Remote Authentication Dial-In User Service (RADIUS) is a networking protocol that provides centralized authentication, authorization, and accounting (AAA) management for users who connect and use a network service. RADIUS was developed by Livingston Enterprises in 1991 as an access server authentication and accounting protocol. It was later brought into IEEE 802 and IETF standards.

RADIUS is a client/server protocol that runs in the application layer, and can use either TCP or UDP. Network access servers, which control access to a network, usually contain a RADIUS client component that communicates with the RADIUS server.[1] RADIUS is often the back-end of choice for 802.1X authentication.[2] A RADIUS server is usually a background process running on UNIX or Microsoft Windows.[1]

The Blast-RADIUS attack breaks RADIUS when it is run on an unencrypted transport protocol like UDP.[3]

Protocol components

edit

RADIUS is an AAA (authentication, authorization, and accounting) protocol that manages network access. RADIUS uses two types of packets to manage the full AAA process: Access-Request, which manages authentication and authorization; and Accounting-Request, which manages accounting. Authentication and authorization are defined in RFC 2865 while accounting is described by RFC 2866.

Authentication and authorization

edit

The user or machine sends a request to a Network Access Server (NAS) to gain access to a particular network resource using access credentials. The credentials are passed to the NAS device via the link-layer protocol—for example, Point-to-Point Protocol (PPP) in the case of many dialup or DSL providers or posted in an HTTPS secure web form.

In turn, the NAS sends a RADIUS Access Request message to the RADIUS server, requesting authorization to grant access via the RADIUS protocol.[4]

This request includes access credentials, typically in the form of username and password or security certificate provided by the user. Additionally, the request may contain other information which the NAS knows about the user, such as its network address or phone number, and information regarding the user's physical point of attachment to the NAS.

The RADIUS server checks that the information is correct using authentication schemes such as PAP, CHAP or EAP. The user's proof of identification is verified, along with, optionally, other information related to the request, such as the user's network address or phone number, account status, and specific network service access privileges. Historically, RADIUS servers checked the user's information against a locally stored flat file database. Modern RADIUS servers can do this, or can refer to external sources—commonly SQL, Kerberos, LDAP, or Active Directory servers—to verify the user's credentials.

 
RADIUS Authentication and Authorization Flow

The RADIUS server then returns one of three responses to the NAS: 1) Access Reject, 2) Access Challenge, or 3) Access Accept.

Access Reject
The user is unconditionally denied access to all requested network resources. Reasons may include failure to provide proof of identification or an unknown or inactive user account.
Access Challenge
Requests additional information from the user such as a secondary password, PIN, token, or card. Access Challenge is also used in more complex authentication dialogs where a secure tunnel is established between the user machine and the Radius Server in a way that the access credentials are hidden from the NAS.
Access Accept
The user is granted access. Once the user is authenticated, the RADIUS server will often check that the user is authorized to use the network service requested. A given user may be allowed to use a company's wireless network, but not its VPN service, for example. Again, this information may be stored locally on the RADIUS server, or may be looked up in an external source such as LDAP or Active Directory.

Each of these three RADIUS responses may include a Reply-Message attribute which may give a reason for the rejection, the prompt for the challenge, or a welcome message for the accept. The text in the attribute can be passed on to the user in a return web page.

Authorization attributes are conveyed to the NAS stipulating terms of access to be granted. For example, the following authorization attributes may be included in an Access-Accept:

  • The specific IP address to be assigned to the user
  • The address pool from which the user's IP address should be chosen
  • The maximum length of time that the user may remain connected
  • An access list, priority queue or other restrictions on a user's access
  • L2TP parameters
  • VLAN parameters
  • Quality of Service (QoS) parameters

When a client is configured to use RADIUS, any user of the client presents authentication information to the client. This might be with a customizable login prompt, where the user is expected to enter their username and password. Alternatively, the user might use a link framing protocol such as the Point-to-Point Protocol (PPP), which has authentication packets which carry this information.

Once the client has obtained such information, it may choose to authenticate using RADIUS. To do so, the client creates an "Access- Request" containing such Attributes as the user's name, the user's password, the ID of the client and the port ID which the user is accessing. When a password is present, it is hidden using a method based on the RSA Message Digest Algorithm MD5.

Accounting

edit
 
RADIUS Accounting Flow

Accounting is described in RFC 2866.

