Self-assembly based manufacturing refers to a controlled process of using self-assembly and programmable matter to manufacture a product on an industrial scale. In traditional manufacturing and fabrication, there are physical and precision limitations on a workpiece; namely, lower minimal dimension of a workpiece has been a major challenge in modern manufacturing. Engineering self-assembly methods have a significant potentials in overcoming the dimensional limitation of a workpiece. In general, there are three key ingredients in most of self assembly applications: geometry (order), interaction, energy. To improve the efficiency or take shape in self-assembly based manufacturing, it must utilize one or more than one of these three ingredients. This is an emerging market with few examples to date. However, this field shows a strong potential to revolutionize many industrial markets from nanoelectronics to bio-engineering.
Successful processes
edit
Many processes have been successfully developed at laboratory scale and show promise for future expansion into large-scale industrial manufacturing.
- Sequence-specific molecular lithography on single DNA molecules[2]
- Direct molecular assembly on metal surfaces[3]
- Amyloid fibers and selective metal deposition: NM protein fibers[4] have been demonstrated to create nanowires useful in connecting electrodes in laboratory testing.
- Surface-tension-directed-self-assembly of electronic components.
One example is the automated reel to reel fluidic self-assembly machine demonstrated by University of Minnesota researchers.[1] The machine was designed to produce lighting panels using Light-emitting diodes. Assembly was performed at twice the hourly rate of commercially available pick and place machines for SMT placement equipment, 15,000 chips per hour compared to 8,000 chips per hour. At the same time, the self-assembly exceeded the accuracy rate of the pick and place machine as well.
Potential future applications
editFabrication of materials used in most extreme environments, such as space, high altitude, free-fall scenarios, or deep sea.[5] environments have advantageous conditions for allowing increase in self assembly interaction with less or minimum energy consumption. Applications in these environments often require high precision and have more difficulties; however, it has less constraints in existing construction.
References
edit- ^ a b Park, Se‐Chul; Fang, Jun; Biswas, Shantonu; Mozafari, Mahsa; Stauden, Thomas; Jacobs, Heiko O. (September 2014). "A First Implementation of an Automated Reel‐to‐Reel Fluidic Self‐Assembly Machine". Advanced Materials. 26 (34): 5942–5949. doi:10.1002/adma.201401573. PMC 4313688. PMID 24975472.
- ^ Keren, K.; Krueger, M; Gilad, R; Ben-Yoseph, G; Sivan, U; Braun, E (5 July 2002). "Sequence-Specific Molecular Lithography on Single DNA Molecules". Science. 297 (5578): 72–75. Bibcode:2002Sci...297...72K. doi:10.1126/science.1071247. PMID 12098693. S2CID 1915026.
- ^ Comrie, James P. (2011). Molecular Self-Assembly: Advances in Chemistry, Biology and Nanotechnology. Nova. ISBN 9781611224122.[page needed]
- ^ Scheibel, T.; Parthasarathy, R.; Sawicki, G.; Lin, X.-M.; Jaeger, H.; Lindquist, S. L. (15 April 2003). "Conducting nanowires built by controlled self-assembly of amyloid fibers and selective metal deposition". Proceedings of the National Academy of Sciences. 100 (8): 4527–4532. Bibcode:2003PNAS..100.4527S. doi:10.1073/pnas.0431081100. PMC 153589. PMID 12672964.
- ^ Tibbits, Skylar. "The Self-Assembly Line" (PDF). cumincad. Retrieved 16 February 2016.