This article needs additional citations for verification. (August 2021) |
The Ingenieurbüro Glückauf was a department of the Reich Ministry of Armaments and War Production, which during the Second World War was the design office of the Hauptausschuß Schiffbau. It completed construction and production plans for U-Boats of the Kriegsmarine. This affected both submarine types that were designed for the U-boat war, as well as midget submarines which were used by the small combat units of the Kriegsmarine.
Tasks, projects and localization
editThe Ingenieurbüro Glückauf was abbreviated as IBG.[1] It was entrusted with the design and production planning of German submarines for the Navy during the final phases of World War II, for example the Type XXI submarine or the Type XXVII submarine.
Towards the end of 1944, the design and production planning for the Type XXVI, which used the Walter engine, was completed. For this purpose, the IBG designers produced construction drawings in the partial sheet system, from which the sequence of production and assembly could be seen. This method was used for the first time in German shipbuilding in the construction of the Type XXVI. Previously, the partial blade system was only used in inland steel construction.
The IBG was one of the central design offices of the Hauptausschuß Schiffbau (HAS) and had two branches in the Harz highlands. In the offices in Blankenburg and Halberstadt there were an average of 650 employees from summer 1943 to March 1945.[2]
References
edit- ^ Institut für Zeitgeschichte: Ämter, Abkürzungen, Aktionen des NS-Staates: K.G. Saur, München 1997, Seite 300.
- ^ Eberhard Rössler: Geschichte des deutschen U-Boot-Baus. Band 2: Entwicklung, Bau und Eigenschaften der deutschen U-Boote von 1943 bis heute. Bernard & Graefe Verlag, Bonn 1996, Seite 356.