Selected picture 1
Selected picture 2
Portal:Electronics/Selected picture/2
Credit: User:John Fader
Both sides of the printed circuit board inside a typical keydrive (circa 2004), in this case an inexpensive 64 Mbyte USB2.0 device.
Selected picture 3
Portal:Electronics/Selected picture/3
Credit: User:Jeremykemp, User:pbroks13
A mouse. 1: Pulling the mouse turns the ball. 2: X and Y rollers grip the ball and transfer movement. 3: Optical encoding disks include light holes. 4: Infrared LEDs shine through the disks. 5: Sensors gather light pulses to convert to X and Y velocities.
Selected picture 4
Portal:Electronics/Selected picture/4
Credit: Matt Gibbs, User:Matt Britt
Macro shot of an Intel 80486DX2 CPU die in its packaging. The actual size of the die in the center is 12×6.75 mm.
Selected picture 5
Portal:Electronics/Selected picture/5
Credit: User:BillC
Idealised single-phase transformer showing path of magnetic flux through the core.
Selected picture 6
Selected picture 7
Portal:Electronics/Selected picture/7
Credit: commons:User:Peo
Illustration showing the interior of a cathode-ray tube for color televisions and monitors.
Selected picture 8
Selected picture 9
Selected picture 10
Selected picture 11
Portal:Electronics/Selected picture/11
Credit: Corps of Engineers
This 90-foot (27m) diameter radar installation monitors the northern Alaskan sky.
Selected picture 12
Portal:Electronics/Selected picture/12
Credit: commons:User:Pixel8
Sinclair 48K ZX Spectrum motherboard (Issue 3B. 1983) (manufactured 1984)
Selected picture 13
Portal:Electronics/Selected picture/13
Credit: commons:User:Peo
The Hall effect for different directions of electric current and magnetic field.
Selected picture 14
Portal:Electronics/Selected picture/14
Credit: commons:User:Angeloleithold
Microprocessor manufactured by photographic process, works submerged in liquid Nitrogen at 4.8 GHz.
Selected picture 15
Portal:Electronics/Selected picture/15
Credit: Tony R. Kuphaldt, User:Dna-webmaster
Lissajous figures on an oscilloscope (90 degrees phase shift).
Selected picture 16
Selected picture 17
Portal:Electronics/Selected picture/17
Credit: User:Jjron
The interior of the Australian Synchrotron facility. Dominating the image is the storage ring, with an experimental endstation at front right. In the middle of the storage ring is the booster synchrotron and linac
Selected picture 18
Selected picture 19
Selected picture 20
Portal:Electronics/Selected picture/20
Credit: User:Kevin Qubit Boy
Flux qubit made in the Nano group at Royal Holloway University of London.
Selected picture 21
Portal:Electronics/Selected picture/21
Credit: [1], User:Jason Palpatine
Bombardier's Information File(BIF) that describes the components and controls of the Norden bombsight.
Selected picture 22
Portal:Electronics/Selected picture/22
Credit: commons:User:Richard Bartz
A parabolic antenna in Erdfunkstelle Raisting, the biggest facility for satellite communication in the world.
Selected picture 23
Selected picture 24
Portal:Electronics/Selected picture/24
Credit: User:Iantresman
Electric discharge showing the lightning-like plasma filaments from a Tesla coil.
Selected picture 25
Portal:Electronics/Selected picture/25
Credit: User:MIckStephenson
The yellow-tipped EIAJ connector is a small (~2 cm) standard DC power supply jack for small appliances, commonly used to adapt transformers converting mains power for laptop computers and peripheral devices.
Selected picture 26
Portal:Electronics/Selected picture/26
Credit: de:Benutzer:Peter nussbaumer
A magnet is suspended over a liquid nitrogen cooled high-temperature superconductor (-200°C).
Selected picture 27
Selected picture 28
Selected picture 29
Selected picture 30
Selected picture 31
Selected picture 32
Selected picture 33
Selected picture 34
Selected picture 35
Selected picture 36
Selected picture 37
Suggestions
This section is currently inactive and is retained for historical reference. Either the page is no longer relevant or consensus on its purpose has become unclear. |
Is there a high quality electronics-related picture this portal can't live without? Please post your suggestions below to let your voice be heard.
Procedure
The nomination process here is relaxed, but articles that meet the featured article or featured picture requirements are more likely to gain support.
Nominating articles
- Find a picture or animation related to electronics that you think is very good. It need not be a current Featured Article or Featured picture, but if it is, it could only help the nomination.
- If the article was previously nominated for featured status, or if it has been on peer review, try to resolve as many of the remaining objections as possible.
- In the nominations section below, add a third level section header with the linked page title as the section name (
===[[Page title]]===
). Below this new header, add your reasons for nomination and sign your nomination with~~~~
.
Supporting and objecting
- If you approve of a nomination, write "Support" followed by your reasons.
- A nomination is considered a vote in support, so nominators don't need to add another vote to their nominations.
- If you oppose a nomination, write "Oppose" followed by the reasons for your objection. Where possible, objections should provide a specific rationale that can be addressed.
- To withdraw an objection, strike it out (with
<s>...</s>
) rather than removing it.
- To withdraw an objection, strike it out (with