Wikipedia

S-layer

An S-layer (surface layer) is a part of the cell envelope found in almost all archaea, as well as in many types of bacteria.[1][2] The S-layers of both archaea and bacteria consists of a monomolecular layer composed of only one (or, in a few cases, two) identical proteins or glycoproteins.[3] This structure is built via self-assembly and encloses the whole cell surface. Thus, the S-layer protein can represent up to 15% of the whole protein content of a cell.[4] S-layer proteins are poorly conserved or not conserved at all, and can differ markedly even between related species. Depending on species, the S-layers have a thickness between 5 and 25 nm and possess identical pores 2–8 nm in diameter.[5]

The terminology “S-layer” was used the first time in 1976.[6] The general use was accepted at the "First International Workshop on Crystalline Bacterial Cell Surface Layers, Vienna (Austria)" in 1984, and in the year 1987 S-layers were defined at the European Molecular Biology Organization Workshop on “Crystalline Bacterial Cell Surface Layers”, Vienna as “Two-dimensional arrays of proteinaceous subunits forming surface layers on prokaryotic cells” (see "Preface", page VI in Sleytr "et al. 1988"[7]). For a brief summary on the history of S-layer research see "References". [2][8]

Location of S-layers

edit
 
Schematic illustration of the supramolecular architecture of the major classes of prokaryotic cell envelopes containing surface (S) layers. S-layers in archaea with glycoprotein lattices as exclusive wall component are composed either of mushroom-like subunits with pillar-like, hydrophobic trans-membrane domains (a), or lipid-modified glycoprotein subunits (b). Individual S-layers can be composed of glycoproteins possessing both types of membrane anchoring mechanisms. Few archaea possess a rigid wall layer (e.g. pseudomurein in methanogenic organisms) as intermediate layer between the plasma membrane and the S-layer (c). In Gram-positive bacteria (d) the S-layer (glyco)proteins are bound to the rigid peptidoglycan-containing layer via secondary cell wall polymers. In Gram-negative bacteria (e) the S-layer is closely associated with the lipopolysaccharide of the outer membrane. Figure and figure legend were copied from Sleytr et al. 2014,[2] which is available under a Creative Commons Attribution 3.0 International (CC BY 3.0) licence  .
  • In Gram-negative bacteria, S-layers are associated to the lipopolysaccharides via ionic, carbohydrate–carbohydrate, protein–carbohydrate interactions and/or protein–protein interactions.[2]
  • In Gram-positive bacteria whose S-layers often contain surface layer homology (SLH) domains, the binding occurs to the peptidoglycan and to a secondary cell wall polymer (e.g., teichoic acids). In the absence of SLH domains, the binding occurs via electrostatic interactions between the positively charged N-terminus of the S-layer protein and a negatively charged secondary cell wall polymer. In Lactobacilli the binding domain may be located at the C-terminus.[2]
  • In Gram-negative archaea, S-layer proteins possess a hydrophobic anchor that is associated with the underlying lipid membrane.[1][2]
  • In Gram-positive archaea, the S-layer proteins bind to pseudomurein or to methanochondroitin.[1][2]

Biological functions of the S-layer

edit

For many bacteria, the S-layer represents the outermost interaction zone with their respective environment.[9][2] Its functions are very diverse and vary from species to species. In many archaeal species the S-layer is the only cell wall component and, therefore, is important for mechanical and osmotic stabilization. The S-layer is considered to be porous, which contributes to many of its functions.[10] Additional functions associated with S-layers include:

  • protection against bacteriophages, Bdellovibrios, and phagocytosis
  • resistance against low pH
  • barrier against high-molecular-weight substances (e.g., lytic enzymes)
  • adhesion (for glycosylated S-layers)
  • stabilization of the membrane (e.g. the SDBC in Deinococcus radiodurans) [11][12]
  • resistance against electromagnetic stress (e.g. ionizing radiations and high temperatures) [11][12]
  • provision of adhesion sites for exoproteins
  • provision of a periplasmic compartment in Gram-positive prokaryotes together with the peptidoglycan and the cytoplasmic membranes
  • anti-fouling properties[13]
  • biomineralization[14][15][16]
  • molecular sieve and barrier function[17][18]

A great example of a bacterium which utilizes the biological functions of the S-layer is Clostridioides difficile. In C. difficile, the S-layer has helped with biofilm formation, host cell adhesion, and immunomodulation through cell signaling of the host response.[19]

