The shooting and bouncing rays (SBR) method in computational electromagnetics was first developed for computation of radar cross section (RCS).[1] Since then, the method has been generalized to be used also for installed antenna performance. The SBR method is an approximate method applied to high frequencies. The method can be implemented for GPU computing, which makes the computation very efficient.
Theory
editThe first step in the SBR method is to use geometrical optics (GO, ray-tracing) for computing equivalent currents, either on metallic structures or on an exit aperture. The scattered field is thereafter computed by integrating these currents using physical optics (PO), by the Kirchhoff's diffraction formula. The current on a perfect electrical conductor (PEC) is related to the incident magnetic field by . This approximation holds best for short wavelengths, and it assumes that the radius of curvature of the scatterer is large compared to the wavelength.[2]
Extending SBR for edge diffraction
editSince the approximation described above assumes that the radius of curvature is large compared to the wavelength, the diffraction from edges needs to be handled separately. The SBR method can be extended with physical theory of diffraction (PTD) in order to include edge diffraction in the model.
Implementation in commercial software
editThe SBR method is implemented in the following commercial codes:
- Altair Feko (method there known as RL-GO - Ray Launching Geometrical Optics)
- CST Microwave Studio, Asymptotic Solver
- Ansys HFSS SBR+, previously Delcross Savant
- XGTD
See also
editReferences
edit- ^ Ling, Hao; et al. (1989). "Shooting and bouncing rays: calculating the RCS of an arbitrarily shaped cavity". IEEE Transactions on Antennas and Propagation. 37 (2): 194. Bibcode:1989ITAP...37..194L. doi:10.1109/8.18706.
- ^ Kristensson, Gerhard (2016). Scattering of electromagnetic waves by obstacles. Scitech. p. 295. ISBN 978-1-61353-222-5.