Wikipedia

Geometric diode

Geometric diodes, also known as morphological diodes, use the shape of their structure and ballistic / quasi-ballistic electron transport to create diode behavior. Geometric diodes differ from all other forms of diodes because they do not rely on a depletion region or a potential barrier to create their diode behavior. Instead of a potential barrier, an asymmetry in the geometry of the material (that is on the order of the mean free path of the charge carrier) creates an asymmetry in forward vs reverse bias current (aka a diode).

Creating a geometric diode

edit
 
Simple geometric diodes schematic showing generic blue particles (these could be electrons or holes). From left to right the particles are funneled through the diode, but from right to left they are blocked.

Geometric diodes are formed from one continuous material (adding a caveat for 2D-electron gasses which are layered systems) that has an asymmetry in the structure on the order of the size of the charge carrier's mean free path (MFP). Typical room temperature MFPs range from single digit nanometers for metals[1] up to tens or hundreds of nms for semiconductors,[2] and even >1 micrometer in select systems.[3][4] This means that to create a geometric diode, one must either use a high MFP material, or have a fabrication process that has nanometer precision in order to create the relevant geometries.

Geometric diodes are majority carrier devices that do not need a potential barrier. The diode behavior comes from an asymmetry in the shape of the structure (as shown in the figure). Quite simply geometric diodes can be thought of as funnels or lobster traps for charges; In one direction it is relatively easy for charges to flow, and in the reverse direction it is more difficult.

Additionally, it is ideal to have specular reflection of the charge carriers at the surface of the structure; however, this is not as critical as being small enough to be in a ballistic regime.

Advantages and disadvantages of geometric diodes

edit

Advantages

edit

Because all other diodes create asymmetry in current flow through some form of a potential barrier, they necessarily have some degree of a turn-on voltage. Geometric diodes could theoretically achieve zero-bias turn-on voltage due to their lack of potential barrier. With zero-bias turn-on voltage, there is no DC bias that must be supplied to the device; therefor, geometric diodes could greatly reduce the power needed to operate a device. This could also be beneficial in that the diodes would be more sensitive to small signals. This is of course theoretical, and truly zero-bias diodes may be limited from being experimentally realized.

A second major advantage also stems from their lack of potential barrier and minority carriers. A potential barrier is a large source of capacitance in a diode. Capacitance serves to decrease a diodes frequency response by increasing its RC time. Geometric diodes lack of potential barrier means they can have ultra-low capacitance down to the attofarads.[5] A geometric diode's frequency response is limited not by RC time or minority carrier mobility, but by the flight time of the charge carriers through the structural asymmetry.[6] Therefore, geometric diodes can achieve frequency response into the THz.[5]

The ability for a geometric diode's electronic properties to be tuned by the geometry of the structure, the surface coating on the structure, and the properties of the material used offer a level customization that is unrealized in any other diode system.

Principles learned from geometric diodes and ballistic systems will be used in understanding technology as devices become increasingly small and exist at or below charge carrier MFPs.

Disadvantages

edit

The same benefits from the lack of potential barrier also come with their share of downsides. The main one being that the reverse bias current from a geometric diode can be quite high (anywhere from three to less than one orders of magnitude less than the forward bias current). Depending on the application, a high reverse bias can be tolerated though.

Typically geometric diodes are on the nano-scale, so that necessarily means that they have high resistances. However, depending on the fabrication process this can be mitigated by stringing many diodes in parallel.

Perhaps the largest hurdle for geometric diodes to overcome is the reliability of their fabrication and ability to scale it up. Geometric diodes are typically made using nanofabrication methods that do not scale up well, but with the increasing resolution of photolithography this may not be a problem for long.

