name | Bhutan | |||
---|---|---|---|---|
border coordinates | ||||
28.5 | ||||
88.6 | ←↕→ | 92.3 | ||
26.4 | ||||
map center | 27°27′N 90°27′E / 27.45°N 90.45°E | |||
image | Bhutan location map.svg
| |||
image1 | Bhutan relief map.svg
| |||
image2 | Bhutan physical map.svg
| |||
image3 | Bhutan highways blank location map.png
| |||
image4 | Bhutan protected areas location map.png
| |||
image5 | Jigme Dorji protected area location map.png
| |||
image6 | Jigme Singye protected area location map.png
| |||
image7 | Khaling protected area location map.png
| |||
image8 | Phibsoo protected area location map.png
| |||
image9 | Thrumshingla protected area location map.png
| |||
image10 | Torsa protected area location map.png
| |||
image11 | Wangchuck Centennial protected area location map.png
| |||
Module:Location map/data/Bhutan is a location map definition used to overlay markers and labels on an equirectangular projection map of Bhutan. The markers are placed by latitude and longitude coordinates on the default map or a similar map image.
Usage
These definitions are used by the following templates when invoked with parameter "Bhutan":
{{Location map|Bhutan |...}}
{{Location map many|Bhutan |...}}
{{Location map+|Bhutan |...}}
{{Location map~|Bhutan |...}}
Map definition
name = Bhutan
- Name used in the default map caption
image = Bhutan location map.svg
- The default map image, without "Image:" or "File:"
image1 = Bhutan relief map.svg
- An alternative map image, usually a relief map, which can be displayed via the relief or AlternativeMap parameters
image2 = Bhutan physical map.svg
image3 = Bhutan highways blank location map.png
image4 = Bhutan protected areas location map.png
- Alternative map images which can be displayed via the AlternativeMap parameter
top = 28.5
- Latitude at top edge of map, in decimal degrees
bottom = 26.4
- Latitude at bottom edge of map, in decimal degrees
left = 88.6
- Longitude at left edge of map, in decimal degrees
right = 92.3
- Longitude at right edge of map, in decimal degrees
Alternative map
The {{Location map}}, {{Location map many}}, and {{Location map+}} templates have parameters to specify an alternative map image. The map displayed as image1 can be used with the relief or AlternativeMap parameters. The maps displayed as image2 / image3 / image4 can be used with the AlternativeMap parameter. Examples may be found below or in the following:
Precision
Longitude: from West to East this map definition covers 3.7 degrees.
- At an image width of 200 pixels, that is 0.0185 degrees per pixel.
- At an image width of 1000 pixels, that is 0.0037 degrees per pixel.
Latitude: from North to South this map definition covers 2.1 degrees.
- At an image height of 200 pixels, that is 0.0105 degrees per pixel.
- At an image height of 1000 pixels, that is 0.0021 degrees per pixel.
Examples using location map templates
Location map, using default map (image)
{{Location map | Bhutan | width = 250 | lat_deg = 27.47 | lon_deg = 89.64 | label = Thimphu }}
Location map many, using relief map (image1)
{{Location map many | Bhutan | relief = yes | width = 250 | caption = Two locations in Bhutan | lat1_deg = 27.47 | lon1_deg = 89.64 | label1 = Thimphu | lat2_deg = 26.85 | lon2_deg = 89.38 | label2 = Phuntsholing }}
Location map+, using AlternativeMap
{{Location map+ | Bhutan | AlternativeMap = Bhutan physical map.svg | caption = Two locations in Bhutan | width = 250 | places = {{Location map~ | Bhutan | lat_deg = 27.47 | lon_deg = 89.64 | label = Thimphu }} {{Location map~ | Bhutan | lat_deg = 26.85 | lon_deg = 89.38 | label = Phuntsholing }} }}
See also
Location map templates
- Template:Location map, to display one mark and label using latitude and longitude
- Template:Location map many, to display up to nine marks and labels
- Template:Location map+, to display an unlimited number of marks and labels