Wikipedia

George Devol

George Charles Devol Jr. (February 20, 1912 – August 11, 2011) was an American inventor, best known for creating Unimate, the first industrial robot.[1][2] The National Inventors Hall of Fame says, "Devol's patent for the first digitally operated programmable robotic arm represents the foundation of the modern robotics industry."[3]

George Devol
George Devol in 1982
Born(1912-02-20)February 20, 1912
Louisville, Kentucky
DiedAugust 11, 2011(2011-08-11) (aged 99)
Wilton, Connecticut
Occupation(s)Inventor, entrepreneur
SpouseEvelyn Jahelka

Early life

edit

George Devol was born in an upper-middle-class family in Louisville, Kentucky. He attended Riordan Prep school.[1]

United Cinephone

edit
 
Phantom Doorman automatic door

Foregoing higher education, Devol went into business in 1932, forming United Cinephone to produce variable area recording directly onto film for the new sound motion pictures ("talkies"). However, he later learned that companies like RCA and Western Electric were working in the same area, and discontinued the product.[1]

World War II

edit

In 1939, Devol applied for a patent for proximity controls for use in laundry press machines, based on a radio frequency field.[4] This control would automatically open and close laundry presses when workers approached the machines. After World War II began, the patent office told Devol that his patent application would be placed on hold for the duration of the conflict.[5]

Around that time, Devol sold his interest in United Cinephone and approached Sperry Gyroscope to pitch his ideas on radar technology. He was retained by Sperry as manager of the Special Projects Department, which developed radar devices and microwave test equipment.[1]

In 1943, he organized General Electronics Industries in Greenwich, Connecticut,[1] as a subsidiary of the Auto Ordnance Corporation. General Electronics produced counter-radar devices until the end of the war. General Electronics was one of the largest producers of radar and radar counter-measure equipment for the U.S. Navy, U.S. Army Air Force and other government agencies. The company's radar counter-measure systems were on Allied planes on D-Day.[5]

Over a difference of opinion regarding the future of certain projects, Devol resigned from Auto Ordinance and joined RCA. After a short stint as eastern sales manager of electronics products, which he felt "wasn't his ball of wax", Devol left RCA to develop ideas that eventually led to the patent application for the first industrial robot. In 1946, he applied for a patent on a magnetic recording system for controlling machines and a digital playback device for machines.[5]

Devol was part of the team that developed the first commercial use of microwave oven technology, the Speedy Weeny,[6] which automatically cooked and dispensed hotdogs in places such as Grand Central Terminal.

In the early 1950s, Devol licensed his digital magnetic recording device to Remington Rand of Norwalk, Connecticut, and became manager of their magnetics department. There he worked with a team to develop his magnetic recording system for business data applications. He also worked on developing the first high-speed printing systems. While the magnetic recording system proved too slow for business data, Devol's invention was re-purposed as a machine control that would eventually become the "brains" of the Unimate robot.[5]

The first industrial robot: Unimate

edit
Main article: Unimate
 
The first static magnetic recorder that used a saw blade to record information

In the 1940s, Devol was focusing on manipulators and his magnetic recording patents, but he took note of the introduction of automation into factories. In 1954, he applied for his robotics patent. U.S. patent 2,988,237, issued in 1961 for Programmed Article Transfer,[1] introduced the concept of universal automation, or Unimation. His wife Evelyn suggested the word "Unimate" to define the product, much the same as George Eastman had coined Kodak.[7]

 
U.S. Patent 2,988,237, issued in 1961 to Devol.

Devol wrote that his invention "makes available for the first time a more or less general purpose machine that has universal application to a vast diversity of applications where cyclic digital control is desired."[5]

After applying for this patent Devol searched for a company willing to give him financial backing to develop his programmable articles transfer system. He talked with many major corporations in the United States during his search. Through family connections, Devol obtained an audience with a partner in the firm Manning, Maxwell and Moore in Stratford, Connecticut. Joseph F. Engelberger, chief of engineering in the company's aircraft products division was very interested, and Devol agreed to license his patent and some future patents in the field to the company.[8] But the company was sold that year and its aircraft division was slated to be closed. Engelberger sought a backer to buy out the aircraft division and found one in Consolidated Diesel Electronic (Condec), which agreed to finance the continued development of the robot under a new division, Unimation Incorporated, with Engelberger as its president.[9]

The first Unimate prototypes were controlled by vacuum tubes used as digital switches though later versions used transistors. Most off-the-shelf components available in the late 1950s, such as digital encoders, were inadequate for the Unimate. With Devol's guidance, a team of engineers at Unimation designed and machined practically every part in the first Unimates.

