Wikipedia

Protactinium

(Redirected from Pa (element))

Protactinium is a chemical element; it has symbol Pa and atomic number 91. It is a dense, radioactive, silvery-gray actinide metal which readily reacts with oxygen, water vapor, and inorganic acids. It forms various chemical compounds, in which protactinium is usually present in the oxidation state +5, but it can also assume +4 and even +3 or +2 states. Concentrations of protactinium in the Earth's crust are typically a few parts per trillion, but may reach up to a few parts per million in some uraninite ore deposits. Because of its scarcity, high radioactivity, and high toxicity, there are currently no uses for protactinium outside scientific research, and for this purpose, protactinium is mostly extracted from spent nuclear fuel.

Protactinium, 91Pa
Microscope image of a sample of protactinium-233
Protactinium
Pronunciation/ˌproʊtækˈtɪniəm/ ​(PROH-tak-TIN-ee-əm)
Appearancebright, silvery metallic luster
Standard atomic weight Ar°(Pa)
Protactinium in the periodic table
Hydrogen Helium
Lithium Beryllium Boron Carbon Nitrogen Oxygen Fluorine Neon
Sodium Magnesium Aluminium Silicon Phosphorus Sulfur Chlorine Argon
Potassium Calcium Scandium Titanium Vanadium Chromium Manganese Iron Cobalt Nickel Copper Zinc Gallium Germanium Arsenic Selenium Bromine Krypton
Rubidium Strontium Yttrium Zirconium Niobium Molybdenum Technetium Ruthenium Rhodium Palladium Silver Cadmium Indium Tin Antimony Tellurium Iodine Xenon
Caesium Barium Lanthanum Cerium Praseodymium Neodymium Promethium Samarium Europium Gadolinium Terbium Dysprosium Holmium Erbium Thulium Ytterbium Lutetium Hafnium Tantalum Tungsten Rhenium Osmium Iridium Platinum Gold Mercury (element) Thallium Lead Bismuth Polonium Astatine Radon
Francium Radium Actinium Thorium Protactinium Uranium Neptunium Plutonium Americium Curium Berkelium Californium Einsteinium Fermium Mendelevium Nobelium Lawrencium Rutherfordium Dubnium Seaborgium Bohrium Hassium Meitnerium Darmstadtium Roentgenium Copernicium Nihonium Flerovium Moscovium Livermorium Tennessine Oganesson
Pr
↑
Pa
↓
—
thorium ← protactinium → uranium
Atomic number (Z)91
Groupf-block groups (no number)
Periodperiod 7
Block  f-block
Electron configuration[Rn] 5f2 6d1 7s2
Electrons per shell2, 8, 18, 32, 20, 9, 2
Physical properties
Phase at STPsolid
Melting point1841 K ​(1568 °C, ​2854 °F)
Boiling point4300 K ​(4027 °C, ​7280 °F) (?)
Density (at 20° C)15.43 g/cm3 [3]
Heat of fusion12.34 kJ/mol
Heat of vaporization481 kJ/mol
Atomic properties
Oxidation statescommon: +5
+2,? +3,[4] +4[4]
ElectronegativityPauling scale: 1.5
Ionization energies
  • 1st: 568 kJ/mol
Atomic radiusempirical: 163 pm
Covalent radius200 pm
Color lines in a spectral range
Spectral lines of protactinium
Other properties
Natural occurrencefrom decay
Crystal structure ​body-centered tetragonal[5] (tI2)
Lattice constant
Body-centered tetragonal crystal structure for protactinium
a = 392.1 pm
c = 323.5 pm (at 20 °C)[3]
Thermal expansion11.8×10−6/K (at 20 °C)[3]
Thermal conductivity47 W/(m⋅K)
Electrical resistivity177 nΩ⋅m (at 0 °C)
Magnetic orderingparamagnetic[6]
CAS Number7440-13-3
History
PredictionDmitri Mendeleev (1869)
Discovery and first isolationKasimir Fajans and Oswald Helmuth Göhring (1913)
Named byOtto Hahn and Lise Meitner (1917–8)
Isotopes of protactinium
Main isotopes[7] Decay
abun­dance half-life (t1/2) mode pro­duct
229Pa synth 1.5 d ε 229Th
230Pa synth 17.4 d β+ 230Th
β− 230U
α 226Ac
231Pa 100% 3.265×104 y α 227Ac
232Pa synth 1.32 d β− 232U
233Pa trace 26.975 d β− 233U
234Pa trace 6.70 h β− 234U
234mPa trace 1.159 min β− 234U
 Category: Protactinium
| references

The element was first identified in 1913 by Kazimierz Fajans and Oswald Helmuth Göhring and named "brevium" because of the short half-life of the specific isotope studied, protactinium-234m. A more stable isotope of protactinium, 231Pa, was discovered in 1917/18 by Lise Meitner in collaboration with Otto Hahn, and they named the element protactinium.[8] In 1949, the IUPAC chose the name "protactinium" and confirmed Hahn and Meitner as its discoverers. The new name meant "(nuclear) precursor of actinium,"[9] suggesting that actinium is a product of radioactive decay of protactinium. John Arnold Cranston (working with Frederick Soddy and Ada Hitchins) is also credited with discovering the most stable isotope in 1915, but he delayed his announcement due to being called for service in the First World War.[10]

The longest-lived and most abundant (nearly 100%) naturally occurring isotope of protactinium, protactinium-231, has a half-life of 32,760 years and is a decay product of uranium-235. Much smaller trace amounts of the short-lived protactinium-234 and its nuclear isomer protactinium-234m occur in the decay chain of uranium-238. Protactinium-233 occurs as a result of the decay of thorium-233 as part of the chain of events necessary to produce uranium-233 by neutron irradiation of thorium-232. It is an undesired intermediate product in thorium-based nuclear reactors, and is therefore removed from the active zone of the reactor during the breeding process. Ocean science utilizes the element to understand the ancient ocean's geography. Analysis of the relative concentrations of various uranium, thorium, and protactinium isotopes in water and minerals is used in radiometric dating of sediments up to 175,000 years old, and in modeling of various geological processes.[11]

