkowski inequality asserts that . After dividing both sides by , this follows from the AM–GM inequality: .
We will use induction on the total number of boxes, where the previous calculation establishes the base case of two boxes. First, we observe that there is an axis aligned hyperplane H that such that each side of H contains an entire box of A. To see this, it suffices to reduce to the case where A consists of two boxes, and then calculate that the negation of this statement implies that the two boxes have a point in common. For a body X, we let denote the intersections of X with the "right" and "left" halfspaces defined by H. Noting again that the statement of Brunn–Minkowski is translation invariant, we then translate B so that ; such a translation exists by the intermediate value theorem because is a continuous function, if v is perpendicular to H has limiting values 0 and as , so takes on at some point. We now have the pieces in place to complete the induction step. First, observe that and are disjoint subsets of , and so Now, both have one fewer box than A, while each have at most as many boxes as B. Thus, we can apply the induction hypothesis: and . Elementary algebra shows that if , then also , so we can calculate:
In this setting, both bodies can be approximated arbitrarily well by unions of disjoint axis aligned rectangles contained in their interior; this follows from general facts about the Lebesgue measure of open sets. That is, we have a sequence of bodies , which are disjoint unions of finitely many axis aligned rectangles, where , and likewise . Then we have that , so . The right hand side converges to as , establishing this special case.
For a compact body X, define to be the -thickening of X. Here each is the open ball of radius , so that is a bounded, open set. , so that if X is compact, then . By using associativity and commutativity of Minkowski sum, along with the previous case, we can calculate that . Sending to 0 establishes the result.
Recall that by the regularity theorem for Lebesgue measure for any bounded measurable set X, and for any , there is a compact set with . Thus, for all k, using the case of Brunn–Minkowski shown for compact sets. Sending establishes the result.
We let , and again argue using the previous case that , hence the result follows by sending k to infinity. |
Proof as a corollary of the Prékopa–Leindler inequality
|
---|
We give a proof of the Brunn–Minkowski inequality as a corollary to the Prékopa–Leindler inequality, a functional version of the BM inequality. We will first prove PL, and then show that PL implies a multiplicative version of BM, then show that multiplicative BM implies additive BM. The argument here is simpler than the proof via cuboids, in particular, we only need to prove the BM inequality in one dimensions. This happens because the more general statement of the PL-inequality than the BM-inequality allows for an induction argument.
First, the Brunn–Minkowski inequality implies a multiplicative version, using the inequality , which holds for . In particular, . The Prékopa–Leindler inequality is a functional generalization of this version of Brunn–Minkowski.
Theorem (Prékopa–Leindler inequality): Fix . Let be non-negative, measurable functions satisfying for all . Then . Proof (Mostly following this lecture): We will need the one dimensional version of BM, namely that if are measurable, then . First, assuming that are bounded, we shift so that . Thus, , whence by almost disjointedness we have that . We then pass to the unbounded case by filtering with the intervals We first show the case of the PL inequality. Let . . Thus, by the one-dimensional version of Brunn–Minkowski, we have that . We recall that if is non-negative, then Fubini's theorem implies . Then, we have that , where in the last step we use the weighted AM–GM inequality, which asserts that for . Now we prove the case. For , we pick and set . For any c, we define , that is, defining a new function on n-1 variables by setting the last variable to be . Applying the hypothesis and doing nothing but formal manipulation of the definitions, we have that . Thus, by the inductive case applied to the functions , we obtain . We define and similarly. In this notation, the previous calculation can be rewritten as: . Since we have proven this for any fixed , this means that the function satisfy the hypothesis for the one dimensional version of the PL theorem. Thus, we have that , implying the claim by Fubini's theorem. QED
The multiplicative version of Brunn–Minkowski follows from the PL inequality, by taking .
We now explain how to derive the BM-inequality from the PL-inequality. First, by using the indicator functions for Prékopa–Leindler inequality quickly gives the multiplicative version of Brunn–Minkowski: . We now show how the multiplicative BM-inequality implies the usual, additive version. We assume that both A,B have positive volume, as otherwise the inequality is trivial, and normalize them to have volume 1 by setting . We define ; . With these definitions, and using that , we calculate using the multiplicative Brunn–Minkowski inequality that: The additive form of Brunn–Minkowski now follows by pulling the scaling out of the leftmost volume calculation and rearranging. |
Important corollaries
editThe Brunn–Minkowski inequality gives much insight into the geometry of high dimensional convex bodies. In this section we sketch a few of those insights.
