This article needs additional citations for verification. (June 2016) |
Runway safety is concerned with reducing harm that could occur on an aircraft runway. Safety means avoiding incorrect presence (incursion) of aircraft, inappropriate exits (excursion) and use of the wrong runway due to confusion. The runway condition is a runway's current status due to meteorological conditions and air safety.[1]
Definitions of runway accidents
editSeveral terms fall under the flight safety topic of runway safety, including incursion, excursion, and confusion.[2]
Runway incursion
editRunway incursion involves an aircraft, and a second aircraft, vehicle, or person. It is defined by ICAO and the U.S. FAA as "Any occurrence at an aerodrome involving the incorrect presence of an aircraft, vehicle or person on the protected area of a surface designated for the landing and take off of aircraft."[3][4]
Runway excursion
editRunway excursion is an incident involving only a single aircraft, where it makes an inappropriate exit from the runway. This can happen because of pilot error, poor weather, or a fault with the aircraft.[5] A runway overrun is a type of excursion where the aircraft is unable to stop before the end of the runway.
Runway excursion is the most frequent type of landing accident, slightly ahead of runway incursion.[6] For runway accidents recorded between 1995 and 2007, 96% were of the 'excursion' type.[6]
Confusion
editRunway confusion is when a single aircraft uses the wrong runway, or a taxiway, for takeoff or landing.[7] Runway confusions are considered a subset of runway incursions. Three major factors that increase the risk of runway confusion include airport complexity, close proximity of runway thresholds, and joint use of a runway as a taxiway.[8] Examples of runway confusion incidents include Singapore Airlines Flight 006, Comair Flight 5191 and Air Canada Flight 759.
Monitoring of runway safety
editThe U.S. FAA publishes an annual report on runway safety issues, available from the FAA website.[4][9][10] New systems designed to improve runway safety, such as Airport Movement Area Safety System (AMASS) and Runway Awareness and Advisory System (RAAS), are discussed in the report. AMASS narrowly prevented a serious collision in the 2007 San Francisco International Airport runway incursion.
In the 1990s, the U.S. FAA conducted a study about a civilian version of 3D military thrust vectoring to prevent jetliner catastrophes [11]
Some instruments for runway safety include ILS, LLWAS, Microwave landing system, Transponder landing system, as well as Runway Awareness and Advisory System.
Meteorological conditions
editThe "runway condition" is a runway's current status in relation to current meteorological conditions and air safety.
- Dry: the surface of the runway is clear of water, snow or ice.
- Damp: change of color on the surface due to moisture.
- Wet: the surface of the runway is soaked but there are no significant patches of standing water.
- Water patches: patches of standing water are visible.
- Flooded: there is extensive standing water.
According to the JAR definition, a runway with water patches or that is flooded is considered to be contaminated.
Takeoff and Landing Performance Assessment (TALPA) was introduced in 2016, whereby airport operators report Runway Condition Codes (RWYCC) for take-off and landing.
See also
editReferences
edit- ^ "Runway Safety". NBAA - National Business Aviation Association. Retrieved 2023-07-04.
- ^ "Runway Safety". www.iata.org. Retrieved 2023-07-04.
- ^ "FAA - Office of Runway Safety - Runway Safety Home". Archived from the original on 2007-07-13. Retrieved 2007-07-13. FAA Runway Safety webpage, Retrieved 2008-12-14.
- ^ a b FAA Runway Safety, Retrieved 2009-04-02
- ^ "Runway excursion". Federal Aviation Administration. Retrieved February 6, 2020.
- ^ a b "Runway excursion Flight Safety Foundation" FlightGlobal.com, Retrieved 2008-12-14.
- ^ http://www.flightglobal.com/articles/2008/03/14/222239/comment-safety-excursions.html "Safety Excursions", FlightGlobal.com, Retrieved 2008-12-15.
- ^ "Chapter 14: Airport Operations". Pilot's Handbook of Aeronautical Knowledge (FAA-H-8083-25C ed.). Federal Aviation Administration. 2023-07-17. p. 32.
- ^ Various runway safety reports
- ^ Runway Safety Statistics
- ^ “Multiaxis Thrust Vectoring Flight Control Vs Catastrophic Failure Prevention”, Reports to U.S. Dept. of Transportation/FAA, Technical Center, ACD-210, FAA X88/0/6FA/921000/4104/T1706D, FAA Res. Benjamin Gal-Or, Grant-Award No: 94-G-24, CFDA, No. 20.108, Dec. 26, 1994; "Vectored Propulsion, Supermanoeuvreability, and Robot Aircraft", by Benjamin Gal-Or, Springer Verlag, 1990, ISBN 0-387-97161-0, 3-540-97161-0.