This article has multiple issues. Please help improve it or discuss these issues on the talk page. (Learn how and when to remove these messages)
|
In safety engineering, a Guillotine Test simulates an arc fault condition between parallel conductors or a cut wire, replicating the conditions that result from arc faults and which can lead to fires in adjacent material and wires, for example during accidents.[1] Based upon a dry arc test method used for testing wire insulation material, this test was originally developed for arc-fault circuit interrupters. Here is a sample test schematic, showing the logic flow of one guillotine test. It shows the guidelines on whether to retest or if the test was passed or failed.
Testing of this type plays an important role in helping researchers who are looking into wiring faults in aircraft, submarine communication cables, etc.[2] This can lead to products that are able to quickly identify and locate these wiring faults for easier and less costly repairs and an overall safer environment.
See also
editReferences
edit- ^ Graf, Alfons (2001). The new automotive 42V PowerNet: preparing for mass production. ISBN 978-3-8169-1992-6. Retrieved 29 August 2011.
- ^ See, for example, Stephenson, James, Ph.D. "Eliminating False Positives in the Detection and Location of sub 3ms Faults on AC/DC Lines" presented at the 2011 Aircraft Airworthiness & Sustainment Conference on April 19, 2011.