Norfolk and Western 2050

Norfolk and Western 2050 is a Y3a class 2-8-8-2 Compound Mallet steam locomotive built in March 1923 by the American Locomotive Company's (ALCO) Richmond, Virginia Works for the Norfolk and Western Railway (N&W). The locomotive primarily helped haul the N&W's freight and coal trains, but by the end of the 1950s, it was relegated as a hump yard switcher.

Norfolk and Western 2050
Norfolk and Western 2050 on static display at the Illinois Railway Museum on September 19, 2015
Type and origin
References:[1][2][3]
Power typeSteam
BuilderALCO's Richmond Works
Serial number64070
Build dateMarch 1923
Specifications
Configuration:
 • Whyte2-8-8-2
 • UIC(1′D)D1′ hv4
Gauge4 ft 8+12 in (1,435 mm)
Leading dia.30 in (760 mm)
Driver dia.57 in (1,400 mm)
Trailing dia.30 in (760 mm)
Tender wheels33 in (840 mm)
Wheelbase67 ft 4 in (20.52 m) ​
 • incl. tender93 ft 3 in (28.42 m)
Length113 ft 3 in (34.52 m)
Width11 ft 3 in (3.43 m)
Height15 ft 8+58 in (4.79 m)
Adhesive weight478,000 lb (217,000 kg)
Loco weight531,000 lb (241,000 kg)
Tender weight209,100 lb (94,800 kg)
Total weight740,100 lb (335,700 kg)
Fuel typeCoal
Fuel capacity30 t (30 long tons; 33 short tons)
Water cap.22,000 US gal (83,000 L; 18,000 imp gal)
Firebox:
 • Grate area96 sq ft (8.9 m2)
Boiler:
 • TypeStraight Top
 • Diameter98 in (2,500 mm)
 • Small tubes2+14 in (57 mm)
 • Large tubes5+12 in (140 mm)
Boiler pressure270 psi (1.862 MPa)
Heating surface:
 • Firebox435 sq ft (40.4 m2)
 • Tubes3,860 sq ft (359 m2)
 • Flues1,825 sq ft (169.5 m2)
 • Total surface6,120 sq ft (569 m2)
Superheater:
 • Heating area145 sq ft (13.5 m2)
CylindersFour: two low-pressure (front), two high-pressure (rear)
High-pressure cylinder25 in × 32 in (640 mm × 810 mm)
Low-pressure cylinder39 in × 32 in (990 mm × 810 mm)
Valve gearBaker
Valve typePiston
Loco brake6ET[4]
Performance figures
Tractive effort(Simple: 136,985 lbf (609.3 kN)) (Compound: 114,154 lbf (507.8 kN))[5]
Career
OperatorsNorfolk and Western Railway
ClassY3a
Number in class1 of 30
NumbersN&W 2050
Retired1959
Preserved1975
Current ownerIllinois Railway Museum
DispositionOn static display

Retired from service in 1959, No. 2050 was sold for scrap to the Armco Steel Corporation of Middletown, Ohio, but it was withheld as a stationary boiler. Following some conversations and sentimentality between Armco employees and Illinois Railway Museum (IRM) members, the locomotive was donated to the IRM in 1975, and it was moved to their property in Union, Illinois the following year. As of 2024, No. 2050 is on static display at the IRM.

History

edit

Construction and design

edit

Throughout 1919, the Norfolk and Western Railway (N&W), which was in need of larger steam locomotives to handle their rising coal traffic over the Blue Ridge Mountains, received fifty United States Railroad Administration (USRA) 2-8-8-2 compound "Mallets" from the American Locomotive Company (ALCO) and the Baldwin Locomotive Works, and the railway classified them as Y3's (Nos. 2000-2049).[1] The USRA 2-8-8-2's were based on the N&W's prototype Y2 class 2-8-8-2 No. 1700, but with some alterations being made to improve its performance.[6]

