where Qi is the surface charge on conductor i. The coefficients of potential are the coefficients pij. φi should be correctly read as the potential on the i-th conductor, and hence "" is the p due to charge 1 on conductor 2.
Note that:
pij = pji, by symmetry, and
pij is not dependent on the charge.
The physical content of the symmetry is as follows:
if a charge Q on conductor j brings conductor i to a potential φ, then the same charge placed on i would bring j to the same potential φ.
In general, the coefficients is used when describing system of conductors, such as in the capacitor.
System of conductors. The electrostatic potential at point P is .
Given the electrical potential on a conductor surface Si (the equipotential surface or the point P chosen on surface i) contained in a system of conductors j = 1, 2, ..., n:
where Rji = |ri - rj|, i.e. the distance from the area-element daj to a particular point ri on conductor i. σj is not, in general, uniformly distributed across the surface. Let us introduce the factor fj that describes how the actual charge density differs from the average and itself on a position on the surface of the j-th conductor:
or
Then,
It can be shown that is independent of the distribution . Hence, with
^L. D. Landau, E. M. Lifshitz, and L. P. Pitaevskii, Electrodynamics of Continuous Media (Course of Theoretical Physics, Vol. 8), 2nd ed. (Butterworth-Heinemann, Oxford, 1984) p. 4.
^Lekner, John (2011-02-01). "Capacitance coefficients of two spheres". Journal of Electrostatics. 69 (1): 11–14. doi:10.1016/j.elstat.2010.10.002.