S-layer structure

edit

While ubiquitous among Archaea, and common in bacteria, the S-layers of diverse organisms have unique structural properties, including symmetry and unit cell dimensions, due to fundamental differences in their constituent building blocks.[20] Sequence analyses of S-layer proteins have predicted that S-layer proteins have sizes of 40-200 kDa and may be composed of multiple domains some of which may be structurally related. Since the first evidence of a macromolecular array on a bacterial cell wall fragment in the 1950s[21] S-layer structure has been investigated extensively by electron microscopy and medium resolution images of S-layers from these analyses has provided useful information on overall S-layer morphology. High-resolution structures of an archaeal S-layer protein (MA0829 from Methanosarcina acetivorans C2A) of the Methanosarcinales S-layer Tile Protein family and a bacterial S-layer protein (SbsB), from Geobacillus stearothermophilus PV72, have recently been determined by X-ray crystallography.[22][23] In contrast with existing crystal structures, which have represented individual domains of S-layer proteins or minor proteinaceous components of the S-layer, the MA0829 and SbsB structures have allowed high resolution models of the M. acetivorans and G. stearothermophilus S-layers to be proposed. These models exhibit hexagonal (p6) and oblique (p2) symmetry, for M. acetivorans and G. stearothermophilus S-layers, respectively, and their molecular features, including dimensions and porosity, are in good agreement with data from electron microscopy studies of archaeal and bacterial S-layers.[6]

In general, S-layers exhibit either oblique (p1, p2), square (p4) or hexagonal (p3, p6) lattice symmetry. Depending on the lattice symmetry, each morphological unit of the S-layer is composed of one (p1), two (p2), three (p3), four (p4), or six (p6) identical protein subunits. The center-to-center spacing (or unit cell dimensions) between these subunits range from 4 to 35 nm.[2]

Self-assembly

edit

In vivo assembly

edit

Assembly of a highly ordered coherent monomolecular S-layer array on a growing cell surface requires a continuous synthesis of a surplus of S-layer proteins and their translocation to sites of lattice growth.[24] Moreover, information concerning this dynamic process were obtained from reconstitution experiments with isolated S-layer subunits on cell surfaces from which they had been removed (homologous reattachment) or on those of other organisms (heterologous reattachment).[25]

In vitro assembly

edit

S-layer proteins have the natural capability to self-assemble into regular monomolecular arrays in solution and at interfaces, such as solid supports, the air-water interface, lipid films, liposomes, emulsomes, nanocapsules, nanoparticles or micro beads.[2][26] S-layer crystal growth follows a non-classical pathway in which a final refolding step of the S-layer protein is part of the lattice formation.[27][28]

Application

edit

Native S-layer proteins have already been used three decades ago in the development of biosensors and ultrafiltration membranes. Subsequently, S-layer fusion proteins with specific functional domains (e.g. enzymes, ligands, mimotopes, antibodies or antigens) allowed to investigate completely new strategies for functionalizing surfaces in the life sciences, such as in the development of novel affinity matrices, mucosal vaccines, biocompatible surfaces, micro carriers and encapsulation systems, or in the material sciences as templates for biomineralization.[2][29][30][31]

