Royston and Notton railway station was opened in 1841 by the North Midland Railway, near the Yorkshire summit of the line, on the south side of Navvy Lane bridge.
Royston and Notton | |
|---|---|
 The station in 1951 | |
| General information | |
| Location | Royston, Metropolitan Borough of Barnsley England |
| Coordinates | 53°36′00″N 1°26′11″W / 53.59993°N 1.43645°W |
| Grid reference | SE373116 |
| Platforms | 4 |
| Other information | |
| Status | Disused |
| History | |
| Original company | Midland Railway |
| Post-grouping | London, Midland and Scottish Railway |
| Key dates | |
| 6 April 1841 | Station opened |
| 1 July 1900 | replaced with new station |
| 1 January 1968 | Station closed[1] |
The original station was rebuilt, about a mile further south, in 1900 when the lines were quadrupled. Shortly after this, the Midland Railway built a branch from Royston Junction to the north of the station as part of its plans to reach Bradford and the north, avoiding Leeds. In the end, the Lancashire and Yorkshire Railway gave it running powers and the branch only reached Dewsbury.
It was a large station with four platforms and typical Midland Railway timber buildings although only 2 platforms were used regularly for passenger services. It closed in 1968.
Nearby was the Royston engine shed built in the early 1930s, code 20C, to provide motive power for trains from the large collieries of the area. Most of its allocation was Stanier and WD 2-8-0s plus the ubiquitous Fowler 4F's, but ex LNWR 0-8-0s and LMS Garratts were not unknown.[2]
| Preceding station | Historical railways | Following station | ||
|---|---|---|---|---|
| Cudworth Line closed; station closed |
Midland Railway North Midland Railway |
Sandal and Walton Line exists; station closed | ||
References
edit
 | This article on a railway station in Yorkshire and the Humber is a stub. You can help Wikipedia by expanding it. |