The Lancer 28T Mark V, or Mark 5, is an American trailerable sailboat that was designed by W. Shad Turner as a cruiser and first built in 1982.[1][2][3]
Development | |
---|---|
Designer | W. Shad Turner |
Location | United States |
Year | 1982 |
Builder(s) | Lancer Yachts |
Role | Cruiser |
Name | Lancer 28T Mark V |
Boat | |
Displacement | 5,200 lb (2,359 kg) |
Draft | 3.00 ft (0.91 m) |
Hull | |
Type | monohull |
Construction | fiberglass |
LOA | 27.67 ft (8.43 m) |
LWL | 23.92 ft (7.29 m) |
Beam | 8.00 ft (2.44 m) |
Engine type | Yanmar 7.6 hp (6 kW) diesel engine |
Hull appendages | |
Keel/board type | fin keel |
Ballast | 2,600 lb (1,179 kg) |
Rudder(s) | internally-mounted spade-type rudder |
Rig | |
Rig type | Bermuda rig |
I foretriangle height | 28.50 ft (8.69 m) |
J foretriangle base | 10.50 ft (3.20 m) |
P mainsail luff | 29.00 ft (8.84 m) |
E mainsail foot | 11.00 ft (3.35 m) |
Sails | |
Sailplan | fractional rigged sloop |
Mainsail area | 159.50 sq ft (14.818 m2) |
Jib/genoa area | 149.63 sq ft (13.901 m2) |
Total sail area | 309.13 sq ft (28.719 m2) |
Production
editThe design was built by Lancer Yachts in the United States, starting in 1982, but it is now out of production.[1][3][4]
Design
editThe Lancer 28T Mark V is a recreational keelboat, built predominantly of fiberglass, with wood trim. It has a fractional sloop rig, a raked stem, a slightly angled transom, an internally mounted spade-type/ rudder controlled by a wheel or a tiller and a fixed fin keel. It displaces 5,200 lb (2,359 kg) and carries 2,600 lb (1,179 kg) of ballast.[1][3]
The boat has a draft of 3.00 ft (0.91 m) with the standard keel. The keel is wide and has a dropped cabin floor into it to increase headroom to 6.17 ft (188 cm).[1]
The boat is normally fitted with a small outboard motor, but can be optionally equipped with a Japanese Yanmar inboard diesel engine of 7.5 hp (6 kW) for docking and maneuvering.[1][3]
The design has sleeping accommodation for four people, with a straight settee in the main cabin, a drop-down dinette table and an aft cabin with two single berths. The galley is located on both sides just forward of the companionway ladder. The galley is equipped with a two-burner stove to port and a sink to starboard. The head is located just aft of the bow storage area and includes a sink. The fresh water tank has a capacity of 15 U.S. gallons (57 L; 12 imp gal).[1][3]
The design has a hull speed of 6.55 kn (12.13 km/h).[3]
See also
editReferences
edit- ^ a b c d e f McArthur, Bruce (2020). "Lancer 28T Mk5 sailboat". sailboatdata.com. Archived from the original on 14 July 2021. Retrieved 17 July 2021.
- ^ McArthur, Bruce (2021). "W. Shad Turner". sailboatdata.com. Archived from the original on 29 August 2020. Retrieved 17 July 2021.
- ^ a b c d e f Sea Time Tech, LLC (2022). "Lancer 28T Mark 5". sailboat.guide. Archived from the original on 18 April 2022. Retrieved 18 April 2022.
- ^ McArthur, Bruce (2021). "Lancer Yacht Corp. (USA) 1974 - 1986". sailboatdata.com. Archived from the original on 20 June 2021. Retrieved 17 July 2021.