When network access is granted to the user by the NAS, an Accounting Start (a RADIUS Accounting Request packet containing an Acct-Status-Type attribute with the value "start") is sent by the NAS to the RADIUS server to signal the start of the user's network access. "Start" records typically contain the user's identification, network address, point of attachment and a unique session identifier.[5]

Periodically, Interim Update records (a RADIUS Accounting Request packet containing an Acct-Status-Type attribute with the value "interim-update") may be sent by the NAS to the RADIUS server, to update it on the status of an active session. "Interim" records typically convey the current session duration and information on current data usage.

Finally, when the user's network access is closed, the NAS issues a final Accounting Stop record (a RADIUS Accounting Request packet containing an Acct-Status-Type attribute with the value "stop") to the RADIUS server, providing information on the final usage in terms of time, packets transferred, data transferred, reason for disconnect and other information related to the user's network access.

Typically, the client sends Accounting-Request packets until it receives an Accounting-Response acknowledgement, using some retry interval.

The primary purpose of this data is that the user can be billed accordingly; the data is also commonly used for statistical purposes and for general network monitoring.

Roaming

edit
 
Roaming using a proxy RADIUS AAA server.

RADIUS is commonly used to facilitate roaming between ISPs, including by:

  • Companies which provide a single global set of credentials that are usable on many public networks;
  • Independent, but collaborating, institutions issuing their own credentials to their own users, that allow a visitor from one to another to be authenticated by their home institution, such as in eduroam.

RADIUS facilitates this by the use of realms, which identify where the RADIUS server should forward the AAA requests for processing.

Realms

edit

A realm is commonly appended to a user's user name and delimited with an '@' sign, resembling an email address domain name. This is known as postfix notation for the realm. Another common usage is prefix notation, which involves prepending the realm to the username and using '\' as a delimiter. Modern RADIUS servers allow any character to be used as a realm delimiter, although in practice '@' and '\' are usually used.

Realms can also be compounded using both prefix and postfix notation, to allow for complicated roaming scenarios; for example, somedomain.com\username@anotherdomain.com could be a valid username with two realms.

Although realms often resemble domains, it is important to note that realms are in fact arbitrary text and need not contain real domain names. Realm formats are standardized in RFC 4282, which defines a Network Access Identifier (NAI) in the form of 'user@realm'. In that specification, the 'realm' portion is required to be a domain name. However, this practice is not always followed. RFC 7542[6] replaced RFC 4282 in May 2015.

Proxy operations

edit

When a RADIUS server receives an AAA request for a user name containing a realm, the server will reference a table of configured realms. If the realm is known, the server will then proxy the request to the configured home server for that domain. The behavior of the proxying server regarding the removal of the realm from the request ("stripping") is configuration-dependent on most servers. In addition, the proxying server can be configured to add, remove or rewrite AAA requests when they are proxied over time again.

Proxy Chaining is possible in RADIUS and authentication/authorization and accounting packets are usually routed between a NAS Device and a Home server through a series of proxies. Some of advantages of using proxy chains include scalability improvements, policy implementations and capability adjustments. But in roaming scenarios, the NAS, Proxies and Home Server could be typically managed by different administrative entities. Hence, the trust factor among the proxies gains more significance under such Inter-domain applications. Further, the absence of end to end security in RADIUS adds to the criticality of trust among the Proxies involved. Proxy Chains are explained in RFC 2607.

Security

edit

Roaming with RADIUS exposes the users to various security and privacy concerns. More generally, some roaming partners establish a secure tunnel between the RADIUS servers to ensure that users' credentials cannot be intercepted while being proxied across the internet. This is a concern as the MD5 hash built into RADIUS is considered insecure.[7]

Packet structure

edit
 
RADIUS packet data format.

RADIUS is transported over UDP/IP on ports 1812 and 1813.[8]

The RADIUS packet data format is shown to the right. The fields are transmitted from left to right, starting with the code, the identifier, the length, the authenticator and the attributes.

Assigned RADIUS Codes (decimal) include the following:[9]

Code Assignment
1 Access-Request
2 Access-Accept
3 Access-Reject
4 Accounting-Request
5 Accounting-Response
11 Access-Challenge
12 Status-Server (experimental)
13 Status-Client (experimental)
40 Disconnect-Request
41 Disconnect-ACK
42 Disconnect-NAK
43 CoA-Request
44 CoA-ACK
45 CoA-NAK
255 Reserved

The Identifier field aids in matching requests and replies.

