The INA Model 953 is a Brazilian submachine gun, manufacturead and based on the Madsen M/50.[2]
| INA Model 953 | |
|---|---|
.jpg) INA Model 953 with unfolded stock. | |
| Type | Sub machine gun |
| Place of origin | Brazil |
| Service history | |
| In service | 1950 - late 1980s? |
| Wars | Suez Crisis Araguaia Guerrilla War[1] |
| Production history | |
| Designer | Dansk Industri Syndikat |
| Designed | 1950 |
| Manufacturer | Indústria Nacional de Armas |
| Variants | M.B.-50 |
| Specifications | |
| Mass | 7.50 Pounds (3.4 kg) |
| Length | 31.26" with stock open |
| Caliber | .45 ACP |
| Action | Blowback-operated, Open bolt |
| Rate of fire | 650 rpm |
| Muzzle velocity | 740 ft/s |
| Effective firing range | 100 m |
| Feed system | 30-round detachable box magazine |
| Sights | Single aperature set for 100 m |
This article needs additional citations for verification. (January 2024) |
Revolutionary Carlos Marighella recommended this as the "ideal submachine gun for the urban guerrilla" in his "Minimanual of the Urban Guerrilla"[3]
History
editIt was manufactured by the Indústria Nacional de Armas in São Paulo Brazil under license for Madsen, which began in 1950.[4]
Design
editThe first Model was marked M.B.-50 and was manufactured till 1953 and was marked with a large Brazilian crest. In late 1953, the Model 1953 was introduced. Improvements on the 1953 model were a larger magazine housing and a metal loop riveted to the lower right side of the magazine housing. The loop could then hold the magazine housing together. Also the retracting handle was changed on the Model 953 to the right side instead of the top as was the buffer spring and the shape of the extractor, ejector and the firing pin.
The INA Model 53 is made of stamped sheet metal. It's an open bolt design which means it fires when the bolt is in the locked back open position with a fixed firing pin. The firearm is stamped from 2 pieces of sheet metal which are shaped with integral rear pistol grip and magazine housing. The two pieces fit together like a clam shell with the hinge at the rear of the pistol grip. It splits in half right down the middle of the top and bottom of the receiver.
The entire firearm is held together with a barrel locking nut which is threaded onto the fore section of the two receiver halves. The folding stock is made of tubular steel and it folds onto the right side of the firearm.
The Model 953 fires in full auto only and it also has a unique feature, a safety lever in front of the forward magazine housing. To fire the Model 953 you must grip the magazine housing and hold down the safety lever.
Users
edit.jpg)
Non-State Actors
editReferences
edit- ^ Arroyo, Ângelo (1974). Relatório Sobre a Luta no Araguaia. Marxists Internet Archive (Report).
- ^ a b "Brazil's INA submachine gun reloaded – Part 1 -". The Firearm Blog. 2018-02-19. Retrieved 2023-11-30.
- ^ "Minimanual of the Urban Guerrilla"
- ^ https://www.smallarmssurvey.org/sites/default/files/resources/SAS-SR11-Small-Arms-in-Brazil.pdf
- ^ "Relatório sobre a luta no Araguaia". 2017-07-11. Archived from the original on 2017-07-11. Retrieved 2023-11-29.
- ^ "Por trás de uma pistola 45: Gênero e guerrilha no Brasil. 1968-1973" (PDF).
- ^ "1970: Oban afirma ter desbaratado a VAR-Palmares". Folha de S.Paulo (in Brazilian Portuguese). 2020-01-28. Retrieved 2023-11-06.
Bibliography
edit- Nelson, Thomas B. The world's Submachine Guns. International small arms publishers: Cologne, Germany, '63