History

edit
 
Dmitri Mendeleev's 1871 periodic table with a gap for protactinium on the bottom row of the chart, between thorium and uranium

In 1871, Dmitri Mendeleev predicted the existence of an element between thorium and uranium.[12] The actinide series was unknown at the time, so Mendeleev positioned uranium below tungsten in group VI, and thorium below zirconium in group IV, leaving the space below tantalum in group V empty. Until the general acceptance of the actinide concept in the late 1940s, periodic tables were published with this structure.[13] For a long time, chemists searched for eka-tantalum[note 1] as an element with similar chemical properties to tantalum, making a discovery of protactinium nearly impossible. Tantalum's heavier analogue was later found to be the transuranic element dubnium – although dubnium is more chemically similar to protactinium, not tantalum.[14]

In 1900, William Crookes isolated protactinium as an intensely radioactive material from uranium; however, he could not characterize it as a new chemical element and thus named it uranium X (UX).[12][15][16] Crookes dissolved uranium nitrate in ether, and the residual aqueous phase contained most of the 234
90Th
 and 234
91Pa
. His method was used into the 1950s to isolate 234
90Th
 and 234
91Pa
 from uranium compounds.[17] Protactinium was first identified in 1913, when Kasimir Fajans and Oswald Helmuth Göhring encountered the isotope 234mPa during their studies of the decay chains of uranium-238: 238
92U
 → 234
90Th
 → 234m
91Pa
 → 234
92U
. They named the new element "brevium" (from the Latin word brevis, meaning brief or short) because of the short half-life of 1.16 minutes for 234m
91Pa
 (uranium X2).[18][19][20][21][22][23] In 1917–18, two groups of scientists, Lise Meitner in collaboration with Otto Hahn of Germany and Frederick Soddy and John Cranston of Great Britain, independently discovered another isotope, 231Pa, having a much longer half-life of 32,760 years.[8][22][24] Meitner changed the name "brevium" to protactinium as the new element was part of the decay chain of uranium-235 as the parent of actinium (from the Greek: πρῶτος prôtos, meaning "first, before").[25] The IUPAC confirmed this naming in 1949.[26][27] The discovery of protactinium completed one of the last gaps in early versions of the periodic table, and brought fame to the involved scientists.[28]

Aristid von Grosse produced 2 milligrams of Pa2O5 in 1927,[29] and in 1934 first isolated elemental protactinium from 0.1 milligrams of Pa2O5.[30] He used two different procedures: in the first, protactinium oxide was irradiated by 35 keV electrons in vacuum. In the other, called the van Arkel–de Boer process, the oxide was chemically converted to a halide (chloride, bromide or iodide) and then reduced in a vacuum with an electrically heated metallic filament:[26][31]

2 PaI5 → 2 Pa + 5 I2

In 1961, the United Kingdom Atomic Energy Authority (UKAEA) produced 127 grams of 99.9% pure protactinium-231 by processing 60 tonnes of waste material in a 12-stage process, at a cost of about US$500,000.[26][32] For many years, this was the world's only significant supply of protactinium, which was provided to various laboratories for scientific studies.[12] The Oak Ridge National Laboratory in the US provided protactinium at a cost of about US$280/gram.[33]

Isotopes

edit
Main article: Isotopes of protactinium

Twenty-nine radioisotopes of protactinium have been discovered. The most stable are 231Pa with a half-life of 32,760 years, 233Pa with a half-life of 27 days, and 230Pa with a half-life of 17.4 days. All other isotopes have half-lives shorter than 1.6 days, and the majority of these have half-lives less than 1.8 seconds. Protactinium also has two nuclear isomers, 217mPa (half-life 1.2 milliseconds) and 234mPa (half-life 1.16 minutes).[34]

The primary decay mode for the most stable isotope 231Pa and lighter (211Pa to 231Pa) is alpha decay, producing isotopes of actinium. The primary mode for the heavier isotopes (232Pa to 239Pa) is beta decay, producing isotopes of uranium.[34]

Nuclear fission

edit

The longest-lived and most abundant isotope, 231Pa, can fission from fast neutrons exceeding ~1 MeV.[35] 233Pa, the other isotope of protactinium produced in nuclear reactors, also has a fission threshold of 1 MeV.[36]

Occurrence

edit

Protactinium is one of the rarest and most expensive naturally occurring elements. It is found in the form of two isotopes – 231Pa and 234Pa, with the isotope 234Pa occurring in two different energy states. Nearly all natural protactinium is protactinium-231. It is an alpha emitter and is formed by the decay of uranium-235, whereas the beta radiating protactinium-234 is produced as a result of uranium-238 decay. Nearly all uranium-238 (99.8%) decays first to the shorter-lived 234mPa isomer.[37]

Protactinium occurs in uraninite (pitchblende) at concentrations of about 0.3-3 parts 231Pa per million parts (ppm) of ore.[12] Whereas the usual content is closer to 0.3 ppm[38] (e.g. in Jáchymov, Czech Republic[39]), some ores from the Democratic Republic of the Congo have about 3 ppm.[26] Protactinium is homogeneously dispersed in most natural materials and in water, but at much lower concentrations on the order of one part per trillion, corresponding to a radioactivity of 0.1 picocuries (pCi)/g. There is about 500 times more protactinium in sandy soil particles than in water, even when compared to water present in the same sample of soil. Much higher ratios of 2,000 and above are measured in loam soils and clays, such as bentonite.[37][40]

