Oxamide

Oxamide
Oxamide	Oxamide
Names
	Preferred IUPAC name Oxamide
	Systematic IUPAC name Ethanediamide
	Other names Oxalamide; Oxamimidic acid; Diaminoglyoxal; Oxalic acid diamide; 1-Carbamoyl-formimidic acid;
Identifiers
CAS Number	471-46-5 ;
3D model (JSmol)	Interactive image;
ChEBI	CHEBI:48248 ;
ChemSpider	9709 ;
ECHA InfoCard	100.006.767
EC Number	207-442-5;
PubChem CID	10113;
UNII	SBE4M0223E ;
CompTox Dashboard (EPA)	DTXSID1060051 ;
	InChI InChI=1S/C2H4N2O2/c3-1(5)2(4)6/h(H2,3,5)(H2,4,6) Key: YIKSCQDJHCMVMK-UHFFFAOYSA-N ; InChI=1/C2H4N2O2/c3-1(5)2(4)6/h(H2,3,5)(H2,4,6) Key: YIKSCQDJHCMVMK-UHFFFAOYAL;
	SMILES NC(=O)C(N)=O;
Properties
Chemical formula	(CONH2)2
Molar mass	88.0654 g/mol
Appearance	White powder
Density	1.667 g/cm3
Melting point	122 °C (252 °F; 395 K)
Boiling point	324 °C (615 °F; 597 K) , decomposes above 350 °C
Solubility in water	Slightly soluble
Solubility	Soluble in ethanol, insoluble in diethyl ether
Magnetic susceptibility (χ)	−39.0·10−6 cm3/mol
Hazards
Flash point	> 300 °C (572 °F; 573 K)
	Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa). verify (what is ?) Infobox references

Oxamide is the organic compound with the formula (CONH₂)₂. This white crystalline solid is soluble in ethanol, slightly soluble in water and insoluble in diethyl ether. Oxamide is the diamide derived from oxalic acid, and the hydrate of cyanogen.

Preparation

Oxamide is produced from hydrogen cyanide, which is oxidized to cyanogen, which is then hydrolyzed.^[5]

It can also be prepared from formamide by glow-discharge electrolysis.^[6]

Application

The main application is as a substitute for urea in fertilizers. Oxamide hydrolyzes (releases ammonia) very slowly, which is sometimes preferred vs the quick release by urea.

It is used as a stabilizer for nitrocellulose preparations. It also finds use in APCP rocket motors as a high performance burn rate suppressant. The use of oxamide in concentrations of 1-3 wt% has shown to slow the linear burn rate while having minimal impact on propellant specific impulse.

N,N'-substituted oxamides are supporting ligands for the copper-catalyzed amination and amidation of aryl halides in (Ullmann-Goldberg reaction), including relatively unreactive aryl chloride substrates.^[7]

Reactions

It dehydrates above 350 °C releasing cyanogen. Oxamide derivatives form self-assembled monolayers consisting of a hydrogen bonded network.^[8]

References

^ Nomenclature of Organic Chemistry : IUPAC Recommendations and Preferred Names 2013 (Blue Book). Cambridge: The Royal Society of Chemistry. 2014. p. 841. doi:10.1039/9781849733069-FP001. ISBN 978-0-85404-182-4.
^ "Oxamide | C2H4N2O2 | ChemSpider".
^ "Oxamide | C2H4N2O2 | ChemSpider".
^ GHS: Sigma-Aldrich 75770^{[dead link]}
^ Riemenschneider, Wilhelm; Tanifuji, Minoru (2002). "Oxalic Acid". Ullmann's Encyclopedia of Industrial Chemistry. Weinheim: Wiley-VCH. doi:10.1002/14356007.a18_247. ISBN 978-3527306732..
^ Brown, E. H.; Wilhide, W. D.; Elmore, K. L. (1962). "A New Method for the Preparation of Oxamide". The Journal of Organic Chemistry. 27 (10): 3698. doi:10.1021/jo01057a516.
^ Zhou, Wei; Fan, Mengyang; Yin, Junli; Jiang, Yongwen; Ma, Dawei (2015-09-23). "CuI/Oxalic Diamide Catalyzed Coupling Reaction of (Hetero)Aryl Chlorides and Amines". Journal of the American Chemical Society. 137 (37): 11942–11945. doi:10.1021/jacs.5b08411. ISSN 0002-7863. PMID 26352639.
^ Nguyen T.L., Fowler F.W., Lauher J.W., "Commensurate and incommensurate hydrogen bonds. An exercise in crystal engineering." Journal of the American Chemical Society, 123(44), pp. 11057-64, 2001. doi:10.1021/ja016635v

[iupac2013-1] Nomenclature of Organic Chemistry : IUPAC Recommendations and Preferred Names 2013 (Blue Book). Cambridge: The Royal Society of Chemistry. 2014. p. 841. doi:10.1039/9781849733069-FP001. ISBN 978-0-85404-182-4.

[2] "Oxamide | C2H4N2O2 | ChemSpider".

[3] "Oxamide | C2H4N2O2 | ChemSpider".

[4] GHS: Sigma-Aldrich 75770^{[dead link]}

[Ullmann-5] Riemenschneider, Wilhelm; Tanifuji, Minoru (2002). "Oxalic Acid". Ullmann's Encyclopedia of Industrial Chemistry. Weinheim: Wiley-VCH. doi:10.1002/14356007.a18_247. ISBN 978-3527306732..

[6] Brown, E. H.; Wilhide, W. D.; Elmore, K. L. (1962). "A New Method for the Preparation of Oxamide". The Journal of Organic Chemistry. 27 (10): 3698. doi:10.1021/jo01057a516.

[7] Zhou, Wei; Fan, Mengyang; Yin, Junli; Jiang, Yongwen; Ma, Dawei (2015-09-23). "CuI/Oxalic Diamide Catalyzed Coupling Reaction of (Hetero)Aryl Chlorides and Amines". Journal of the American Chemical Society. 137 (37): 11942–11945. doi:10.1021/jacs.5b08411. ISSN 0002-7863. PMID 26352639.

[8] Nguyen T.L., Fowler F.W., Lauher J.W., "Commensurate and incommensurate hydrogen bonds. An exercise in crystal engineering." Journal of the American Chemical Society, 123(44), pp. 11057-64, 2001. doi:10.1021/ja016635v

[1]

[3]

[2]

[5]

[6]

[7]

[8]