Hop-up (airsoft)

Hop-up is the backspin put on airsoft pellets and BBs to increase their range via the Magnus effect.

Soft airgun projectile rotation via "Hop-Up" mechanism

Hop-up devices apply backspin to the projectile reducing the air pressure on its top side. This causes the plastic pellet to fall less over a given distance than it would without the spin applied, extending the effective range of the weapon without increasing velocity. It allows the mechanism to shoot BBs in a curved trajectory.

There are two main types of hop-up systems: mechanical and electronic. Mechanical hop-up systems use a dial or lever to adjust the amount of backspin applied to the BB. These systems are typically found in lower-end airsoft guns and are easier to use and maintain.

Electronic hop-up systems, on the other hand, use an electric motor to control the amount of backspin applied to the BB. These systems are found in higher-end airsoft guns and offer more precise control over the amount of backspin. They also often include a battery and display, making it easier to adjust the hop-up in real-time.

In airsoft guns, this is usually implemented as a projection (called a bucking) into the path of the projectile, on the top of the barrel. The bucking momentarily hinders the top side of the projectile, imparting a backspin that can exceed 1,000 rpm (17 rotations per second). This is usually adjustable so that the effect can be tuned to suit the weight or speed of the projectile and each player's preference.

The primary cause of the lift is the Magnus effect. There is a layer of non-moving air (the boundary layer) on its surface. In the case of a spinning ball, this layer gets thrown off at an angle. Newton's laws state that in order for air to be thrown in one direction, the ball has to move in the opposite direction. According to the Magnus explanation, the rotating ball would throw air downward and to the rear, thus giving lift. The boundary layers on the top and bottom separate unevenly, creating a wake that is lower than the middle of the ball, appearing like a comet's tail pointing down. This can be verified in wind tunnels and is well documented in fluid dynamics textbooks.