In nuclear reactors

edit

Two major protactinium isotopes, 231Pa and 233Pa, are produced from thorium in nuclear reactors; both are undesirable and are usually removed, thereby adding complexity to the reactor design and operation. In particular, 232Th, via (n, 2n) reactions, produces 231Th, which quickly decays to 231Pa (half-life 25.5 hours). The last isotope, while not a transuranic waste, has a long half-life of 32,760 years, and is a major contributor to the long-term radiotoxicity of spent nuclear fuel.[41]

Protactinium-233 is formed upon neutron capture by 232Th. It either further decays to uranium-233, or captures another neutron and converts into the non-fissile uranium-234.[42] 233Pa has a relatively long half-life of 27 days and high cross section for neutron capture (the so-called "neutron poison"). Thus, instead of rapidly decaying to the useful 233U, a significant fraction of 233Pa converts to non-fissile isotopes and consumes neutrons, degrading reactor efficiency. To limit the loss of neutrons, 233Pa is extracted from the active zone of thorium molten salt reactors during their operation, so that it can only decay into 233U. Extraction of 233Pa is achieved using columns of molten bismuth with lithium dissolved in it. In short, lithium selectively reduces protactinium salts to protactinium metal, which is then extracted from the molten-salt cycle, while the molten bismuth is merely a carrier, selected due to its low melting point of 271 °C, low vapor pressure, good solubility for lithium and actinides, and immiscibility with molten halides.[41]

Preparation

edit
 
Protactinium occurs in uraninite ores.

Before the advent of nuclear reactors, protactinium was separated for scientific experiments from uranium ores. Since reactors have become more common, it is mostly produced as an intermediate product of nuclear fission in thorium fuel cycle reactors as an intermediate in the production of the fissile uranium-233:

 

The isotope 231Pa can be prepared by irradiating thorium-230 with slow neutrons, converting it to the beta-decaying thorium-231; or, by irradiating thorium-232 with fast neutrons, generating thorium-231 and 2 neutrons.

Protactinium metal can be prepared by reduction of its fluoride with calcium,[43] lithium, or barium at a temperature of 1300–1400 °C.[44][45]

Properties

edit

Protactinium is an actinide positioned in the periodic table to the left of uranium and to the right of thorium, and many of its physical properties are intermediate between its neighboring actinides. Protactinium is denser and more rigid than thorium, but is lighter than uranium; its melting point is lower than that of thorium, but higher than that of uranium. The thermal expansion, electrical, and thermal conductivities of these three elements are comparable and are typical of post-transition metals. The estimated shear modulus of protactinium is similar to that of titanium.[46] Protactinium is a metal with silvery-gray luster that is preserved for some time in air.[26][32] Protactinium easily reacts with oxygen, water vapor, and acids, but not with alkalis.[12]

At room temperature, protactinium crystallizes in the body-centered tetragonal structure, which can be regarded as distorted body-centered cubic lattice; this structure does not change upon compression up to 53 GPa. The structure changes to face-centered cubic (fcc) upon cooling from high temperature, at about 1200 °C.[43][47] The thermal expansion coefficient of the tetragonal phase between room temperature and 700 °C is 9.9×10−6/°C.[43]

Protactinium is paramagnetic and no magnetic transitions are known for it at any temperature.[48] It becomes superconductive at temperatures below 1.4 K.[12][44] Protactinium tetrachloride is paramagnetic at room temperature, but becomes ferromagnetic when cooled to 182 K.[49]

Protactinium exists in two major oxidation states: +4 and +5, both in solids and solutions; and the +3 and +2 states, which have been observed in some solids. As the electron configuration of the neutral atom is [Rn]5f26d17s2, the +5 oxidation state corresponds to the low-energy (and thus favored) 5f0 configuration. Both +4 and +5 states easily form hydroxides in water, with the predominant ions being Pa(OH)3+, Pa(OH)2+2, Pa(OH)+3, and Pa(OH)4, all of which are colorless.[50] Other known protactinium ions include PaCl2+2, PaSO2+4, PaF3+, PaF2+2, PaF−6, PaF2−7, and PaF3−8.[51][52]

Chemical compounds

edit
Main article: Protactinium compounds
Formula color symmetry space group No Pearson symbol a (pm) b (pm) c (pm) Z density (g/cm3)
Pa silvery-gray tetragonal[5] I4/mmm 139 tI2 392.5 392.5 323.8 2 15.37
PaO rocksalt[45] Fm3m 225 cF8 496.1 4 13.44
PaO2 black fcc[45] Fm3m 225 cF12 550.5 4 10.47
Pa2O5 white Fm3m[45] 225 cF16 547.6 547.6 547.6 4 10.96
Pa2O5 white orthorhombic[45] 692 402 418
PaH3 black cubic[45] Pm3n 223 cP32 664.8 664.8 664.8 8 10.58
PaF4 brown-red monoclinic[45] C2/c 15 mS60 2
PaCl4 green-yellow tetragonal[53] I41/amd 141 tI20 837.7 837.7 748.1 4 4.72
PaBr4 brown tetragonal[54][55] I41/amd 141 tI20 882.4 882.4 795.7
PaCl5 yellow monoclinic[56] C2/c 15 mS24 797 1135 836 4 3.74
PaBr5 red monoclinic[55][57] P21/c 14 mP24 838.5 1120.5 1214.6 4 4.98
PaOBr3 monoclinic[55] C2 1691.1 387.1 933.4
Pa(PO3)4 orthorhombic[58] 696.9 895.9 1500.9
Pa2P2O7 cubic[58] Pa3 865 865 865
Pa(C8H8)2 golden-yellow monoclinic[59] 709 875 1062

Here, a, b, and c are lattice constants in picometers, No is the space group number, and Z is the number of formula units per unit cell; fcc stands for the face-centered cubic symmetry. Density was not measured directly but calculated from the lattice parameters.

