eSi-RISC is a configurable CPU architecture. It is available in five implementations: the eSi-1600, eSi-1650, eSi-3200, eSi-3250 and eSi-3264.[1] The eSi-1600 and eSi-1650 feature a 16-bit data-path, while the eSi-32x0s feature 32-bit data-paths, and the eSi-3264 features a mixed 32/64-bit datapath. Each of these processors is licensed as soft IP cores, suitable for integrating into both ASICs and FPGAs.[2]

eSi-RISC
DesignereSi-RISC
Bits16-bit/32-bit
Introduced2009
DesignRISC
TypeLoad–store
EncodingIntermixed 16 and 32-bit
BranchingCompare and branch and condition code
EndiannessBig or little
ExtensionsUser-defined instructions
Registers
8/16/32 General Purpose, 8/16/32 Vector

Architecture

edit

The main features of the eSi-RISC architecture are:[3]

 
eSi-3250 SoC architecture
  • RISC-like load/store architecture.
  • Configurable 16-bit, 32-bit or 32/64-bit data-path.
  • Instructions are encoded in either 16 or 32-bits.
  • 8, 16 or 32 general purpose registers, that are either 16 or 32-bits wide.
  • 0, 8, 16 or 32 vector registers, that are either 32 or 64-bits wide.
  • Up to 32 external, vectored, nested and prioritizable interrupts.
  • Configurable instruction set including support for integer, floating-point and fixed-point arithmetic.
  • SIMD operations.
  • Optional support for user-defined instructions, such as cryptographic acceleration .[4]
  • Optional caches (Configurable size and associativity).
  • Optional MMU supporting both memory protection and dynamic address translation.
  • AMBA AXI, AHB and APB bus interfaces.
  • Memory mapped I/O.
  • 5-stage pipeline.
  • Hardware JTAG debug.

While there are many different 16 or 32-bit Soft microprocessor IP cores available, eSi-RISC is the only architecture licensed as an IP core that has both 16 and 32-bit implementations.

Unlike in other RISC architectures supporting both 16 and 32-bit instructions, such as ARM/Thumb or MIPS/MIPS-16, 16 and 32-bit instructions in the eSi-RISC architecture can be freely intermixed, rather than having different modes where either all 16-bit instructions or all 32-bit instructions are executed. This improves code density without compromising performance. The 16-bit instructions support two register operands in the lower 16 registers, whereas the 32-bit instructions support three register operands and access to all 32 registers.

eSi-RISC includes support for Multiprocessing. Implementations have included up to seven eSi-3250's on a single chip.[5]

Toolchain

edit

The eSi-RISC toolchain is based on combination of a port of the GNU toolchain and the Eclipse IDE.[6] This includes:

  • GCC – C/C++ compiler.
  • Binutils – Assembler, linker and binary utilities.
  • GDB – Debugger.
  • Eclipse – Integrated Development Environment.

The C library is Newlib and the C++ library is Libstdc++. Ported RTOSes include MicroC/OS-II, FreeRTOS, ERIKA Enterprise[7] and Phoenix-RTOS[8]

References

edit
  1. ^ [1] Electronics Weekly, 17 November 2009
  2. ^ [2][permanent dead link] EE Times, 17 November 2009
  3. ^ [3] eSi-RISC eSi-3250 Technical Overview
  4. ^ [4] Electronics Weekly, 2013
  5. ^ [5] Design & Reuse, 2011
  6. ^ [6] Archived 28 February 2012 at the Wayback Machine EnSilica, 2009
  7. ^ [7] Electronics Weekly, 2010,
  8. ^ [8][permanent dead link] Cambridge Network 2013
edit