References

edit
  1. ^ a b c Albers SV, Meyer BH (2011). "The archaeal cell envelope". Nature Reviews Microbiology. 9 (6): 414–426. doi:10.1038/nrmicro2576. PMID 21572458. S2CID 10297797.
  2. ^ a b c d e f g h i j k Sleytr UB, Schuster B, Egelseer EM, Pum D (2014). "S-layers: Principles and Applications". FEMS Microbiology Reviews. 38 (5): 823–864. doi:10.1111/1574-6976.12063. PMC 4232325. PMID 24483139.
  3. ^ Rodrigues-Oliveira, Thiago; Belmok, Aline; Vasconcellos, Deborah; Schuster, Bernhard; Kyaw, Cynthia M. (2017-12-22). "Archaeal S-Layers: Overview and Current State of the Art". Frontiers in Microbiology. 8: 2597. doi:10.3389/fmicb.2017.02597. ISSN 1664-302X. PMC 5744192. PMID 29312266.
  4. ^ Sleytr U, Messner P, Pum D, Sára M (1993). "Crystalline bacterial cell surface layers". Mol. Microbiol. 10 (5): 911–6. doi:10.1111/j.1365-2958.1993.tb00962.x. PMID 7934867. S2CID 86119414.
  5. ^ Sleytr U, Bayley H, Sára M, Breitwieser A, Küpcü S, Mader C, Weigert S, Unger F, Messner P, Jahn-Schmid B, Schuster B, Pum D, Douglas K, Clark N, Moore J, Winningham T, Levy S, Frithsen I, Pankovc J, Beale P, Gillis H, Choutov D, Martin K (1997). "Applications of S-layers". FEMS Microbiol. Rev. 20 (1–2): 151–75. doi:10.1016/S0168-6445(97)00044-2. PMID 9276930.
  6. ^ a b Sleytr UB (1976). "Self-assembly of the hexagonally and tetragonally arranged subunits of bacterial surface layers and their reattachment to cell walls". J. Ultrastruct. Res. 55 (3): 360–367. doi:10.1016/S0022-5320(76)80093-7. PMID 6800.
  7. ^ Sleytr UB, Messner P, Pum D, Sára M (1988). Sleytr UB, Messner P, Pum D, Sára M (eds.). Crystalline Bacterial Cell Surface Layers. Berlin: Springer. doi:10.1007/978-3-642-73537-0. ISBN 978-3-540-19082-0. S2CID 20244135.
  8. ^ Sleytr UB (2016). Curiosity and Passion for Science and Art. Series in Structural Biology. Vol. 7. Singapore: World Scientific Publishing. doi:10.1142/10084. ISBN 978-981-3141-81-0.
  9. ^ Sleytr, UB; Beveridge, TJ (1999). "Bacterial S-layers". Trends Microbiol. 7 (6): 253–260. doi:10.1016/s0966-842x(99)01513-9. PMID 10366863.
  10. ^ Pfeifer, Kevin; Ehmoser, Eva-Kathrin; Rittmann, Simon K.-M. R.; Schleper, Christa; Pum, Dietmar; Sleytr, Uwe B.; Schuster, Bernhard (2022-07-21). "Isolation and Characterization of Cell Envelope Fragments Comprising Archaeal S-Layer Proteins". Nanomaterials. 12 (14): 2502. doi:10.3390/nano12142502. ISSN 2079-4991. PMC 9320373. PMID 35889727.
  11. ^ a b Farci D, Slavov C, Tramontano E, Piano D (2016). "The S-layer Protein DR_2577 Binds Deinoxanthin and under Desiccation Conditions Protects against UV-Radiation in Deinococcus radiodurans". Frontiers in Microbiology. 7: 155. doi:10.3389/fmicb.2016.00155. PMC 4754619. PMID 26909071.
  12. ^ a b Farci D, Slavov C, Piano D (2018). "Coexisting properties of thermostability and ultraviolet radiation resistance in the main S-layer complex of Deinococcus radiodurans". Photochem Photobiol Sci. 17 (1): 81–88. Bibcode:2018PcPbS..17...81F. doi:10.1039/c7pp00240h. PMID 29218340.
  13. ^ Rothbauer M, Küpcü S, Sticker D, Sleytr UB, Ertl P (2013). "Exploitation of S-layer Anisotropy: pH-dependent Nanolayer Orientation for Cellular Micropatterning". ACS Nano. 7 (9): 8020–8030. doi:10.1021/nn403198a. PMID 24004386.
  14. ^ Schultze-Lam S, Harauz G, Beveridge TJ (1992). "Participation of a cyanobacterial S layer in fine-grain mineral formation". J. Bacteriol. 174 (24): 7971–7981. doi:10.1128/jb.174.24.7971-7981.1992. PMC 207533. PMID 1459945.
  15. ^ Shenton W, Pum D, Sleytr UB, Mann S (1997). "Synthesis of CdS superlattices using self-assembled bacterial S-layers". Nature. 389 (6651): 585–587. doi:10.1038/39287. S2CID 4317884.
  16. ^ Mertig M, Kirsch R, Pompe W, Engelhardt H (1999). "Fabrication of highly oriented nanocluster arrays by biomolecular templating". Eur. Phys. J. D. 9 (1): 45–48. Bibcode:1999EPJD....9...45M. doi:10.1007/s100530050397. S2CID 120507258.