The Length field indicates the length of the entire RADIUS packet including the Code, Identifier, Length, Authenticator and optional Attribute fields.

The Authenticator is used to authenticate the reply from the RADIUS server, and is used in encrypting passwords; its length is 16 bytes.

Attribute value pairs

edit
 
RADIUS AVP layout

The RADIUS Attribute Value Pairs (AVP) carry data in both the request and the response for the authentication, authorization, and accounting transactions. The length of the radius packet is used to determine the end of the AVPs.

Vendor-specific attributes

edit

RADIUS is extensible; many vendors of RADIUS hardware and software implement their own variants using Vendor-Specific Attributes (VSAs). Microsoft has published some of their VSAs.[10] VSA definitions from many other companies remain proprietary and/or ad hoc, nonetheless many VSA dictionaries can be found by downloading the source code of open source RADIUS implementations, for example FreeRADIUS.

RFC 2865 Section 5.26 provides a suggested encoding which most vendors follow:

26 (1 octet) Length (1 octet) Vendor Id (4 bytes Big Endian) Vendor type/attribute (1 octet) Vendor Length (1 octet) = 2 + length of (Value) Value

Some vendors use different formats. For example, some vendors drop the "Vendor Length" field, or they use 2 octets for the "Vendor Type" and/or the "Vendor Length" fields.

RFC 8044 Section 3.14 defines the "vsa" data type which mandates the RFC 2865 Section 5.26 format.

Security

edit

The RADIUS protocol transmits obfuscated passwords using a shared secret and the MD5 hashing algorithm. As this particular implementation provides only weak protection of the user's credentials,[11] additional protection, such as IPsec tunnels or physically secured data-center networks, should be used to further protect the RADIUS traffic between the NAS device and the RADIUS server. Additionally, the user's security credentials are the only part protected by RADIUS itself, yet other user-specific attributes such as tunnel-group IDs or VLAN memberships passed over RADIUS may be considered sensitive (helpful to an attacker) or private (sufficient to identify the individual client) information as well.[citation needed].

The RadSec protocol addresses the issue with legacy RADIUS/UDP security by "wrapping" the RADIUS protocol in TLS. However, the packets inside of the TLS transport still use MD5 for packet integrity checks and for obfuscating the contents of certain attributes.

The Blast-RADIUS attack breaks RADIUS when it is transported by plain UDP by attacking MD5 within RADIUS.[3] RadSec blocks this attack.[3] Another recommended mitigation is to require Message-Authenticator attributes for all requests and responses.[3] CVE-2024-3596 has been assigned for the Blast-RADIUS attack.

History

edit

As more dial-up customers used the NSFNET a request for proposal was sent out by Merit Network in 1991 to consolidate their various proprietary authentication, authorization and accounting systems. Among the early respondents was Livingston Enterprises and an early version of the RADIUS was written after a meeting. The early RADIUS server was installed on a UNIX operating system. Livingston Enterprises was acquired by Lucent Technologies and together with Merit steps were taken to gain industry acceptance for RADIUS as a protocol. Both companies offered a RADIUS server at no charge.[12] In 1997 RADIUS was published as RFC 2058 and RFC 2059, current versions are RFC 2865 and RFC 2866.[13]

The original RADIUS standard specified that RADIUS is stateless and should run over the User Datagram Protocol (UDP). For authentication it was envisaged that RADIUS should support the Password Authentication Protocol (PAP) and the Challenge-Handshake Authentication Protocol (CHAP) over the Point-to-Point Protocol. Passwords are hidden by taking the MD5 hash of the packet and a shared secret, and then XORing that hash with the password. The original RADIUS also provided more than 50 attribute-value pairs, with the possibility for vendors to configure their own pairs.[14]

The choice of the hop-by-hop security model, rather than end-to-end encryption, meant that if several proxy RADIUS servers are in use, every server must examine, perform logic on and pass on all data in a request. This exposes data such as passwords and certificates at every hop. RADIUS servers also did not have the ability to stop access to resources once an authorisation had been issued. Subsequent standards such as RFC 3576 and its successor RFC 5176 allowed for RADIUS servers to dynamically change a users authorization, or to disconnect a user entirely.[15]

Now, several commercial and open-source RADIUS servers exist. Features can vary, but most can look up the users in text files, LDAP servers, various databases, etc. Accounting records can be written to text files, various databases, forwarded to external servers, etc. SNMP is often used for remote monitoring and keep-alive checking of a RADIUS server. RADIUS proxy servers are used for centralized administration and can rewrite RADIUS packets on the fly for security reasons, or to convert between vendor dialects.