Oxides and oxygen-containing salts

edit

Protactinium oxides are known for the metal oxidation states +2, +4, and +5. The most stable is the white pentoxide Pa2O5, which can be produced by igniting protactinium(V) hydroxide in air at a temperature of 500 °C.[60] Its crystal structure is cubic, and the chemical composition is often non-stoichiometric, described as PaO2.25. Another phase of this oxide with orthorhombic symmetry has also been reported.[45][61] The black dioxide PaO2 is obtained from the pentoxide by reducing it at 1550 °C with hydrogen. It is not readily soluble in either dilute or concentrated nitric, hydrochloric, or sulfuric acid, but easily dissolves in hydrofluoric acid.[45] The dioxide can be converted back to pentoxide by heating in oxygen-containing atmosphere to 1100 °C.[61] The monoxide PaO has only been observed as a thin coating on protactinium metal, but not in an isolated bulk form.[45]

Protactinium forms mixed binary oxides with various metals. With alkali metals A, the crystals have a chemical formula APaO3 and perovskite structure; A3PaO4 and distorted rock-salt structure; or A7PaO6, where oxygen atoms form a hexagonal close-packed lattice. In all of these materials, the protactinium ions are octahedrally coordinated.[62][63] The pentoxide Pa2O5 combines with rare-earth metal oxides R2O3 to form various nonstoichiometric mixed-oxides, also of perovskite structure.[64]

Protactinium oxides are basic; they easily convert to hydroxides and can form various salts, such as sulfates, phosphates, nitrates, etc. The nitrate is usually white but can be brown due to radiolytic decomposition. Heating the nitrate in air at 400 °C converts it to the white protactinium pentoxide.[65] The polytrioxophosphate Pa(PO3)4 can be produced by reacting the difluoride sulfate PaF2SO4 with phosphoric acid (H3PO4) under an inert atmosphere. Heating the product to about 900 °C eliminates the reaction by-products, which include hydrofluoric acid, sulfur trioxide, and phosphoric anhydride. Heating it to higher temperatures in an inert atmosphere decomposes Pa(PO3)4 into the diphosphate PaP2O7, which is analogous to diphosphates of other actinides. In the diphosphate, the PO3 groups form pyramids of C2v symmetry. Heating PaP2O7 in air to 1400 °C decomposes it into the pentoxides of phosphorus and protactinium.[58]

Halides

edit

Protactinium(V) fluoride forms white crystals where protactinium ions are arranged in pentagonal bipyramids and coordinated by 7 other ions. The coordination is the same in protactinium(V) chloride, but the color is yellow. The coordination changes to octahedral in the brown protactinium(V) bromide, but is unknown for protactinium(V) iodide. The protactinium coordination in all its tetrahalides is 8, but the arrangement is square antiprismatic in protactinium(IV) fluoride and dodecahedral in the chloride and bromide. Brown-colored protactinium(III) iodide has been reported, where protactinium ions are 8-coordinated in a bicapped trigonal prismatic arrangement.[66]

 
Coordination of protactinium (solid circles) and halogen atoms (open circles) in protactinium(V) fluoride or chloride.

Protactinium(V) fluoride and protactinium(V) chloride have a polymeric structure of monoclinic symmetry. There, within one polymeric chain, all halide atoms lie in one graphite-like plane and form planar pentagons around the protactinium ions. The 7-coordination of protactinium originates from the five halide atoms and two bonds to protactinium atoms belonging to the nearby chains. These compounds easily hydrolyze in water.[67] The pentachloride melts at 300 °C and sublimates at even lower temperatures.

Protactinium(V) fluoride can be prepared by reacting protactinium oxide with either bromine pentafluoride or bromine trifluoride at about 600 °C, and protactinium(IV) fluoride is obtained from the oxide and a mixture of hydrogen and hydrogen fluoride at 600 °C; a large excess of hydrogen is required to remove atmospheric oxygen leaks into the reaction.[45]

Protactinium(V) chloride is prepared by reacting protactinium oxide with carbon tetrachloride at temperatures of 200–300 °C.[45] The by-products (such as PaOCl3) are removed by fractional sublimation.[56] Reduction of protactinium(V) chloride with hydrogen at about 800 °C yields protactinium(IV) chloride – a yellow-green solid that sublimes in vacuum at 400 °C. It can also be obtained directly from protactinium dioxide by treating it with carbon tetrachloride at 400 °C.[45]

Protactinium bromides are produced by the action of aluminium bromide, hydrogen bromide, carbon tetrabromide, or a mixture of hydrogen bromide and thionyl bromide on protactinium oxide. They can alternatively be produced by reacting protactinium pentachloride with hydrogen bromide or thionyl bromide.[45] Protactinium(V) bromide has two similar monoclinic forms: one is obtained by sublimation at 400–410 °C, and another by sublimation at a slightly lower temperature of 390–400 °C.[55][57]

Protactinium iodides can be produced by reacting protactinium metal with elemental iodine at 600 °C, and by reacting Pa2O5 with AlO3 at 600 °C.[45] Protactinium(III) iodide can be obtained by heating protactinium(V) iodide in vacuum.[67] As with oxides, protactinium forms mixed halides with alkali metals. The most remarkable among these is Na3PaF8, where the protactinium ion is symmetrically surrounded by 8 F− ions, forming a nearly perfect cube.[51]

More complex protactinium fluorides are also known, such as Pa2F9[67] and ternary fluorides of the types MPaF6 (M = Li, Na, K, Rb, Cs or NH4), M2PaF7 (M = K, Rb, Cs or NH4), and M3PaF8 (M = Li, Na, Rb, Cs), all of which are white crystalline solids. The MPaF6 formula can be represented as a combination of MF and PaF5. These compounds can be obtained by evaporating a hydrofluoric acid solution containing both complexes. For the small alkali cations like Na, the crystal structure is tetragonal, whereas it becomes orthorhombic for larger cations K+, Rb+, Cs+ or NH4+. A similar variation was observed for the M2PaF7 fluorides: namely, the crystal symmetry was dependent on the cation and differed for Cs2PaF7 and M2PaF7 (M = K, Rb or NH4).[52]