In 1960, Devol personally sold the first Unimate robot, which was shipped in 1961 to General Motors.[10] GM first used the machine for die casting handling and spot welding.[11] The first Unimate robot was installed at GM's Inland Fisher Guide Plant in Ewing Township, New Jersey, in 1961 to lift hot pieces of metal from a die-casting machine and stack them.[12] Soon companies such as Chrysler, Ford, and Fiat saw the necessity for large Unimate purchases.

The company spent about $5 million to develop the first Unimate.[citation needed] In 1966, after many years of market surveys and field tests, full-scale production began in Connecticut. Unimation's first production robot was a materials handling robot and was soon followed by robots for welding and other applications.

In 1975, Unimation showed its first profit. In 1978, the PUMA (Programmable Universal Machine for Assembly) robot was developed by Unimation from Vicarm (Victor Scheinman) and with support from General Motors.

In 2005, Popular Mechanics magazine selected Devol's Unimate as one of the Top 50 Inventions of the Past 50 Years.[13]

Additional work

edit

Death

edit

Devol died on August 11, 2011, aged 99, at his home in Wilton, Connecticut. He was survived by two daughters, two sons, five grandchildren and five great-grandchildren. His funeral service was held in a Methodist church and he was laid to rest in Wilton.[16][17]

References

edit
  1. ^ a b c d e f "George Devol: A Life Devoted to Invention, and Robots". IEEE Spectrum.
  2. ^ "Father of robotics' who helped to revolutionise carmaking". Financial Times.
  3. ^ a b "George Devol Listing at NIHF". 14 January 2024.
  4. ^ https://georgedevol.com/patents/2395780_-_1939_-_Capacity_Controlled_Textile_Press.pdf [bare URL PDF]
  5. ^ a b c d e "The Father Of Modern Robotics: George Devol". Lifehacker. 2015-12-21.
  6. ^ Pearce, Jeremy (2011-08-15). "George C. Devol, Inventor of Robot Arm, Dies at 99". The New York Times.
  7. ^ vidyaonline.org - robot[dead link‍]
  8. ^ Handbook of Design, Manufacturing and Automation by Richard C. Dorf and Andrew Kusiak (Wiley-IEEE) Page 260 ISBN 978-0-471-55218-5
  9. ^ Robotics Research Group - The first robot: "Unimate" Archived 2008-03-08 at the Wayback Machine, University of Texas. Accessed August 14, 2011.
  10. ^ ""Unimate." Encyclopædia Britannica. 2008. Encyclopædia Britannica Online. 08 October 2008". Britannica.com. Retrieved 2012-03-15.
  11. ^ "The History and Benefits of Industrial Robots". Used-Robots.com. Archived from the original on 2012-03-21. Retrieved 2012-03-15.
  12. ^ Mickle, Paul. "1961: A peep into the automated future", The Trentonian. Accessed August 11, 2011. "Without any fanfare, the world's first working robot joined the assembly line at the General Motors plant in Ewing Township in the spring of 1961.... It was an automated die-casting mold that dropped red-hot door handles and other such car parts into pools of cooling liquid on a line that moved them along to workers for trimming and buffing. Its most distinct feature was a grip on a steel armature that eliminated the need for a man to touch car parts just made from molten steel."
  13. ^ "The Top 50 Inventions of the Past 50 Years". Popular Mechanics. Retrieved 2012-03-15.
  14. ^ "SME Honorary Members" (PDF). Society of Manufacturing Engineers. June 20, 2011. Retrieved August 21, 2011.[permanent dead link‍]
  15. ^ "Automation Hall of Fame". pearcedesign.com. Archived from the original on 2012-03-21. Retrieved 2011-03-18.
  16. ^ Pearce, Jeremy. "George C. Devol, Inventor of Robot Arm, Dies at 99", The New York Times, August 15, 2011. Accessed August 14, 2011.
  17. ^ MacEachern, Frank (17 August 2011). "Robotics pioneer George Devol, a former Greenwich resident, dies at 99". Connecticut Post. CTPost August 16, 2011
edit
Retrieved from "https://en.wikipedia.org/w/index.php?title=George_Devol&oldid=1243628900"