In programming, a file uniform resource identifier (URI) scheme is a specific format of URI, used to specifically identify a file on a host computer. While URIs can be used to identify anything, there is specific syntax associated with identifying files.[1][2]

Format

edit

A file URI has the format

file://host/path

where host is the fully qualified domain name of the system on which the path is accessible, and path is a hierarchical directory path of the form directory/directory/.../name. If host is omitted, it is taken to be "localhost", the machine from which the URL is being interpreted. Note that when omitting host, the slash is not omitted (while "file:///piro.txt" is valid, "file://simpen.txt" is not, although some interpreters manage to handle the latter).

RFC 3986 includes additional information about the treatment of ".." and "." segments in URIs.

Number of slash characters

edit
  • The character sequence of two slash characters (//) after the string file: denotes that either a hostname or the literal term localhost follows,[3] although this part may be omitted entirely, or may contain an empty hostname.[4]
  • The single slash between host and path denotes the start of the local-path part of the URI and must be present.[5]
  • A valid file URI must therefore begin with either file:/path (no hostname), file:///path (empty hostname), or file://hostname/path.
  • file://path (i.e. two slashes, without a hostname) is never correct, but is often used.
  • Further slashes in path separate directory names in a hierarchical system of directories and subdirectories. In this usage, the slash is a general, system-independent way of separating the parts, and in a particular host system it might be used as such in any pathname (as in Unix systems).

There are two ways that Windows UNC filenames (such as \\server\folder\data.xml) can be represented. These are both described in RFC 8089, Appendix E as "non-standard". The first way (called here the 2-slash format) is to represent the server name using the Authority part of the URI, which then becomes file://server/folder/data.xml. The second way (called here the 4-slash format) is to represent the server name as part of the Path component, so the URI becomes file:////server/folder/data.xml. Both forms are actively used. Microsoft .NET (for example, the method new Uri(path)) generally uses the 2-slash form; Java (for example, the method new URI(path)) generally uses the 4-slash form. Either form allows the most common operations on URIs (resolving relative URIs, and dereferencing to obtain a connection to the remote file) to be used successfully. However, because these URIs are non-standard, some less common operations fail: an example is the normalize operation (defined in RFC 3986 and implemented in the Java java.net.URI.normalize() method) which reduces file:////server/folder/data.xml to the unusable form file:/server/folder/data.xml.[6]

Examples

edit

Unix

edit

Here are two Unix examples pointing to the same /etc/fstab file:

file://localhost/etc/fstab
file:///etc/fstab

The KDE environment uses URIs without an authority field:

file:/etc/fstab

Windows

edit

Here are some examples which may be accepted by some applications on Windows systems, referring to the same, local file c:\WINDOWS\clock.avi

file://localhost/c:/WINDOWS/clock.avi
file:///c:/WINDOWS/clock.avi

Here is the URI as understood by the Windows Shell API:[7]

file:///c:/WINDOWS/clock.avi

Note that the drive letter followed by a colon and slash is part of the acceptable file URI.

Implementations

edit

Windows

edit

On Microsoft Windows systems, the normal colon (:) after a device letter has sometimes been replaced by a vertical bar (|) in file URLs. This reflected the original URL syntax, which made the colon a reserved character in a path part.

Since Internet Explorer 4, file URIs have been standardized on Windows, and should follow the following scheme. This applies to all applications which use URLMON or SHLWAPI for parsing, fetching or binding to URIs. To convert a path to a URL, use UrlCreateFromPath, and to convert a URL to a path, use PathCreateFromUrl.[7]

To access a file "the file.txt", the following might be used.

For a network location:

file://hostname/path/to/the%20file.txt

Or for a local file, the hostname is omitted, but the slash is not (note the third slash):

file:///c:/path/to/the%20file.txt

This is not the same as providing the string "localhost" or the dot "." in place of the hostname. The string "localhost" will attempt to access the file as UNC path \\localhost\c:\path\to\the file.txt, which will not work since the colon is not allowed in a share name. The dot "." results in the string being passed as \\.\c:\path\to\the file.txt, which will work for local files, but not shares on the local system. For example file://./sharename/path/to/the%20file.txt will not work, because it will result in sharename being interpreted as part of the DOSDEVICES namespace, not as a network share.

The following outline roughly describes the requirements.

  • The colon should be used, and should not be replaced with a vertical bar for Internet Explorer.
  • Forward slashes should be used to delimit paths.
  • Characters such as the hash (#) or question mark (?) which are part of the filename should be percent-encoded.
  • Characters which are not allowed in URIs, but which are allowed in filenames, must also be percent-encoded. For example, any of "{}`^ " and all control characters. In the example above, the space in the filename is encoded as %20.
  • Characters which are allowed in both URIs and filenames must NOT be percent-encoded.
  • Must not use legacy ACP encodings. (ACP code pages are specified by DOS CHCP or Windows Control Panel language setting.)
  • Unicode characters outside of the ASCII range must be UTF-8 encoded, and those UTF-8 encodings must be percent-encoded.

Use the provided functions if possible. If you must create a URL programmatically and cannot access SHLWAPI.dll (for example from script, or another programming environment where the equivalent functions are not available) the above outline will help.

Legacy URLs

edit

To aid the installed base of legacy applications on Win32 PathCreateFromUrl recognizes certain URLs which do not meet these criteria, and treats them uniformly. These are called "legacy" file URLs as opposed to "healthy" file URLs.[8]


In the past, a variety of other applications have used other systems. Some added an additional two slashes. For example, UNC path \\remotehost\share\dir\file.txt would become file:////remotehost/share/dir/file.txt instead of the "healthy" file://remotehost/share/dir/file.txt.

Web pages

edit

File URLs are rarely used in Web pages on the public Internet, since they imply that a file exists on the designated host. The host specifier can be used to retrieve a file from an external source, although no specific file-retrieval protocol is specified; and using it should result in a message that informs the user that no mechanism to access that machine is available.

References

edit
  1. ^ Kerwin, Matthew (February 2017). The "file" URI Scheme (Report). Internet Engineering Task Force.
  2. ^ "What is a Uniform Resource Identifier (URI)?". WhatIs.com. Retrieved 2023-09-12.
  3. ^ RFC 8089, Section 2
  4. ^ RFC 3986, Section 3.2.2
  5. ^ RFC 3986, Section 3.3
  6. ^ RFC 8089, Appendix E
  7. ^ a b Risney, Dave (2006). "File URIs in Windows". IEBlog. Microsoft Corporation. Retrieved 2020-10-02.
  8. ^ The Bizarre and Unhappy Story of 'file:' URLs - Free Associations - Site Home - MSDN Blogs. Blogs.msdn.com (2005-05-19). Retrieved on 2014-03-08.