Other inorganic compounds

edit

Oxyhalides and oxysulfides of protactinium are known. PaOBr3 has a monoclinic structure composed of double-chain units where protactinium has coordination 7 and is arranged into pentagonal bipyramids. The chains are interconnected through oxygen and bromine atoms, and each oxygen atom is related to three protactinium atoms.[55] PaOS is a light-yellow, non-volatile solid with a cubic crystal lattice isostructural to that of other actinide oxysulfides. It is obtained by reacting protactinium(V) chloride with a mixture of hydrogen sulfide and carbon disulfide at 900 °C.[45]

In hydrides and nitrides, protactinium has a low oxidation state of about +3. The hydride is obtained by direct action of hydrogen on the metal at 250 °C, and the nitride is a product of ammonia and protactinium tetrachloride or pentachloride. This bright yellow solid is thermally stable to 800 °C in vacuum. Protactinium carbide (PaC) is formed by the reduction of protactinium tetrafluoride with barium in a carbon crucible at a temperature of about 1400 °C.[45] Protactinium forms borohydrides, which include Pa(BH4)4. It has an unusual polymeric structure with helical chains, where the protactinium atom has coordination number of 12 and is surrounded by six BH4− ions.[68]

Organometallic compounds

edit
 
The proposed structure of the protactinocene (Pa(C8H8)2) molecule

Protactinium(IV) forms a tetrahedral complex tetrakis(cyclopentadienyl)protactinium(IV) (or Pa(C5H5)4) with four cyclopentadienyl rings, which can be synthesized by reacting protactinium(IV) chloride with molten Be(C5H5)2. One ring can be substituted with a halide atom.[69] Another organometallic complex is the golden-yellow bis(π-cyclooctatetraene) protactinium, or protactinocene (Pa(C8H8)2), which is analogous in structure to uranocene. There, the metal atom is sandwiched between two cyclooctatetraene ligands. Similar to uranocene, it can be prepared by reacting protactinium tetrachloride with dipotassium cyclooctatetraenide (K2C8H8) in tetrahydrofuran.[59]

Applications

edit

Although protactinium is situated in the periodic table between uranium and thorium, both of which have numerous applications, there are currently no uses for protactinium outside scientific research owing to its scarcity, high radioactivity, and high toxicity.[37]

Protactinium-231 arises naturally from the decay of natural uranium-235, and artificially in nuclear reactors by the reaction 232Th + n → 231Th + 2n and the subsequent beta decay of 231Th. It was once thought to be able to support a nuclear chain reaction, which could in principle be used to build nuclear weapons; the physicist Walter Seifritz [de] once estimated the associated critical mass as 750±180 kg.[70] However, the possibility of criticality of 231Pa has since been ruled out.[35][71]

With the advent of highly sensitive mass spectrometers, an application of 231Pa as a tracer in geology and paleoceanography has become possible. In this application, the ratio of protactinium-231 to thorium-230 is used for radiometric dating of sediments which are up to 175,000 years old, and in modeling of the formation of minerals.[38] In particular, its evaluation in oceanic sediments helped to reconstruct the movements of North Atlantic water bodies during the last melting of Ice Age glaciers.[72] Some of the protactinium-related dating variations rely on analysis of the relative concentrations of several long-living members of the uranium decay chain – uranium, protactinium, and thorium, for example. These elements have 6, 5, and 4 valence electrons, thus favoring +6, +5, and +4 oxidation states respectively, and display different physical and chemical properties. Thorium and protactinium, but not uranium compounds, are poorly soluble in aqueous solutions and precipitate into sediments; the precipitation rate is faster for thorium than for protactinium. The concentration analysis for both protactinium-231 (half-life 32,760 years) and thorium-230 (half-life 75,380 years) improves measurement accuracy compared to when only one isotope is measured; this double-isotope method is also weakly sensitive to inhomogeneities in the spatial distribution of the isotopes and to variations in their precipitation rate.[38][73]

Precautions

edit

Protactinium is both toxic and highly radioactive; thus, it is handled exclusively in a sealed glove box. Its major isotope 231Pa has a specific activity of 0.048 curies (1.8 GBq) per gram and primarily emits alpha-particles with an energy of 5 MeV, which can be stopped by a thin layer of any material. However, it slowly decays, with a half-life of 32,760 years, into 227Ac, which has a specific activity of 74 curies (2,700 GBq) per gram, emits both alpha and beta radiation, and has a much shorter half-life of 22 years. 227Ac, in turn, decays into lighter isotopes with even shorter half-lives and much greater specific activities (SA).[37]

Isotope 231Pa 227Ac 227Th 223Ra 219Rn 215Po 211Pb 211Bi 207Tl
SA (Ci/g) 0.048 73 3.1×104 5.2×104 1.3×1010 3×1013 2.5×107 4.2×108 1.9×108
Decay α α, β α α α α β α, β β
Half-life 33 ka 22 a 19 days 11 days 4 s 1.8 ms 36 min 2.1 min 4.8 min

As protactinium is present in small amounts in most natural products and materials, it is ingested with food or water and inhaled with air. Only about 0.05% of ingested protactinium is absorbed into the blood and the remainder is excreted. From the blood, about 40% of the protactinium deposits in the bones, about 15% goes to the liver, 2% to the kidneys, and the rest leaves the body. The biological half-life of protactinium is about 50 years in the bones, whereas its biological half-life in other organs has a fast and slow component. For example, 70% of the protactinium in the liver has a biological half-life of 10 days, and the remaining 30% for 60 days. The corresponding values for kidneys are 20% (10 days) and 80% (60 days). In each affected organ, protactinium promotes cancer via its radioactivity.[37][65] The maximum safe dose of Pa in the human body is 0.03 μCi (1.1 kBq), which corresponds to 0.5 micrograms of 231Pa.[74] The maximum allowed concentrations of 231Pa in the air in Germany is 3×10−4 Bq/m3.[65]

See also

edit
  • Ada Hitchins, who helped Soddy in discovering the element protactinium

Notes

edit
  1. ^ The prefix "eka" is derived from the Sanskrit एक, meaning "one" or "first." In chemistry, it was formerly used to denote an element one period below the element name following it.

