Severn River railway bridge, Dundee

The Severn River railway bridge is a heritage-listed railway bridge that carries the Main Northern Line across the Severn River at Dundee, Glen Innes Severn, New South Wales, Australia. It was designed by John Whitton in his capacity as Engineer-in-Chief for Railways and built in 1886. It is also known as Severn River Railway Viaduct. The property is owned by Transport Asset Holding Entity, an agency of the Government of New South Wales. It was added to the New South Wales State Heritage Register on 2 April 1999.[1]

Dundee rail bridge over Severn River
Heritage boundaries
Coordinates29°34′55″S 151°48′10″E / 29.5820°S 151.8027°E / -29.5820; 151.8027
CarriesMain North Line
CrossesSevern River
LocaleDundee, Glen Innes Severn, New South Wales, Australia
Other name(s)Severn River Railway Viaduct
OwnerTransport Asset Holding Entity
Characteristics
DesignQueen post truss bridge
MaterialTimber
Longest span12 metres (40 ft)
No. of spans13
Rail characteristics
Track gauge4 ft 8+12 in (1,435 mm) standard gauge
History
Engineering design byJohn Whitton
Construction end1886
Official name
  • Dundee rail bridge over Severn River
  • Severn River Railway Viaduct
TypeState heritage (built)
Designated2 April 1999
Reference no.1033
TypeRailway Bridge/Viaduct
CategoryTransport – Rail
BuildersMain Contractor for the Glen Innes to Tenterfield section
Location
Map

History

edit

When John Whitton, Engineer-in-Chief for Railways 1856–1890, extended the Main North Railway from Muswellbrook to Glen Innes, 1870–1884 it climbed through the highest parts of the Great Dividing Range into the New England Region. Gradients were steep, curves were sharp, there was heavy earthworks and some major iron lattice bridges. It was expensive railway construction.[1]

When the section from Glen Innes to Tenterfield was planned, economies were made, particularly with bridges. They had to be timber, mostly ballast top timber beam bridges but at three locations larger bridges were required, over the Beardy Waters, Severn River and Bluff River.[1]

Whitton, a successful railway engineer from England, chose one of Isambard Kingdom Brunel's timber bridge viaducts built in Cornwall during the 1850s. The model chosen was the St Germans Viaduct, composed of composite deck Queen post trusses, with the bottom chords being large iron rods. Whitton's staff redesigned the trusses to be all timber and the viaducts were built during construction of the Glen Innes to Tenterfield section 1884–86.[1]

The final section to Wallangarra (1888) was mostly easier over plateau country but the crossing of Tenterfield Creek required a large bridge and a timber Queen post truss viaduct was built there also, the fourth between Glen Innes and the Queensland border.[1]

All four viaducts retain their original fabric.[1]

Only two other such timber viaducts were built in this period, the Ingalara Creek railway bridge and the Bredbo River railway bridge on the Bombala railway line.[1]

Description

edit

Located 701.98 kilometres (436.19 mi) from Central station, the Severn River bridge is a 13-span timber truss viaduct; each span is 12 metres (40 ft) centre-to-centre of timber trestles.[1]

The trusses are deck Queen post copied from one of Brunel's Cornish timber bridges (St Germans), built about 30 years earlier.[1]

The condition of the bridge was assessed as fair as at 16 March 2006 due to lack of maintenance since rail services were suspended.[1]

Severn River Bridge

Heritage listing

edit

The Severn River railway bridge was listed on the New South Wales State Heritage Register on 2 April 1999 having satisfied the following criteria.[1]

The place is important in demonstrating the course, or pattern, of cultural or natural history in New South Wales.

The timber Queen post truss viaduct was an economic bridge for the Glen Innes to Wallangarra Railway at a time when the boom years of the 1880s was ending and funding for railway construction was decreasing.[1]

The place is important in demonstrating aesthetic characteristics and/or a high degree of creative or technical achievement in New South Wales.

Despite a degree of inaccessibility, the timber viaducts over the Beardy, Severn and Bluff Rivers are impressive structures within their rural landscapes. At Tenterfield, the adjacent New England Highway provides easy viewing of the fourth such viaduct.[1]

The place has strong or special association with a particular community or cultural group in New South Wales for social, cultural or spiritual reasons.

The Main North Railway made a significant contribution to the development of the New England Region from the time of its construction 1882–88, and the four timber viaducts were important items of the railway's infrastructure.[1]

The place has potential to yield information that will contribute to an understanding of the cultural or natural history of New South Wales.

The timber Queen post deck viaduct was a significant structure in place of the expensive iron lattice bridges preferred by John Whitton. The viaducts were technically sound and durable, having been built from renowned ironbark hardwood.[1]

The place possesses uncommon, rare or endangered aspects of the cultural or natural history of New South Wales.

These four viaducts and the two on the Cooma Line are the only ones of their type built. They are a unique class of railway bridge.[1]

See also

edit

References

edit
  1. ^ a b c d e f g h i j k l m n o p "Dundee rail bridge over Severn River". New South Wales State Heritage Register. Department of Planning & Environment. H01033. Retrieved 2 June 2018.   Text is licensed by State of New South Wales (Department of Planning and Environment) under CC BY 4.0 licence.

Bibliography

edit
  • Rail Infrastructure Corporation (2003). Rail Infrastructure Corporation s.170 Register.

Attribution

edit

  This Wikipedia article was originally based on Dundee rail bridge over Severn River, entry number 01033 in the New South Wales State Heritage Register published by the State of New South Wales (Department of Planning and Environment) 2018 under CC-BY 4.0 licence, accessed on 2 June 2018.