| name | Cape Verde | |||
|---|---|---|---|---|
| border coordinates | ||||
| 17.4 | ||||
| -25.6 | ←↕→ | -22.4 | ||
| 14.6 | ||||
| map center | 16°N 24°W / 16°N 24°W | |||
| image | Cape Verde location map.svg
| |||
| ||||
| image1 | Cape Verde location map Topographic.png
| |||
| ||||
Module:Location map/data/Cape Verde is a location map definition used to overlay markers and labels on an equirectangular projection map of Cape Verde. The markers are placed by latitude and longitude coordinates on the default map or a similar map image.
Usage
These definitions are used by the following templates when invoked with parameter "Cape Verde":
{{Location map|Cape Verde |...}}{{Location map many|Cape Verde |...}}{{Location map+|Cape Verde |...}}{{Location map~|Cape Verde |...}}
Map definition
name = Cape Verde- Name used in the default map caption
image = Cape Verde location map.svg- The default map image, without "Image:" or "File:"
image1 = Cape Verde location map Topographic.png- An alternative map image, usually a relief map, which can be displayed via the relief or AlternativeMap parameters
top = 17.4- Latitude at top edge of map, in decimal degrees
bottom = 14.6- Latitude at bottom edge of map, in decimal degrees
left = -25.6- Longitude at left edge of map, in decimal degrees
right = -22.4- Longitude at right edge of map, in decimal degrees
Alternative map
The {{Location map}}, {{Location map many}}, and {{Location map+}} templates have parameters to specify an alternative map image. The map displayed as image1 can be used with the relief or AlternativeMap parameters. Examples may be found below or in the following:
Precision
Longitude: from West to East this map definition covers 3.2 degrees.
- At an image width of 200 pixels, that is 0.016 degrees per pixel.
- At an image width of 1000 pixels, that is 0.0032 degrees per pixel.
Latitude: from North to South this map definition covers 2.8 degrees.
- At an image height of 200 pixels, that is 0.014 degrees per pixel.
- At an image height of 1000 pixels, that is 0.0028 degrees per pixel.
Examples using location map templates
Location map, using default map (image)
{{Location map | Cape Verde
| width = 250
| lat_deg = 14.921
| lon_deg = -23.508
| label = Praia
}}
Location map many, using relief map (image1)
{{Location map many | Cape Verde
| relief = yes
| width = 250
| caption = Two locations in Cape Verde
| lat1_deg = 14.921
| lon1_deg = -23.508
| label1 = Praia
| lat2_deg = 16.9
| lon2_deg = -24.983
| label2 = Mindelo
}}
Location map+, using AlternativeMap
{{Location map+ | Cape Verde
| AlternativeMap = Cape Verde location map Topographic.png
| width = 250
| caption = Two locations in Cape Verde
| places =
{{Location map~ | Cape Verde
| lat_deg = 14.921
| lon_deg = -23.508
| label = Praia
}}
{{Location map~ | Cape Verde
| lat_deg = 16.9
| lon_deg = -24.983
| label = Mindelo
}}
}}
See also
Location map templates
- Template:Location map, to display one mark and label using latitude and longitude
- Template:Location map many, to display up to nine marks and labels
- Template:Location map+, to display an unlimited number of marks and labels