They were built with 57-inch (1,400 mm) diameter driving wheels, 25-by-32-inch (640 mm × 810 mm) high-pressure cylinders, 36-by-32-inch (910 mm × 810 mm) low-pressure cylinders, and an operating boiler pressure of 240 psi (1.7 MPa), and they were capable of producing 106,000 lbf (471.51 kN) of tractive effort with compound expansion.[1][2] They were also equipped with a Mellin type by-pass and intercepting valve to change its operations between Simple and Compound.[7] Their tenders originally carried 16 short tons (32,000 lb) of coal and 12,000 US gallons (45,000 L) of water.[2]

The N&W was so satisfied with the Y3's performances that throughout 1923, the company ordered thirty identical copies of the USRA 2-8-8-2's from ALCO's Richmond, Virginia works, and they were classified as Y3a's (Nos. 2050-2079).[1][8] Beginning in the late 1920s, the N&W rebuilt and modified their Y3's and Y3a's; their boiler pressure was boosted to 270 psi (1.9 MPa), which in turn boosted their tractive effort to 136,985 lbf (609.34 kN) with simple expansion and 114,154 lbf (507.78 kN) with compound expansion.[5] Their tenders were upgraded to hold 30 short tons (60,000 lb) of coal and 22,000 US gallons (83,000 L) of water.[5]

Revenue service and retirement

edit

No. 2050 was the first locomotive of the Y3a class, being built as part of the first batch of ten locomotives in March 1923.[8][3] No. 2050 quickly joined the older Y3 locomotives in service, being used to pull heavy drag-speed coal trains over steep grades in the Blue Ridge Mountains.[1][9] By the early 1950s, No. 2050 was reassigned to pull local freight trains in the N&W's Radford Division in and out of Roanoke, Virginia.[10]

Towards the end of the decade, No. 2050 was reassigned again as a hump switcher in Williamson, West Virginia, and then it was transferred to Portsmouth, Ohio, where the locomotive spent its final days of revenue service before it was retired in 1959.[10] Simultaneously, all the other Y3a's and Y3's were also removed from service, as the N&W began dieselizing their roster.[3]

Armco Steel and Illinois Railway Museum ownership

edit

By the end of 1959, No. 2050 was among several Mallet locomotives the N&W sold for scrap to the Armco Steel Corporation in Middletown, Ohio.[9][10] While most of the other N&W mallets were dismantled, No. 2050 was one of three such locomotives that Armco chose at random to be used as portable stationary boilers around their plant.[10][11] They were equipped with a 6-inch (15 cm) line on their steam dome, but they were only used as stationary boilers twice before they were left in outdoor storage.[10]

Sometime in the mid-1960s, the other two remaining mallets were scrapped, while No. 2050 was retained as an emergency back-up boiler, but it was never used as such again.[9][11] As time progressed, some Armco employees had become fond of the No. 2050 locomotive; one of them chalked a poem on the side of its tender, which subsequently became featured in Trains magazine.[10][12]

My engine now is cold and still.
No water does my boiler fill.
My coal affords its flame no more.
My days of usefulness are o’er.
My wheels denied their wanted speed.
No more thy guiding hand they need.
My whistle too has lost its tone.
Its shrill and thrilling sounds are gone.
My valves are now thrown open wide.
My flanges all refuse to guide.
My steam is now condensed, in death.

— The poem an anonymous Armco employee wrote on N&W No. 2050's tender, [10]

In 1973, the Illinois Railway Museum (IRM) of Union, Illinois became aware of No. 2050's deteriorating status and solicited for it to be donated to them, but Armco—believing the museum wanted to receive the locomotive in good mechanical condition—asked the IRM to pay $37,500, consequently ending the negotiations.[10] Two other museums, including the Roanoke Transportation Museum, also tried to obtain No. 2050 as a donation, but to no avail.[10][11] In the spring of 1975, one Armco employee, Neil Easter, visited the IRM along with his wife and sons while returning home from a vacation, and upon learning the IRM's interest in No. 2050 from IRM member J. David Conrad, Neil promised to help arrange a donation.[10]

