RCAF Station Gimli was an air station of the Royal Canadian Air Force (RCAF) located near Gimli, Manitoba, Canada.

CFB Gimli
Near Gimli, Manitoba in Canada
CFB Gimli is located in Manitoba
CFB Gimli
CFB Gimli
Coordinates50°37′41″N 97°02′36″W / 50.62806°N 97.04333°W / 50.62806; -97.04333
Site information
OwnerDepartment of National Defence
OperatorRCAF (1943–1968); CAF (1968–1971)
Site history
In use1943–1945, 1950–1971
FateTurned over to RM of Gimli
Garrison information
OccupantsNo. 18 SFTS (1943–1945); No. 2 FTS; No. 3 AFS (1950−1964); No. 1 AFTS (1964–1971)
Airfield information
Elevation753 ft (230 m) AMSL
Runways
Direction Length and surface
14L/32R 6,858 ft (2,090 m) Asphalt
15R/33L 6,788 ft (2,069 m) Asphalt
Other airfield
facilities
Elevation and coordinates from COPA.[1]
Airfields

World War II (1943–1945)

edit

On September 6, 1943, the British Commonwealth Air Training Plan established No. 18 Service Flying Training School (No. 18 SFTS) to train aircrew for Second World War operations using the Avro Anson. No. 18 SFTS ceased operation on May 30, 1945.

Aerodrome data c.1942

edit

In approximately 1942 the aerodrome was listed at 50°38′N 97°03′W / 50.633°N 97.050°W / 50.633; -97.050 with a Var. 10 degrees E and elevation of 760 ft (230 m). Six runways were listed as under construction and detailed as follows: [2]

Runway Name Length Width Surface
3L/21R 4,200 ft (1,300 m) 100 ft (30 m) Hard surfaced
3R/21L 4,100 ft (1,200 m) 100 ft (30 m) Hard surfaced
15L/33R 4,300 ft (1,300 m) 100 ft (30 m) Hard surfaced
15R/33L 3,800 ft (1,200 m) 100 ft (30 m) Hard surfaced
9L/27R 4,800 ft (1,500 m) 100 ft (30 m) Hard surfaced
9R/27L 4,800 ft (1,500 m) 100 ft (30 m) Hard surfaced

Relief landing field – Netley, MB (1942)

edit

The only Relief Landing field for RCAF Station Gimli was located approximately 10 Miles South on the west side of the hamlet of Netley, Manitoba. The Relief field was constructed in the typical triangular pattern. In approximately 1942 the aerodrome was listed at 50°22′N 96°59′W / 50.367°N 96.983°W / 50.367; -96.983 with a Var. 10 degrees E and elevation of 750 ft (230 m). Three runways were listed as under construction and detailed as follows: [3]

Runway Name Length Width Surface
14/32 4,300 ft (1,300 m) 150 ft (46 m) Hard surfaced
8/26 5,200 ft (1,600 m) 150 ft (46 m) Hard surfaced
2/20 4,200 ft (1,300 m) 150 ft (46 m) Hard surfaced

On a recent drive by the site of the Netley Relief Landing Field (May 2018) there is little trace of the aerodrome from the ground but the former runways can be made out from the satellite imagery available on google maps.

Cold War (1950–1971)

edit

During the Cold War period, many Second World War air stations were reactivated. Gimli was one of these, and was reopened in 1950 to become a jet aircraft training station. Flying training schools located here include No. 2 Flying Training School, No. 3 Advanced Flying School (redesignated in 1964 to No. 1 Flying Training School), and No. 1 Advanced Flying Training School. Married Quarters were built on the base at some point during this period. The former married Quarters are now the community of Aspen Park. At some point after the Base was re-opened the Runways were reconfigured from the 6 runway triangular pattern to 2 longer, roughly parallel, asphalt surfaces. After unification of the three services in 1968, RCAF Station Gimli became a Canadian Forces Base (CFB). CFB Gimli closed in September 1971 and the flying schools moved to other Canadian forces bases.

Post closure

edit

Part of the aerodrome is now used as an industrial park and a racetrack, but part continues operation as the Gimli Industrial Park Airport. Flying related activities include use by Manitoba Provincial Government water bomber squadron, the Regional Gliding School (Northwest), and two private flying schools. Gimli is also used by No. 435 Transport and Rescue Squadron based at 17 Wing Winnipeg, for training purposes.

Air Canada Flight 143 (Gimli Glider)

edit

The Gimli airfield became the focus of international attention on Saturday, July 23, 1983,[4] when Air Canada Flight 143 made an emergency landing there after a 17-minute powerless glide due to fuel exhaustion. On that day, the runways were being used for race-car activities on 'Family Day' for the Sports Car club from Winnipeg. Flight 143's captain executed a sideslip, before touching down on the tarmac. None of 69 people on board the Boeing 767 aircraft were seriously injured, because the impact with the ground was minimized by the reduced landing speed provided by the slip that increased drag and caused the airplane to quickly reduce speed and to lose altitude.[5] This maneuver is commonly used with gliders and light aircraft but was a first with a commercial aircraft.[6]

See also

edit

References

edit
  1. ^ "Places to Fly – Gimli Industrial". Canadian Owners and Pilots Association (COPA).
  2. ^ Staff writer (c. 1942). Pilots Handbook of Aerodromes and Seaplane Bases Vol. 2. Royal Canadian Air Force. p. 9.
  3. ^ Staff writer (c. 1942). Pilots Handbook of Aerodromes and Seaplane Bases Vol. 2. Royal Canadian Air Force. p. 14.
  4. ^ "What Happened on July 23, 1983". OnThisDay.com. 23 July 1983. Retrieved 2022-12-24.
  5. ^ Wade H. Nelson (1997). "The Gimli Glider Incident – From an article published in Soaring Magazine". Math Courses – Math 100. University of Hawai'i. Retrieved 8 January 2016. "(The dragstrip began in the middle of the runway with the guardrail extending towards 32L's threshold) Pearson applied extra right brake so the main gear would straddle the guardrail.
  6. ^ "Gimli Glider". Mayday. Season 5. 2008. Discovery Channel Canada / National Geographic Channel. Quote: "Bob Pearson has done what no one has done before. He has safely landed a 767 with no engines, gliding to safety from more than 26,000 feet."