Concavity of the radius function (Brunn's theorem)
editConsider a convex body . Let be vertical slices of K. Define to be the radius function; if the slices of K are discs, then r(x) gives the radius of the disc K(x), up to a constant. For more general bodies this radius function does not appear to have a completely clear geometric interpretation beyond being the radius of the disc obtained by packing the volume of the slice as close to the origin as possible; in the case when K(x) is not a disc, the example of a hypercube shows that the average distance to the center of mass can be much larger than r(x). Sometimes in the context of a convex geometry, the radius function has a different meaning, here we follow the terminology of this lecture.
By convexity of K, we have that . Applying the Brunn–Minkowski inequality gives , provided . This shows that the radius function is concave on its support, matching the intuition that a convex body does not dip into itself along any direction. This result is sometimes known as Brunn's theorem.
Brunn–Minkowski symmetrization of a convex body
editAgain consider a convex body . Fix some line and for each let denote the affine hyperplane orthogonal to that passes through . Define, ; as discussed in the previous section, this function is concave. Now, let . That is, is obtained from by replacing each slice with a disc of the same -dimensional volume centered inside of . The concavity of the radius function defined in the previous section implies that that is convex. This construction is called the Brunn–Minkowski symmetrization.
Grunbaum's theorem
editTheorem (Grunbaum's theorem):[2] Consider a convex body . Let be any half-space containing the center of mass of ; that is, the expected location of a uniform point sampled from Then .
Grunbaum's theorem can be proven using Brunn–Minkowski inequality, specifically the convexity of the Brunn–Minkowski symmetrization.[3]
Grunbaum's inequality has the following fair cake cutting interpretation. Suppose two players are playing a game of cutting up an dimensional, convex cake. Player 1 chooses a point in the cake, and player two chooses a hyperplane to cut the cake along. Player 1 then receives the cut of the cake containing his point. Grunbaum's theorem implies that if player 1 chooses the center of mass, then the worst that an adversarial player 2 can do is give him a piece of cake with volume at least a fraction of the total. In dimensions 2 and 3, the most common dimensions for cakes, the bounds given by the theorem are approximately respectively. Note, however, that in dimensions, calculating the centroid is hard,[4] limiting the usefulness of this cake cutting strategy for higher dimensional, but computationally bounded creatures.
Applications of Grunbaum's theorem also appear in convex optimization, specifically in analyzing the converge of the center of gravity method.[5]
Isoperimetric inequality
editLet denote the unit ball. For a convex body, K, let define its surface area. This agrees with the usual meaning of surface area by the Minkowski-Steiner formula. Consider the function . The isoperimetric inequality states that this is maximized on Euclidean balls.
Proof of isoperimetric inequality via Brunn–Minkowski
|
---|
First, observe that Brunn–Minkowski implies where in the last inequality we used that for . We use this calculation to lower bound the surface area of via Next, we use the fact that , which follows from the Minkowski-Steiner formula, to calculate Rearranging this yields the isoperimetric inequality: |
Applications to inequalities between mixed volumes
editThe Brunn–Minkowski inequality can be used to deduce the following inequality , where the term is a mixed-volume. Equality holds if and only if K,L are homothetic. (See theorem 3.4.3 in Hug and Weil's course on convex geometry.)
Proof
|
---|
We recall the following facts about mixed volumes : , so that in particular if , then . Let . Brunn's theorem implies that this is concave for . Thus, , where denotes the right derivative. We also have that . From this we get , where we applied BM in the last inequality. |
Concentration of measure on the sphere and other strictly convex surfaces
editWe prove the following theorem on concentration of measure, following notes by Barvinok and notes by Lap Chi Lau. See also Concentration of measure#Concentration on the sphere.
Theorem: Let be the unit sphere in . Let . Define , where d refers to the Euclidean distance in . Let denote the surface area on the sphere. Then, for any we have that .
Proof
|
---|
Proof: Let , and let . Then, for one can show, using and for , that . In particular, . We let , and aim to show that . Let . The argument below will be symmetric in , so we assume without loss of generality that and set . Then,
This implies that . (Using that for any convex body K and , .) Thus, we know that , so . We apply the multiplicative form of the Brunn–Minkowski inequality to lower bound the first term by , giving us . . QED |
Version of this result hold also for so-called strictly convex surfaces, where the result depends on the modulus of convexity. However, the notion of surface area requires modification, see: the aforementioned notes on concentration of measure from Barvinok.
Remarks
editThe proof of the Brunn–Minkowski theorem establishes that the function
is concave in the sense that, for every pair of nonempty compact subsets A and B of Rn and every 0 ≤ t ≤ 1,
For convex sets A and B of positive measure, the inequality in the theorem is strict for 0 < t < 1 unless A and B are positive homothetic, i.e. are equal up to translation and dilation by a positive factor.
