Chemin de fer Touristique d'Anse

The 'Chemin de fer Touristique d'Anse' (also known as Voie de 38 ), is managed by a French association. It is located in the city center of Anse, in the Rhône department in the Auvergne-Rhône-Alpes region.

CFT Anse - Voie de 38
X131 when passing through the hills
Overview
LocaleFrance
Termini
  • Anse pont
  • Anse Plage
Websitehttp://www.cftanse.fr
History
Opened1968
Technical
Track gauge15 in (381 mm)

It offers journeys of approximately forty five minutes on trains running on a 15 in (381 mm) narrow gauge track. Trains run from April to October, Saturdays, Sundays and some public holidays. The Anse SNCF station is located near the starting point.

History

edit

It was in 1968 that André Chaumeil and Guy Mathan implemented their idea of creating a model train that could carry passengers. They chose the English 14 scale, which is the common scale between real train and model making. They built a machine inspired by the SNCF Locomotor Y9201, with the engine of a Renault Dauphine, and a wagon serving as the driver's seat. This first train called “Yoyo” is presented at Francheville on a 300-metre (330 yd) long track installed in the property of a friend of the manufacturers. The following year the route was moved to Trévoux on the banks of the Saône, with a simple verbal agreement from the mayor, its length doubled. That same year 1969, the designers and their friends founded the "Association of Model Railroads on track of 15 in (381 mm) gauge. In 1971, the new mayor refused to renew the agreement and therefore the line had to be moved.[1]

Association CFT Anse

edit

The CFT Anse, is an association law 1901. Its 60 members build, maintain and drive the trains. They do not hesitate to visit the depot and present the material. The depot-workshop is located at 560 route de Saint Bernard in Anse.

Line from Anse-Pont to Anse-Plage

edit

The rails meander from the heart of the town of Anse to the Colombier lake, where there is a beach and small paths along the Saône. The departure is carried out in main station at Anse-Pont, then the train runs along the Azergues, passes under the bridge SNCF then under that of the highway. After two blasts of the horn, he crossed the access road to the `` Portes du Beaujolais campsite via a barrier-free level crossing. The rails now thread between small green hills, then the train goes down and it is the passage of the tunnel; after this, he begins the long straight line towards the lake and its beach. A turntable at each end of the line allow locomotives to be turned around. The machinery depot has also been erected in May 2016, for the operation of the locomotives.

14 scale trains

edit

The trains are approximately 14 scale reproductions of real rolling stock: three railcars, one X 4900 (blue and white), one ABV (red and cream) and a TAR, the ancestor of the TGV (metallic gray). These 3 low-bed or tricaisses railcars are motorized with Citroën 2CV engines, with the 2CV mechanical gearbox; a BB type diesel locomotive, motorized with a 2,000 cc (120 cu in)} turbo diesel engine, hydraulic gearbox; a type 131 steam locomotive with separate tender was put into service in the spring of 2016. It was officially named "La Fernande" on September 4, 2016; a Y 9200 type 2-axle shunting tractor, currently powered by a Citroën 2CV engine; three covered passenger cars and three large open wagons; and various Railway track#Maintenanceservice cars: dumpers, two long flat wagons, three ballast tanks and three sedans.

Member of UNECTO

edit

The CFT Anse [2] is a member of the Union of Tourist Railways and Museum Operators [fr][3]

See also

edit
edit

Notes and references

edit
edit