Neil Easter informed Armco management that the IRM was able to perform some required mechanical work on No. 2050 and paying for the shipping costs themselves, and Armco agreed to donate the locomotive to the museum.[9][10][13] In September 1975, the IRM authorized a team of mechanics—led by Dave Conrad—to repair No. 2050 to ensure the locomotive would be safely shipped on its wheels, but work did not begin until January 1976, when the IRM formally contracted with Armco to remove the Y3a from their property.[10][14] No. 2050 was found to be in poor condition, and the crews had to thoroughly clean and lubricate the axles to make the locomotive roll, with Penn Central (PC) having to inspect it twice for eligibility to be moved on their mainline.[9][10]

Per request of PC, several additional tasks were made to ready No. 2050; old coal was unloaded from the tender; the tender brake cylinder and the footboards were replaced with duplicates; the locked brake rigging was oiled and loosened; and part of the locomotive was jacked up to repair a broken driving wheel spring.[10] On April 19, No. 2050 was towed out of the Armco property and towed in a special consist via Conrail—PC's successor.[10] Upon arrival in Chicago, No. 2050 was transferred to a Chicago and North Western (C&NW) fast freight consist, which towed it to the IRM interchange, and then two of the museum's diesels towed it onto one of the IRM's sidings.[10] Following its arrival at the IRM, No. 2050 underwent a cosmetic restoration led by Jim Kehrein.[10][14]

Today, 2050 resides inside one of the buildings at the Illinois Railway Museum.

See also

edit

References

edit
  1. ^ a b c d e Dixon, Parker & Huddleston (2009), p. 45
  2. ^ a b c Dixon, Parker & Huddleston (2009), p. 46
  3. ^ a b c Dixon, Parker & Huddleston (2009), p. 59
  4. ^ "Norfolk & Western 2050". Illinois Railway Museum. Retrieved 2023-10-19.
  5. ^ a b c Dixon, Parker & Huddleston (2009), p. 48
  6. ^ Dixon, Parker & Huddleston (2009), p. 35
  7. ^ Dixon, Parker & Huddleston (2009), p. 47
  8. ^ a b Young (2013), p. 18
  9. ^ a b c d e "Rail Museum Gift Lacks 'Horsepower'". Springfield News-Sun. Vol. 48, no. 39. February 1, 1976. p. 40. Retrieved October 26, 2024 – via Newspapers.com.
  10. ^ a b c d e f g h i j k l m n o p q Brown, Scott (August 3, 1978). "The 2050 at home in "a place made of dreams"". The Marengo Beacon News. Vol. 7, no. 27. pp. 5253. Retrieved October 26, 2024 – via Newspapers.com.
  11. ^ a b c "Steam News Photos". Trains. Vol. 31, no. 6. Kalmbach Publishing. April 1971. p. 17. Retrieved June 27, 2024.
  12. ^ "The romance of the rails—alive and well in Union". Chicago Tribune. Vol. 130, no. 237. August 24, 1976. p. 49. Retrieved October 26, 2024 – via Newspapers.com.
  13. ^ Young (2013), p. 172
  14. ^ a b Huddleston (2002), p. 86

Bibliography

edit

Further reading

edit
  • Jeffries, Lewis (1980). N&W: Giant of Steam (1st ed.). Pruett Publishing. ISBN 0-87108-547-X.
  • King, Ed (1998). Norfolk & Western in the Appalachians: From the Blue Ridge to the Big Sandy. The Golden Year of Railroading (1st ed.). Kalmbach Publishing. ISBN 0-89024-316-6.
  • Nichols, Jim (1997). Norfolk & Western in Color Volume 1: 1954-1964 (1st ed.). Scotch Plains, New Jersey: Morning Sun Books, Inc. ISBN 1-878887-72-6.
  • Isaacs, Aaron (2021). Illinois Railway Museum in Color. Scotch Plains, New Jersey: Morning Sun Books, Inc. ISBN 978-1582487564.