References

edit
  1. ^ "Standard Atomic Weights: Protactinium". CIAAW. 2017.
  2. ^ Prohaska, Thomas; Irrgeher, Johanna; Benefield, Jacqueline; Böhlke, John K.; Chesson, Lesley A.; Coplen, Tyler B.; Ding, Tiping; Dunn, Philip J. H.; Gröning, Manfred; Holden, Norman E.; Meijer, Harro A. J. (4 May 2022). "Standard atomic weights of the elements 2021 (IUPAC Technical Report)". Pure and Applied Chemistry. doi:10.1515/pac-2019-0603. ISSN 1365-3075.
  3. ^ a b c Arblaster, John W. (2018). Selected Values of the Crystallographic Properties of Elements. Materials Park, Ohio: ASM International. ISBN 978-1-62708-155-9.
  4. ^ a b Greenwood, Norman N.; Earnshaw, Alan (1997). Chemistry of the Elements (2nd ed.). Butterworth-Heinemann. p. 28. ISBN 978-0-08-037941-8.
  5. ^ a b Donohue, J. (1959). "On the crystal structure of protactinium metal". Acta Crystallographica. 12 (9): 697. doi:10.1107/S0365110X59002031.
  6. ^ Lide, D. R., ed. (2005). "Magnetic susceptibility of the elements and inorganic compounds". CRC Handbook of Chemistry and Physics (PDF) (86th ed.). Boca Raton (FL): CRC Press. ISBN 0-8493-0486-5.
  7. ^ Kondev, F. G.; Wang, M.; Huang, W. J.; Naimi, S.; Audi, G. (2021). "The NUBASE2020 evaluation of nuclear properties" (PDF). Chinese Physics C. 45 (3): 030001. doi:10.1088/1674-1137/abddae.
  8. ^ a b Meitner, Lise (1918). "Die Muttersubstanz des Actiniums, Ein Neues Radioaktives Element von Langer Lebensdauer". Zeitschrift für Elektrochemie und angewandte physikalische Chemie. 24 (11–12): 169–173. doi:10.1002/bbpc.19180241107. ISSN 0372-8323.
  9. ^ "Protactinium" (PDF). Human Health Fact Sheet. ANL (Argonne National Laboratory). November 2001. Retrieved 4 September 2023. The name comes from the Greek work protos (meaning first) and the element actinium, because protactinium is the precursor of actinium.
  10. ^ John Arnold Cranston Archived 11 March 2020 at the Wayback Machine. University of Glasgow
  11. ^ Negre, César et al. “Reversed flow of Atlantic deep water during the Last Glacial Maximum.” Nature, vol. 468,7320 (2010): 84-8. doi:10.1038/nature09508
  12. ^ a b c d e f Emsley, John (2003) [2001]. "Protactinium". Nature's Building Blocks: An A-Z Guide to the Elements. Oxford, England, UK: Oxford University Press. pp. 347–349. ISBN 978-0-19-850340-8.
  13. ^ Laing, Michael (2005). "A Revised Periodic Table: With the Lanthanides Repositioned". Foundations of Chemistry. 7 (3): 203. doi:10.1007/s10698-004-5959-9. S2CID 97792365.
  14. ^ Fessl, Sophie (2 January 2019). "How Far Does the Periodic Table Go?". JSTOR. Retrieved 9 January 2019.
  15. ^ National Research Council (U.S.). Conference on Glossary of Terms in Nuclear Science and Technology (1957). A Glossary of Terms in Nuclear Science and Technology. American Society of Mechanical Engineers. p. 180. Retrieved 25 July 2015.
  16. ^ Crookes, W. (1899). "Radio-Activity of Uranium". Proceedings of the Royal Society of London. 66 (424–433): 409–423. doi:10.1098/rspl.1899.0120. S2CID 93563820.
  17. ^ Johansson, Sven (1954). "Decay of UX1, UX2, and UZ". Physical Review. 96 (4): 1075–1080. Bibcode:1954PhRv...96.1075J. doi:10.1103/PhysRev.96.1075.
  18. ^ Greenwood, p. 1250
  19. ^ Greenwood, p. 1254
  20. ^ Fajans, K. & Gohring, O. (1913). "Über die komplexe Natur des Ur X". Naturwissenschaften. 1 (14): 339. Bibcode:1913NW......1..339F. doi:10.1007/BF01495360. S2CID 40667401.
  21. ^ Fajans, K. & Gohring, O. (1913). "Über das Uran X2-das neue Element der Uranreihe". Physikalische Zeitschrift. 14: 877–84.
  22. ^ a b Eric Scerri, A tale of seven elements, (Oxford University Press 2013) ISBN 978-0-19-539131-2, p.67–74
  23. ^ Fajans, K.; Morris, D. F. C. (1973). "Discovery and Naming of the Isotopes of Element 91" (PDF). Nature. 244 (5412): 137–138. Bibcode:1973Natur.244..137F. doi:10.1038/244137a0. hdl:2027.42/62921.
  24. ^ Soddy, F., Cranston, J.F. (1918) The parent of actinium. Proceedings of the Royal Society A – Mathematical, Physical and Engineering Sciences 94: 384-403.
  25. ^ "Protactinium - Element information : Chemistry in its element: protactinium". www.rsc.org. Royal Society of Chemistry. Retrieved 20 October 2023. At this point Fajans withdrew the name brevium since the custom was to name an element according to longest-lived isotope. Meitner than chose the name protactinium.