The Diameter protocol was intended as the replacement for RADIUS. While both are Authentication, Authorization, and Accounting (AAA) protocols, the use-cases for the two protocols have since diverged. Diameter is largely used in the 3G space. RADIUS is used elsewhere. One of the largest barriers to having Diameter replace RADIUS is that switches and Access Points typically implement RADIUS, but not Diameter. Diameter uses SCTP or TCP while RADIUS typically uses UDP as the transport layer. As of 2012, RADIUS can also use TCP as the transport layer with TLS for security.

Standards documentation

edit

The RADIUS protocol is currently defined in the following IETF RFC documents.

RFC Title Date published Related article Related RFCs Note
RFC 2058 Remote Authentication Dial In User Service (RADIUS) January 1997 RADIUS Obsoleted by RFC 2138
RFC 2059 RADIUS Accounting January 1997 RADIUS Obsoleted by RFC 2139
RFC 2138 Remote Authentication Dial In User Service (RADIUS) April 1997 RADIUS Obsoleted by RFC 2865
RFC 2139 RADIUS Accounting April 1997 RADIUS Obsoleted by RFC 2866
RFC 2548 Microsoft Vendor-specific RADIUS Attributes March 1999 RADIUS
RFC 2607 Proxy Chaining and Policy Implementation in Roaming June 1999
RFC 2618 RADIUS Authentication Client MIB Management information base Obsoleted by RFC 4668
RFC 2619 RADIUS Authentication Server MIB Management information base Obsoleted by RFC 4669
RFC 2620 RADIUS Accounting Client MIB June 1999 Management information base Obsoleted by RFC 4670
RFC 2621 RADIUS Accounting Server MIB June 1999 Management information base Obsoleted by RFC 4671
RFC 2809 Implementation of L2TP Compulsory Tunneling via RADIUS April 2000
RFC 2865 Remote Authentication Dial In User Service (RADIUS) June 2000 RADIUS Updated by RFC 2868, RFC 3575, RFC 5080 This standard describes RADIUS authentication and authorization between a Network Access Server (NAS) and a shared RADIUS authentication server. This protocol is also used to carry configuration information from the RADIUS server to the NAS.
RFC 2866 RADIUS Accounting June 2000 RADIUS This standard describes how accounting information is carried from the NAS to a shared RADIUS accounting server.
RFC 2867 RADIUS Accounting Modifications for Tunnel Protocol Support June 2000 RADIUS Updates RFC 2866
RFC 2868 RADIUS Attributes for Tunnel Protocol Support June 2000 Updates RFC 2865
RFC 2869 RADIUS Extensions June 2000 Updated by RFC 3579, RFC 5080
RFC 2882 Network Access Servers Requirements: Extended RADIUS Practices July 2000
RFC 3162 RADIUS and IPv6 August 2001
RFC 3575 IANA Considerations for RADIUS July 2003
RFC 3576 Dynamic Authorization Extensions to RADIUS July 2003 Obsoleted by RFC 5176
RFC 3579 RADIUS Support for EAP September 2003 Extensible Authentication Protocol Updates RFC 2869
RFC 3580 IEEE 802.1X RADIUS Usage Guidelines September 2003 802.1X
RFC 4014 RADIUS Attributes Suboption for the DHCP Relay Agent Information Option February 2005
RFC 4372 Chargeable User Identity January 2006
RFC 4590 RADIUS Extension for Digest Authentication July 2006 Obsoleted by RFC 5090
RFC 4668 RADIUS Authentication Client MIB for IPv6 August 2006 Management information base
RFC 4669 RADIUS Authentication Server MIB for IPv6 August 2006 Management information base
RFC 4670 RADIUS Accounting Client MIB for IPv6 August 2006 Management information base
RFC 4671 RADIUS Accounting Server MIB for IPv6 August 2006 Management information base
RFC 4675 RADIUS Attributes for Virtual LAN and Priority Support September 2006
RFC 4679 DSL Forum Vendor-Specific RADIUS Attributes September 2006
RFC 4818 RADIUS Delegated-IPv6-Prefix Attribute April 2007
RFC 4849 RADIUS Filter Rule Attribute April 2007
RFC 5080 Common RADIUS Implementation Issues and Suggested Fixes December 2007 Updates RFC 3579
RFC 5090 RADIUS Extension for Digest Authentication February 2008
RFC 5176 Dynamic Authorization Extensions to RADIUS January 2008
RFC 5607 RADIUS Authorization for NAS Management July 2009
RFC 5997 Use of Status-Server Packets in the RADIUS Protocol August 2010 Updates RFC 2866
RFC 6158 RADIUS Design Guidelines March 2011
RFC 6218 Cisco Vendor-Specific RADIUS Attributes for the Delivery of Keying Material April 2011
RFC 6421 Crypto-Agility Requirements for Remote Authentication Dial-In User Service (RADIUS) November 2011
RFC 6613 RADIUS over TCP May 2012 Experimental
RFC 6614 Transport Layer Security (TLS) Encryption for RADIUS May 2012 Experimental
RFC 6911 RADIUS Attributes for IPv6 Access Networks April 2013 Standards track
RFC 6929 Remote Authentication Dial-In User Service (RADIUS) Protocol Extensions April 2013 Updates RFC 2865, RFC 3575, RFC 6158
RFC 7360 Datagram Transport Layer Security (DTLS) as a Transport Layer for RADIUS September 2014 Experimental
RFC 7585 Dynamic Peer Discovery for RADIUS/TLS and RADIUS/DTLS Based on the Network Access Identifier (NAI) Oct 2015 Experimental
RFC 8044 Data Types in RADIUS January 2017 Updates: 2865, 3162, 4072, 6158, 6572, 7268
RFC 8559 Dynamic Authorization Proxying in the RADIUS Protocol April 2019 Standards track