Examples
editRounded cubes
editIt is instructive to consider the case where an square in the plane, and a ball of radius . In this case, is a rounded square, and its volume can be accounted for as the four rounded quarter circles of radius , the four rectangles of dimensions along the sides, and the original square. Thus,
This example also hints at the theory of mixed-volumes, since the terms that appear in the expansion of the volume of correspond to the differently dimensional pieces of A. In particular, if we rewrite Brunn–Minkowski as , we see that we can think of the cross terms of the binomial expansion of the latter as accounting, in some fashion, for the mixed volume representation of . This same phenomenon can also be seen for the sum of an n-dimensional box and a ball of radius , where the cross terms in , up to constants, account for the mixed volumes. This is made precise for the first mixed volume in the section above on the applications to mixed volumes.
Examples where the lower bound is loose
editThe left-hand side of the BM inequality can in general be much larger than the right side. For instance, we can take X to be the x-axis, and Y the y-axis inside the plane; then each has measure zero but the sum has infinite measure. Another example is given by the Cantor set. If denotes the middle third Cantor set, then it is an exercise in analysis to show that .
Connections to other parts of mathematics
editThe Brunn–Minkowski inequality continues to be relevant to modern geometry and algebra. For instance, there are connections to algebraic geometry,[6][7] and combinatorial versions about counting sets of points inside the integer lattice.[8]
See also
editReferences
edit- Brunn, H. (1887). Über Ovale und Eiflächen. Inaugural Dissertation, München.
- Fenchel, Werner; Bonnesen, Tommy (1934). Theorie der konvexen Körper. Ergebnisse der Mathematik und ihrer Grenzgebiete. Vol. 3. Berlin: 1. Verlag von Julius Springer.
- Fenchel, Werner; Bonnesen, Tommy (1987). Theory of convex bodies. Moscow, Idaho: L. Boron, C. Christenson and B. Smith. BCS Associates. ISBN 9780914351023.
- Dacorogna, Bernard (2004). Introduction to the Calculus of Variations. London: Imperial College Press. ISBN 1-86094-508-2.
- Heinrich Guggenheimer (1977) Applicable Geometry, page 146, Krieger, Huntington ISBN 0-88275-368-1 .
- Lyusternik, Lazar A. (1935). "Die Brunn–Minkowskische Ungleichnung für beliebige messbare Mengen". Comptes Rendus de l'Académie des Sciences de l'URSS. Nouvelle Série. III: 55–58.
- Minkowski, Hermann (1896). Geometrie der Zahlen. Leipzig: Teubner.
- Ruzsa, Imre Z. (1997). "The Brunn–Minkowski inequality and nonconvex sets". Geometriae Dedicata. 67 (3): 337–348. doi:10.1023/A:1004958110076. MR 1475877. S2CID 117749981.
- Rolf Schneider, Convex bodies: the Brunn–Minkowski theory, Cambridge University Press, Cambridge, 1993.
References
edit- ^ Gardner, Richard J. (2002). "The Brunn–Minkowski inequality". Bull. Amer. Math. Soc. (N.S.) 39 (3): pp. 355–405 (electronic). doi:10.1090/S0273-0979-02-00941-2. ISSN 0273-0979.
- ^ Grünbaum, B. (1960). "Partitions of mass-distributions and of convex bodies by hyperplanes". Pacific Journal of Mathematics. 10 (4): 1257–1261. doi:10.2140/pjm.1960.10.1257. MR 0124818.
- ^ See these lecture notes for a proof sketch.
- ^ Rademacher, Luis (2007). "Approximating the centroid is hard". In Erickson, Jeff (ed.). Proceedings of the 23rd ACM Symposium on Computational Geometry, Gyeongju, South Korea, June 6–8, 2007. pp. 302–305. doi:10.1145/1247069.1247123. ISBN 978-1-59593-705-6.
- ^ See theorem 2.1 in these notes.
- ^ GROMOV, M. (1990). "CONVEX SETS AND KÄHLER MANIFOLDS". Advances in Differential Geometry and Topology. WORLD SCIENTIFIC. pp. 1–38. doi:10.1142/9789814439381_0001. ISBN 978-981-02-0494-5.
- ^ Neeb, Karl-Hermann (2015-10-12). "Kaehler Geometry, Momentum Maps and Convex Sets". arXiv:1510.03289v1 [math.SG].
- ^ Hernández Cifre, María A.; Iglesias, David; Nicolás, Jesús Yepes (2018). "On a Discrete Brunn--Minkowski Type Inequality". SIAM Journal on Discrete Mathematics. 32 (3). Society for Industrial & Applied Mathematics (SIAM): 1840–1856. doi:10.1137/18m1166067. ISSN 0895-4801.