Experimental examples

edit

Geometric diodes are linked to the phenomena of electron ratchets, and their histories are intermingled.[7][8]

2DEG

edit

Early work on geometric diodes used 2D electron gasses (2DEG) at cryogenic temperatures because these material systems have a very long charge carrier MFP.[9][10] One of the most studied structures is a four-terminal geometry that either had a single antidot at the center, or an array of antidots that forces charges down instead of up when current is supplied from either the left or right.[11] This system was initially demonstrated at cryogenic temperatures,[9][12][13] but then was able to operate at room-temperature[14] and rectify signals of 50 GHz.[14]

Graphene

edit

The four-terminal geometries have also been created in graphene and function at room-temperature.[15][16] Additionally, a different, two-terminal geometry resembling the simple geometric diode schematic was demonstrated in 2013.[5] Optimum design for the ballistic diode based on graphene field-effect transistors in 2021 by Van Huy Nguyen.[17] This work showed rectification speeds at THz frequencies.

Nanowires

edit

Geometric diodes formed from etched Silicon nanowires were shown to operate at room-temperature in April 2020.[6] This work highlights the tunability of geometric diodes by thoroughly studying the effects of geometry on the diode's electronic properties. The work also demonstrated rectification up to an instrument-limited 40 GHz.

See also

edit

References

edit
  1. ^ Gall, Daniel (2016-02-23). "Electron mean free path in elemental metals". Journal of Applied Physics. 119 (8): 085101. Bibcode:2016JAP...119h5101G. doi:10.1063/1.4942216. ISSN 0021-8979.
  2. ^ Sze, S.M.; Ng, Kwok K. (2006-04-10). Physics of Semiconductor Devices. doi:10.1002/0470068329. ISBN 9780470068328.
  3. ^ Bolotin, K. I.; Sikes, K. J.; Jiang, Z.; Klima, M.; Fudenberg, G.; Hone, J.; Kim, P.; Stormer, H. L. (2008-06-01). "Ultrahigh electron mobility in suspended graphene". Solid State Communications. 146 (9): 351–355. arXiv:0802.2389. Bibcode:2008SSCom.146..351B. doi:10.1016/j.ssc.2008.02.024. ISSN 0038-1098. S2CID 118392999.
  4. ^ Umansky, V.; Heiblum, M.; Levinson, Y.; Smet, J.; Nübler, J.; Dolev, M. (2009-03-15). "MBE growth of ultra-low disorder 2DEG with mobility exceeding 35×106cm2/Vs". Journal of Crystal Growth. International Conference on Molecular Beam Epitaxy (MBE-XV). 311 (7): 1658–1661. Bibcode:2009JCrGr.311.1658U. doi:10.1016/j.jcrysgro.2008.09.151. ISSN 0022-0248.
  5. ^ a b c Zhu, Zixu; Joshi, Saumil; Grover, Sachit; Moddel, Garret (2013-04-15). "Graphene geometric diodes for terahertz rectennas". Journal of Physics D: Applied Physics. 46 (18): 185101. Bibcode:2013JPhD...46r5101Z. doi:10.1088/0022-3727/46/18/185101. ISSN 0022-3727. S2CID 9573157.
  6. ^ a b Custer, James P.; Low, Jeremy D.; Hill, David J.; Teitsworth, Taylor S.; Christesen, Joseph D.; McKinney, Collin J.; McBride, James R.; Brooke, Martin A.; Warren, Scott C.; Cahoon, James F. (2020-04-10). "Ratcheting quasi-ballistic electrons in silicon geometric diodes at room temperature". Science. 368 (6487): 177–180. Bibcode:2020Sci...368..177C. doi:10.1126/science.aay8663. ISSN 0036-8075. PMID 32273466. S2CID 215550903.
