The Motorola 68881 and Motorola 68882 are floating-point units (FPUs) used in some computer systems in conjunction with Motorola's 32-bit 68020 or 68030 microprocessors. These coprocessors are external chips, designed before floating point math became standard on CPUs. The Motorola 68881 was introduced in 1984.[1] The 68882 is a higher performance version produced later.

Motorola 68881 FPU

Overview

edit
 
A Motorola 68882 FPU

The 68020 and 68030 CPUs were designed with the separate 68881 chip in mind. Their instruction sets reserved the "F-line" instructions – that is, all opcodes beginning with the hexadecimal digit "F" could either be forwarded to an external coprocessor or be used as "traps" which would throw an exception, handing control to the computer's operating system. If an FPU is not present in the system, the OS would then either call an FPU emulator to execute the instruction's equivalent using 68020 integer-based software code, return an error to the program, terminate the program, or crash and require a reboot.

Architecture

edit
Motorola 68881/68882 series registers
79 ... 63 ... 00 (bit position)
Floating point registers
± exponent mantissa FP0
± exponent mantissa FP1
± exponent mantissa FP2
± exponent mantissa FP3
± exponent mantissa FP4
± exponent mantissa FP5
± exponent mantissa FP6
± exponent mantissa FP7
  31 ... 23 ... 15 ... 07 ... 00 (bit position)
Control register
  0 0 Exception Enable Mode Control FPCR
Status register
  Condition Quotient Exception Status Accrued Exception FPSR
Instruction address register
  32 Bit Address FPIAR

The 68881 has eight 80-bit data registers (a 64-bit mantissa plus a sign bit, and a 15-bit signed exponent).[2] It allows seven different modes of numeric representation, including single-precision floating point, double-precision floating point, extended-precision floating point, integers as 8-, 16- and 32-bit quantities and a floating-point Binary-coded decimal format. The binary floating point formats are as defined by the IEEE 754 floating-point standard. It was designed specifically for floating-point math and is not a general-purpose CPU. For example, when an instruction requires any address calculations, the main CPU handles them before the 68881 takes control.

The CPU/FPU pair are designed such that both can run at the same time. When the CPU encounters a 68881 instruction, it hands the FPU all operands needed for that instruction, and then the FPU releases the CPU to go on and execute the next instruction.

68882

edit
 
Die of Motorola 68882

The 68882 is an improved version of the 68881, with better pipelining, and eventually available at higher clock speeds.[3][4] Its instruction set is exactly the same. Motorola claimed in some marketing literature that it executes some instructions 40% faster than a 68881 at the same clock speed, though this did not reflect typical performance, as seen by its more modest improvement in the table below. The 68882 is pin compatible with the 68881 and can be used as a direct replacement in most systems. The most important software incompatibility is that the 68882 uses a larger FSAVE state frame, which affects UNIX and other preemptive multitasking OSes that had to be modified to allocate more space for it.

Usage

edit

The 68881 or 68882 were used in the Sun Microsystems Sun-3 workstations, IBM RT PC workstations, Apple Computer Macintosh II family, NeXT Computer, Sharp X68000, Amiga 3000, Convergent Technologies MightyFrame, Atari Mega STE, TT, and Falcon. Some[which?] third-party Amiga and Atari products used the 68881 or 68882 as a memory-mapped peripheral to the 68000.

Versions

edit

68881

edit
  • 155,000 transistors on-chip
  • 12 MHz version
  • 16 MHz version ran at 160 kFLOPS
  • 20 MHz version ran at 192 kFLOPS
  • 25 MHz version ran at 240 kFLOPS

68882

edit
  • 176,000 transistors on-chip
  • 25 MHz version ran at 264 kFLOPS
  • 33 MHz version ran at 352 kFLOPS
  • 40 MHz version ran at 422 kFLOPS
  • 50 MHz version ran at 528 kFLOPS

These statistics came from the comp.sys.m68k FAQ.[3] No statistics are listed for the 16 MHz and 20 MHz 68882, though these chips were indeed produced.

Legacy

edit

Starting with the Motorola 68040, floating point support was included in the CPU itself.

References

edit
  1. ^ Sterling, Thomas; Anderson, Matthew; Brodowicz, Maciej (2017). High Performance Computing: Modern Systems and Practices. Morgan Kaufmann. p. 459. ISBN 978-0-12-420158-3.
  2. ^ MC68881 Technical Summary HCMOS Floating Point Coprocessor (PDF), MC68000 Family Reference Manual, Motorola
  3. ^ a b Boys, Robert (1996-01-06). "Frequently Asked Questions (FAQ) comp.sys.m68k". faqs.org. Retrieved 2023-06-23.
  4. ^ MC68882 Technical Summary HCMOS Floating Point Coprocessor (PDF), MC68000 Family Reference Manual, Motorola
Notes