  17. ^ Sára M, Sleytr, UB (1987). "Production and characteristics of ultrafiltration membranes with uniform pores from two-dimensional arrays of proteins". J. Membr. Sci. 33 (1): 27–49. doi:10.1016/S0376-7388(00)80050-2.
  18. ^ von Kügelgen, Andriko; Cassidy, C. Keith; van Dorst, Sofie; Pagani, Lennart L.; Batters, Christopher; Ford, Zephyr; Löwe, Jan; Alva, Vikram; Stansfeld, Phillip J.; Bharat, Tanmay A. M. (6 June 2024). "Membraneless channels sieve cations in ammonia-oxidizing marine archaea". Nature. 630 (8015): 230–236. doi:10.1038/s41586-024-07462-5. PMC 11153153.
  19. ^ Ormsby, Michael J.; Vaz, Filipa; Kirk, Joseph A.; Barwinska-Sendra, Anna; Hallam, Jennifer C.; Lanzoni-Mangutchi, Paola; Cole, John; Chaudhuri, Roy R.; Salgado, Paula S.; Fagan, Robert P.; Douce, Gillian R. (2023-06-29). "An intact S-layer is advantageous to Clostridioides difficile within the host". PLOS Pathogens. 19 (6): e1011015. doi:10.1371/journal.ppat.1011015. ISSN 1553-7374. PMC 10310040. PMID 37384772.
  20. ^ Pavkov-Keller T, Howorka S, Keller W (2011). "The structure of bacterial S-layer proteins". Molecular Assembly in Natural and Engineered Systems. Progress in Molecular Biology and Translational Science. Vol. 103. pp. 73–130. doi:10.1016/B978-0-12-415906-8.00004-2. ISBN 9780124159068. PMID 21999995. {{cite book}}: |journal= ignored (help)
  21. ^ Houwink, AL (1953). "A macromolecular mono-layer in the cell wall of Spirillum spec". Biochim Biophys Acta. 10 (3): 360–6. doi:10.1016/0006-3002(53)90266-2. PMID 13058992.
  22. ^ Arbing MA, Chan S, Shin A, Phan T, Ahn CJ, Rohlin L, Gunsalus RP (2012). "Structure of the surface layer of the methanogenic archaean Methanosarcina acetivorans". Proc Natl Acad Sci U S A. 109 (29): 11812–7. Bibcode:2012PNAS..10911812A. doi:10.1073/pnas.1120595109. PMC 3406845. PMID 22753492.
  23. ^ Baranova E, Fronzes R, Garcia-Pino A, Van Gerven N, Papapostolou D, Péhau-Arnaudet G, Pardon E, Steyaert J, Howorka S, Remaut H (2012). "SbsB structure and lattice reconstruction unveil Ca2+ triggered S-layer assembly" (PDF). Nature. 487 (7405): 119–22. Bibcode:2012Natur.487..119B. doi:10.1038/nature11155. PMID 22722836. S2CID 4389187.
  24. ^ Fagan RP, Fairweather NF (2014). "Biogenesis and functions of bacterial S-layers" (PDF). Nature Reviews. Microbiology. 12 (3): 211–222. doi:10.1038/nrmicro3213. PMID 24509785. S2CID 24112697.
  25. ^ Sleytr UB (1975). "Heterologous reattachment of regular arrays of glycoproteins on bacterial surfaces". Nature. 257 (5525): 400–402. Bibcode:1975Natur.257..400S. doi:10.1038/257400a0. PMID 241021. S2CID 4298430.
  26. ^ Pum D, Sleytr UB (2014). "Reassembly of S-layer proteins". Nanotechnology. 25 (31): 312001. Bibcode:2014Nanot..25E2001P. doi:10.1088/0957-4484/25/31/312001. PMID 25030207. S2CID 39889746.
  27. ^ Chung S, Shin SH, Bertozzi CR, De Yoreo JJ (2010). "Self-catalyzed growth of S layers via an amorphous-to-crystalline transition limited by folding kinetics". Proc. Natl. Acad. Sci. USA. 107 (38): 16536–16541. Bibcode:2010PNAS..10716536C. doi:10.1073/pnas.1008280107. PMC 2944705. PMID 20823255.
  28. ^ Shin SH, Chung S, Sanii B, Comolli LR, Bertozzi CR, De Yoreo JJ (2012). "Direct observation of kinetic traps associated with structural transformations leading to multiple pathways of S-layer assembly". Proc. Natl. Acad. Sci. USA. 109 (32): 12968–12973. Bibcode:2012PNAS..10912968S. doi:10.1073/pnas.1201504109. PMC 3420203. PMID 22822216.
  29. ^ Ilk N, Egelseer EM, Sleytr UB (2011). "S-layer fusion proteins - construction principles and applications". Curr. Opin. Biotechnol. 22 (6): 824–831. doi:10.1016/j.copbio.2011.05.510. PMC 3271365. PMID 21696943.
  30. ^ Schuster B, Sleytr UB (2014). "Biomimetic interfaces based on S-layer proteins, lipid membranes and functional biomolecules". J. R. Soc. Interface. 11 (96): 20140232. doi:10.1098/rsif.2014.0232. PMC 4032536. PMID 24812051.
  31. ^ Schuster B, Sleytr UB (2021). "S-Layer Ultrafiltration Membranes". Membranes. 11 (4): 275. doi:10.3390/membranes11040275. PMC 8068369. PMID 33918014.
Retrieved from "https://en.wikipedia.org/w/index.php?title=S-layer&oldid=1230690452"