  26. ^ a b c d e Hammond, C. R. (29 June 2004). The Elements, in Handbook of Chemistry and Physics (81st ed.). CRC press. ISBN 978-0-8493-0485-9.
  27. ^ Greenwood, p. 1251
  28. ^ Shea, William R. (1983) Otto Hahn and the rise of nuclear physics, Springer, p. 213, ISBN 90-277-1584-X.
  29. ^ von Grosse, Aristid (1928). "Das Element 91; seine Eigenschaften und seine Gewinnung". Berichte der deutschen chemischen Gesellschaft. 61 (1): 233–245. doi:10.1002/cber.19280610137.
  30. ^ Graue, G.; Käding, H. (1934). "Die technische Gewinnung des Protactiniums". Angewandte Chemie. 47 (37): 650–653. Bibcode:1934AngCh..47..650G. doi:10.1002/ange.19340473706.
  31. ^ Grosse, A. V. (1934). "Metallic Element 91". Journal of the American Chemical Society. 56 (10): 2200–2201. doi:10.1021/ja01325a508.
  32. ^ a b Myasoedov, B. F.; Kirby, H. W.; Tananaev, I. G. (2006). "Chapter 4: Protactinium". In Morss, L. R.; Edelstein, N. M.; Fuger, J. (eds.). The Chemistry of the Actinide and Transactinide Elements (3rd ed.). Dordrecht, The Netherlands: Springer. Bibcode:2011tcot.book.....M. doi:10.1007/978-94-007-0211-0. ISBN 978-1-4020-3555-5. S2CID 93796247.
  33. ^ "Periodic Table of Elements: Protactinium". Los Alamos National Laboratory. Archived from the original on 28 September 2011. Retrieved 21 March 2013.
  34. ^ a b Audi, Georges; Bersillon, Olivier; Blachot, Jean; Wapstra, Aaldert Hendrik (2003), "The NUBASE evaluation of nuclear and decay properties", Nuclear Physics A, 729: 3–128, Bibcode:2003NuPhA.729....3A, doi:10.1016/j.nuclphysa.2003.11.001
  35. ^ a b Grosse, A. v.; Booth, E. T.; Dunning, J. R. (15 August 1939). "The Fission of Protactinium (Element 91)". Physical Review. 56 (4): 382. Bibcode:1939PhRv...56..382G. doi:10.1103/PhysRev.56.382. Retrieved 17 February 2023.
  36. ^ Tovesson, F.; Hambsch, F.-J; Oberstedt, A.; Fogelberg, B.; Ramström, E.; Oberstedt, S. (August 2002). "The Pa-233 Fission Cross Section". Journal of Nuclear Science and Technology. 39 (sup2): 210–213. Bibcode:2002JNST...39Q.210T. doi:10.1080/00223131.2002.10875076. S2CID 91866777.
  37. ^ a b c d e Protactinium Archived 7 March 2008 at the Wayback Machine, Argonne National Laboratory, Human Health Fact Sheet, August 2005
  38. ^ a b c Articles "Protactinium" and "Protactinium-231 – thorium-230 dating" in Encyclopædia Britannica, 15th edition, 1995, p. 737
  39. ^ Grosse, A. V.; Agruss, M. S. (1934). "The Isolation of 0.1 Gram of the Oxide of Element 91 (Protactinium)". Journal of the American Chemical Society. 56 (10): 2200. doi:10.1021/ja01325a507.
  40. ^ Cornelis, Rita (2005) Handbook of elemental speciation II: species in the environment, food, medicine & occupational health, Vol. 2, John Wiley and Sons, pp. 520–521, ISBN 0-470-85598-3.
  41. ^ a b Groult, Henri (2005) Fluorinated materials for energy conversion, Elsevier, pp. 562–565, ISBN 0-08-044472-5.
  42. ^ Hébert, Alain (July 2009). Applied Reactor Physics. Presses inter Polytechnique. p. 265. ISBN 978-2-553-01436-9.
  43. ^ a b c Marples, J. A. C. (1965). "On the thermal expansion of protactinium metal". Acta Crystallographica. 18 (4): 815–817. Bibcode:1965AcCry..18..815M. doi:10.1107/S0365110X65001871.
  44. ^ a b Fowler, R. D.; Matthias, B.; Asprey, L.; Hill, H.; et al. (1965). "Superconductivity of Protactinium". Physical Review Letters. 15 (22): 860. Bibcode:1965PhRvL..15..860F. doi:10.1103/PhysRevLett.15.860.
  45. ^ a b c d e f g h i j k l m n o p q Sellers, Philip A.; Fried, Sherman; Elson, Robert E.; Zachariasen, W. H. (1954). "The Preparation of Some Protactinium Compounds and the Metal". Journal of the American Chemical Society. 76 (23): 5935. doi:10.1021/ja01652a011.
  46. ^ Seitz, Frederick and Turnbull, David (1964) Solid state physics: advances in research and applications, Academic Press, pp. 289–291, ISBN 0-12-607716-9.
  47. ^ Young, David A. (1991) Phase diagrams of the elements, University of California Press, p. 222, ISBN 0-520-07483-1.
  48. ^ Buschow, K. H. J. (2005) Concise encyclopedia of magnetic and superconducting materials, Elsevier, pp. 129–130, ISBN 0-08-044586-1.
  49. ^ Hendricks, M. E. (1971). "Magnetic Properties of Protactinium Tetrachloride". Journal of Chemical Physics. 55 (6): 2993–2997. Bibcode:1971JChPh..55.2993H. doi:10.1063/1.1676528.
  50. ^ Greenwood, p. 1265
