In mathematics, the eccentricity of a conic section is a non-negative real number that uniquely characterizes its shape.
![](http://upload.wikimedia.org/wikipedia/commons/thumb/0/05/Eccentricity.png/280px-Eccentricity.png)
One can think of the eccentricity as a measure of how much a conic section deviates from being circular. In particular:
- The eccentricity of a circle is 0.
- The eccentricity of an ellipse which is not a circle is between 0 and 1.
- The eccentricity of a parabola is 1.
- The eccentricity of a hyperbola is greater than 1.
- The eccentricity of a pair of lines is
Two conic sections with the same eccentricity are similar.
Definitions
editAny conic section can be defined as the locus of points whose distances to a point (the focus) and a line (the directrix) are in a constant ratio. That ratio is called the eccentricity, commonly denoted as e.
The eccentricity can also be defined in terms of the intersection of a plane and a double-napped cone associated with the conic section. If the cone is oriented with its axis vertical, the eccentricity is[1]
where β is the angle between the plane and the horizontal and α is the angle between the cone's slant generator and the horizontal. For the plane section is a circle, for a parabola. (The plane must not meet the vertex of the cone.)
The half-focal separation of an ellipse or hyperbola, denoted c (or sometimes f or e), is the distance between its center and either of its two foci. The eccentricity can be defined as the ratio of the half-focal separation to the semimajor axis a: that is, (lacking a center, the half-focal separation for parabolas is not defined). It is worth to note that a parabola can be treated as an ellipse or a hyperbola, but with one focal point at infinity.
Alternative names
editIn the case of ellipses and hyperbolas the half-focal separation is sometimes called the linear eccentricity.
Notation
editThree notational conventions are in common use:
- e for the eccentricity and c for the half-focal separation.
Values
editConic section | Equation | Eccentricity (e) | Linear eccentricity (c) |
---|---|---|---|
Circle | |||
Ellipse | or where | ||
Parabola | undefined ( ) | ||
Hyperbola | or |
Here, for the ellipse and the hyperbola, a is the length of the semi-major axis and b is the length of the semi-minor axis.
When the conic section is given in the general quadratic form
the following formula gives the eccentricity e if the conic section is not a parabola (which has eccentricity equal to 1), not a degenerate hyperbola or degenerate ellipse, and not an imaginary ellipse:[2]
where if the determinant of the 3×3 matrix
is negative or if that determinant is positive.
Ellipses
editThe eccentricity of an ellipse is strictly less than 1. When circles (which have eccentricity 0) are counted as ellipses, the eccentricity of an ellipse is greater than or equal to 0; if circles are given a special category and are excluded from the category of ellipses, then the eccentricity of an ellipse is strictly greater than 0.
For any ellipse, let a be the length of its semi-major axis and b be the length of its semi-minor axis. In the coordinate system with origin at the ellipse's center and x-axis aligned with the major axis, points on the ellipse satisfy the equation
with foci at coordinates for
We define a number of related additional concepts (only for ellipses):
Name | Symbol | in terms of a and b | in terms of e |
---|---|---|---|
First eccentricity | |||
Second eccentricity | |||
Third eccentricity | |||
Angular eccentricity |
Other formulae for the eccentricity of an ellipse
editThe eccentricity of an ellipse is, most simply, the ratio of the linear eccentricity c (distance between the center of the ellipse and each focus) to the length of the semimajor axis a.
The eccentricity is also the ratio of the semimajor axis a to the distance d from the center to the directrix:
The eccentricity can be expressed in terms of the flattening f (defined as for semimajor axis a and semiminor axis b):
(Flattening may be denoted by g in some subject areas if f is linear eccentricity.)
Define the maximum and minimum radii and as the maximum and minimum distances from either focus to the ellipse (that is, the distances from either focus to the two ends of the major axis). Then with semimajor axis a, the eccentricity is given by
which is the distance between the foci divided by the length of the major axis.
Hyperbolas
editThe eccentricity of a hyperbola can be any real number greater than 1, with no upper bound. The eccentricity of a rectangular hyperbola is .
Quadrics
editThe eccentricity of a three-dimensional quadric is the eccentricity of a designated section of it. For example, on a triaxial ellipsoid, the meridional eccentricity is that of the ellipse formed by a section containing both the longest and the shortest axes (one of which will be the polar axis), and the equatorial eccentricity is the eccentricity of the ellipse formed by a section through the centre, perpendicular to the polar axis (i.e. in the equatorial plane). But: conic sections may occur on surfaces of higher order, too (see image).
Celestial mechanics
editIn celestial mechanics, for bound orbits in a spherical potential, the definition above is informally generalized. When the apocenter distance is close to the pericenter distance, the orbit is said to have low eccentricity; when they are very different, the orbit is said be eccentric or having eccentricity near unity. This definition coincides with the mathematical definition of eccentricity for ellipses, in Keplerian, i.e., potentials.
Analogous classifications
editThis section needs expansion. You can help by adding to it. (March 2009) |
A number of classifications in mathematics use derived terminology from the classification of conic sections by eccentricity:
- Classification of elements of SL2(R) as elliptic, parabolic, and hyperbolic – and similarly for classification of elements of PSL2(R), the real Möbius transformations.
- Classification of discrete distributions by variance-to-mean ratio; see cumulants of some discrete probability distributions for details.
- Classification of partial differential equations is by analogy with the conic sections classification; see elliptic, parabolic and hyperbolic partial differential equations.[3]
See also
editReferences
edit- ^ Thomas, George B.; Finney, Ross L. (1979), Calculus and Analytic Geometry (fifth ed.), Addison-Wesley, p. 434. ISBN 0-201-07540-7
- ^ Ayoub, Ayoub B., "The eccentricity of a conic section", The College Mathematics Journal 34(2), March 2003, 116-121.
- ^ "Classification of Linear PDEs in Two Independent Variables". Retrieved 2 July 2013.