  7. ^ Lau, Bryan; Kedem, Ofer; Schwabacher, James; Kwasnieski, Daniel; Weiss, Emily A. (2017-05-09). "An introduction to ratchets in chemistry and biology". Materials Horizons. 4 (3): 310–318. doi:10.1039/C7MH00062F. ISSN 2051-6355.
  8. ^ Lau, Bryan; Kedem, Ofer (2020-05-22). "Electron ratchets: State of the field and future challenges". The Journal of Chemical Physics. 152 (20): 200901. Bibcode:2020JChPh.152t0901L. doi:10.1063/5.0009561. ISSN 0021-9606. PMID 32486653.
  9. ^ a b Song, A. M.; Lorke, A.; Kriele, A.; Kotthaus, J. P.; Wegscheider, W.; Bichler, M. (1998-04-27). "Nonlinear Electron Transport in an Asymmetric Microjunction: A Ballistic Rectifier". Physical Review Letters. 80 (17): 3831–3834. Bibcode:1998PhRvL..80.3831S. doi:10.1103/physrevlett.80.3831. ISSN 0031-9007.
  10. ^ Linke, H; Sheng, W; Löfgren, A; Xu, Hongqi; Omling, P; Lindelof, P. E (1998-11-01). "A quantum dot ratchet: Experiment and theory". Europhysics Letters (EPL). 44 (3): 341–347. Bibcode:1998EL.....44..341L. doi:10.1209/epl/i1998-00562-1. ISSN 0295-5075. S2CID 250894889.
  11. ^ Song, A.M. (2002-08-01). "Electron ratchet effect in semiconductor devices and artificial materials with broken centrosymmetry". Applied Physics A. 75 (2): 229–235. Bibcode:2002ApPhA..75..229S. doi:10.1007/s003390201334. ISSN 1432-0630. S2CID 94413242.
  12. ^ Lorke, A; Wimmer, S; Jager, B; Kotthaus, J. P; Wegscheider, W; Bichler, M (1998-06-17). "Far-infrared and transport properties of antidot arrays with broken symmetry". Physica B: Condensed Matter. 249–251 (1–4): 312–316. Bibcode:1998PhyB..249..312L. doi:10.1016/S0921-4526(98)00121-5. ISSN 0921-4526.
  13. ^ Song, A. M.; Manus, S.; Streibl, M.; Lorke, A.; Kotthaus, J. P.; Wegscheider, W.; Bichler, M. (1999-01-01). "A nonlinear transport device with no intrinsic threshold". Superlattices and Microstructures. 25 (1): 269–272. Bibcode:1999SuMi...25..269S. doi:10.1006/spmi.1998.0646. ISSN 0749-6036.
  14. ^ a b Song, A. M.; Omling, P.; Samuelson, L.; Seifert, W.; Shorubalko, I.; Zirath, H. (2001-08-22). "Room-temperature and 50 GHz operation of a functional nanomaterial". Applied Physics Letters. 79 (9): 1357–1359. Bibcode:2001ApPhL..79.1357S. doi:10.1063/1.1398324. ISSN 0003-6951.
  15. ^ Auton, Gregory; Zhang, Jiawei; Kumar, Roshan Krishna; Wang, Hanbin; Zhang, Xijian; Wang, Qingpu; Hill, Ernie; Song, Aimin (2016-05-31). "Graphene ballistic nano-rectifier with very high responsivity". Nature Communications. 7 (1): 11670. Bibcode:2016NatCo...711670A. doi:10.1038/ncomms11670. ISSN 2041-1723. PMC 4895026. PMID 27241162.
  16. ^ Zhang, Jiawei; Brownless, Joseph; Song, Aimin (September 2019). "High Performance Graphene Ballistic Rectifiers for THZ detection". 2019 44th International Conference on Infrared, Millimeter, and Terahertz Waves (IRMMW-THZ). pp. 1–2. doi:10.1109/IRMMW-THz.2019.8874198. ISBN 978-1-5386-8285-2. S2CID 204816235.
  17. ^ Nguyen, Van Huy; Nguyen, Dinh Cong; Kumar, Sunil; Kim, Minwook; Kang, Dongwoon; Lee, Yeonjae; Nasir, Naila; Rehman, Malik Abdul; Bach, Thi Phuong Anh; Jung, Jongwan; Seo, Yongho (2021-12-02). "Optimum design for the ballistic diode based on graphene field-effect transistors". npj 2D Materials and Applications. 5 (1): 1–8. doi:10.1038/s41699-021-00269-2. ISSN 2397-7132. S2CID 244780464.
Retrieved from "https://en.wikipedia.org/w/index.php?title=Geometric_diode&oldid=1243665190"