  51. ^ a b Greenwood, p. 1275
  52. ^ a b Asprey, L. B.; Kruse, F. H.; Rosenzweig, A.; Penneman, R. A. (1966). "Synthesis and X-Ray Properties of Alkali Fluoride-Protactinium Pentafluoride Complexes". Inorganic Chemistry. 5 (4): 659. doi:10.1021/ic50038a034.
  53. ^ Brown D.; Hall T.L.; Moseley P.T (1973). "Structural parameters and unit cell dimensions for the tetragonal actinide tetrachlorides(Th, Pa, U, and Np) and tetrabromides (Th and Pa)". Journal of the Chemical Society, Dalton Transactions (6): 686–691. doi:10.1039/DT9730000686.
  54. ^ Tahri, Y.; Chermette, H.; El Khatib, N.; Krupa, J.; et al. (1990). "Electronic structures of thorium and protactinium halide clusters of [ThX8]4− type". Journal of the Less Common Metals. 158: 105–116. doi:10.1016/0022-5088(90)90436-N.
  55. ^ a b c d e Brown, D.; Petcher, T. J.; Smith, A. J. (1968). "Crystal Structures of some Protactinium Bromides". Nature. 217 (5130): 737. Bibcode:1968Natur.217..737B. doi:10.1038/217737a0. S2CID 4264482.
  56. ^ a b Dodge, R. P.; Smith, G. S.; Johnson, Q.; Elson, R. E. (1967). "The crystal structure of protactinium pentachloride". Acta Crystallographica. 22 (1): 85–89. Bibcode:1967AcCry..22...85D. doi:10.1107/S0365110X67000155.
  57. ^ a b Brown, D.; Petcher, T. J.; Smith, A. J. (1969). "The crystal structure of β-protactinium pentabromide". Acta Crystallographica B. 25 (2): 178. Bibcode:1969AcCrB..25..178B. doi:10.1107/S0567740869007357.
  58. ^ a b c Brandel, V.; Dacheux, N. (2004). "Chemistry of tetravalent actinide phosphates—Part I". Journal of Solid State Chemistry. 177 (12): 4743. Bibcode:2004JSSCh.177.4743B. doi:10.1016/j.jssc.2004.08.009.
  59. ^ a b Starks, David F.; Parsons, Thomas C.; Streitwieser, Andrew; Edelstein, Norman (1974). "Bis(π-cyclooctatetraene) protactinium". Inorganic Chemistry. 13 (6): 1307. doi:10.1021/ic50136a011.
  60. ^ Greenwood, p. 1268
  61. ^ a b Elson, R.; Fried, Sherman; Sellers, Philip; Zachariasen, W. H. (1950). "The tetravalent and pentavalent states of protactinium". Journal of the American Chemical Society. 72 (12): 5791. doi:10.1021/ja01168a547.
  62. ^ Greenwood, p. 1269
  63. ^ Iyer, P. N.; Smith, A. J. (1971). "Double oxides containing niobium, tantalum or protactinium. IV. Further systems involving alkali metals". Acta Crystallographica B. 27 (4): 731. Bibcode:1971AcCrB..27..731I. doi:10.1107/S056774087100284X.
  64. ^ Iyer, P. N.; Smith, A. J. (1967). "Double oxides containing niobium, tantalum, or protactinium. III. Systems involving the rare earths". Acta Crystallographica. 23 (5): 740. Bibcode:1967AcCry..23..740I. doi:10.1107/S0365110X67003639.
  65. ^ a b c Grossmann, R.; Maier, H.; Szerypo, J.; Friebel, H. (2008). "Preparation of 231Pa targets". Nuclear Instruments and Methods in Physics Research A. 590 (1–3): 122. Bibcode:2008NIMPA.590..122G. doi:10.1016/j.nima.2008.02.084.
  66. ^ Greenwood, p. 1270
  67. ^ a b c Greenwood, p. 1271
  68. ^ Greenwood, p. 1277
  69. ^ Greenwood, pp. 1278–1279
  70. ^ Seifritz, Walter (1984) Nukleare Sprengkörper – Bedrohung oder Energieversorgung für die Menschheit, Thiemig-Verlag, ISBN 3-521-06143-4.
  71. ^ Ganesan, S. (1999). "A Re-calculation of Criticality Property of 231Pa Using New Nuclear Data" (PDF). Current Science. 77 (5): 667–677. Archived from the original (PDF) on 3 March 2016. Retrieved 21 March 2013.
  72. ^ McManus, J. F.; Francois, R.; Gherardi, J.-M.; Keigwin, L. D.; et al. (2004). "Collapse and rapid resumption of Atlantic meridional circulation linked to deglacial climate changes" (PDF). Nature. 428 (6985): 834–837. Bibcode:2004Natur.428..834M. doi:10.1038/nature02494. PMID 15103371. S2CID 205210064. Archived from the original (PDF) on 10 April 2013. Retrieved 29 November 2010.
  73. ^ Cheng, H.; Edwards, R.Lawrence; Murrell, M. T.; Benjamin, T. M. (1998). "Uranium-thorium-protactinium dating systematics". Geochimica et Cosmochimica Acta. 62 (21–22): 3437. Bibcode:1998GeCoA..62.3437C. doi:10.1016/S0016-7037(98)00255-5.
  74. ^ Palshin, E.S.; et al. (1968). Analytical chemistry of protactinium. Moscow: Nauka.

Bibliography

edit
edit
 
Wikimedia Commons has media related to Protactinium.
 
Look up protactinium in Wiktionary, the free dictionary.

Retrieved from "https://en.wikipedia.org/w/index.php?title=Protactinium&oldid=1259465899"