This page provides supplementary chemical data on carbon disulfide.
Material Safety Data Sheet
editThe handling of this chemical may incur notable safety precautions. It is highly recommended that you seek the Material Safety Datasheet (MSDS) for this chemical from a reliable source such as SIRI, and follow its direction. MSDS available from Mallinckrodt Baker
Structure and properties
editStructure and properties | |
---|---|
Index of refraction, nD | 1.6276 at 20 °C |
Abbe number | ? |
Dielectric constant, εr | 2.641 ε0 at 20 °C |
Bond strength | ? |
Bond length | ? |
Bond angle | ? |
Magnetic susceptibility | ? |
Surface tension[1] | 35.3 dyn/cm at 0 °C 32.3 dyn/cm at 20 °C |
Viscosity[2] | 0.495 mPa·s at –10 °C 0.436 mPa·s at 0 °C 0.380 mPa·s at 5 °C 0.363 mPa·s at 20 °C |
Thermodynamic properties
editPhase behavior | |
---|---|
Triple point | 161.11 K (–112.04 °C), ? Pa |
Critical point | 552 K (279 °C), 7900.00 kPa |
Std enthalpy change of fusion, ΔfusH |
4.39 kJ/mol |
Std entropy change of fusion, ΔfusS |
? J/(mol·K) |
Std enthalpy change of vaporization, ΔvapH |
27.65 kJ/mol |
Std entropy change of vaporization, ΔvapS |
86.68 J/(mol·K) |
Solid properties | |
Std enthalpy change of formation, ΔfH |
? kJ/mol |
Standard molar entropy, S |
? J/(mol K) |
Heat capacity, cp | ? J/(mol K) |
Liquid properties | |
Std enthalpy change of formation, ΔfH |
89.41 kJ/mol |
Standard molar entropy, S |
151.0 J/(mol K) |
Enthalpy of combustion, ΔcH |
–1687.2 kJ/mol |
Heat capacity, cp | 78.99 J/(mol K) at 25 °C |
Gas properties | |
Std enthalpy change of formation, ΔfH |
117.1 kJ/mol |
Standard molar entropy, S |
237.98 J/(mol K) at 101.325 kPa |
Enthalpy of combustion, ΔcH |
–1112 kJ/mol |
Heat capacity, cp | 45.66 J/(mol K) |
van der Waals' constants[3] | a = 1177 L2 kPa/mol2 b = 0.07685 liter per mole |
Vapor pressure of liquid
editP in mm Hg | 1 | 10 | 40 | 100 | 400 | 760 | 1520 | 3800 | 7600 | 15200 | 30400 | 45600 | |
T in °C | –73.8 | –44.7 | –22.5 | –5.1 | 28.0 | 46.5 | 69.1 | 104.8 | 136.3 | 175.5 | 222.8 | 256.0 |
Table data obtained from CRC Handbook of Chemistry and Physics 44th ed.
Distillation data
editVapor-liquid Equilibrium for Carbon disulfide/Methanol[5] P = 760 mm Hg | ||
BP Temp. °C |
% by mole carbon disulfide | |
---|---|---|
liquid | vapor | |
58.8 | 1.3 | 20.6 |
53.0 | 2.5 | 34.9 |
47.8 | 4.5 | 48.7 |
43.5 | 9.9 | 65.3 |
42.8 | 10.6 | 65.9 |
40.0 | 15.1 | 67.6 |
38.9 | 19.4 | 70.1 |
38.5 | 20.0 | 69.1 |
38.0 | 34.0 | 69.8 |
37.8 | 64.9 | 70.1 |
37.6 | 70.0 | 70.1 |
37.9 | 75.7 | 70.5 |
37.8 | 90.3 | 72.3 |
37.7 | 91.6 | 73.4 |
37.8 | 92.8 | 72.7 |
38.2 | 93.0 | 72.9 |
41.0 | 99.0 | 84.4 |
44.1 | 99.7 | 99.5 |
Spectral data
editUV-Vis | |
---|---|
λmax | ? nm |
Extinction coefficient, ε | ? |
IR | |
Major absorption bands | ? cm−1 |
NMR | |
Proton NMR | |
Carbon-13 NMR | |
Other NMR data | |
MS | |
Masses of main fragments |
References
edit- ^ Lange's Handbook of Chemistry, 10th ed. pp. 1661–1663
- ^ CRC Handbook of Chemistry and Physics, 44th ed. pp. 2258–2263
- ^ Lange's Handbook of Chemistry 10th ed, pp. 1522–1524
- ^ "Pure Component Properties" (Queriable database). Chemical Engineering Research Information Center. Retrieved 19 May 2007.
- ^ "Binary Vapor-Liquid Equilibrium Data" (Queriable database). Chemical Engineering Research Information Center. Retrieved 19 May 2007.
- Linstrom, Peter (1997). "NIST Standard Reference Database". National Institute of Standards and Technology. doi:10.18434/T4D303.
{{cite journal}}
: Cite journal requires|journal=
(help)
This box:
- Except where noted otherwise, data relate to Standard temperature and pressure.
- Reliability of data general note.