See also

edit

References

edit
  1. ^ a b "How Does RADIUS Work?". Cisco. 2006-01-19. Retrieved 2009-04-15.
  2. ^ Edwin Lyle Brown (2006). 802.1X Port-Based Authentication. Taylor & Francis. p. 17. ISBN 978-1-4200-4465-2.
  3. ^ a b c d "Blast-RADIUS". July 9, 2024. Retrieved July 10, 2024.
  4. ^ RFC 2865 Remote Authentication Dial In User Service (RADIUS)
  5. ^ RFC 2866 RADIUS Accounting
  6. ^ Dekok, A. (May 2015). "The Network Access Identifier". Internet Engineering Task Force (IETF). doi:10.17487/RFC7542. Retrieved 8 May 2021.
  7. ^ Alexander Sotirov; Marc Stevens; Jacob Appelbaum; Arjen Lenstra; David Molnar; Dag Arne Osvik; Benne de Weger (2008-12-08). "MD5 considered harmful today - Creating a rogue CA certificate". Technische Universiteit Eindhoven. Retrieved 2009-04-19.
  8. ^ "Configure NPS UDP Port Information". Microsoft. 2020-08-07. Retrieved 2021-06-20.
  9. ^ "IANA Considerations for RADIUS (Remote Authentication Dial In User Service)". Ietf Datatracker. Internet Engineering Task Force (IETF). July 2003. Retrieved 8 May 2021.
  10. ^ RFC 2548
  11. ^ An Analysis of the RADIUS Authentication Protocol
  12. ^ Jonathan Hassell (2003). RADIUS: Securing Public Access to Private Resources. O'Reilly Media. pp. 15–16. ISBN 9780596003227.
  13. ^ John Vollbrecht (2006). "The Beginnings and History of RADIUS" (PDF). Interlink Networks. Retrieved 2009-04-15.
  14. ^ Jonathan Hassell (2003). RADIUS: Securing Public Access to Private Resources. O'Reilly Media. p. 16. ISBN 9780596003227.
  15. ^ "Dynamic Authorization Extensions to Remote Authentication Dial In User Service (RADIUS)". Ietf Datatracker. Internet Engineering Task Force. January 2008. Retrieved 8 May 2021.

Bibliography

edit
edit