Sodium amalgam, with the common formula Na(Hg), is an alloy of mercury and sodium. The term amalgam is used for alloys, intermetallic compounds, and solutions (both solid solutions and liquid solutions) involving mercury as a major component. Sodium amalgams are often used in reactions as strong reducing agents with better handling properties compared to solid sodium. They are less dangerously reactive toward water and in fact are often used as an aqueous suspension.
Sodium amalgam was used as a reagent as early as 1862.[1] A synthesis method was described by J. Alfred Wanklyn in 1866.[2]
Structure and compositions
editNo particular formula is assigned to "sodium amalgam". Na5Hg8 and Na3Hg are well defined compounds. In sodium amalgams, the Hg-Hg distances are expanded to around 5 Å vs. about 3 Å for mercury itself.[3] Usually amalgams are classified on the weight percent of sodium. Amalgams with 2% Na are solids at room temperature, whereas some more dilute amalgams remain liquid.[4]
Preparation
edit| External videos | |
|---|---|
| Demonstration and commentary on the preparation of sodium amalgam | |
 via YouTube | |
 Mixing sodium with mercury (31 December 2018), by NileRed |
Metallic sodium dissolves in mercury exothermically, i.e. with the release of heat, therefore, formation of sodium amalgam is famously dangerous for generating sparks.[5] The process causes localised boiling of the mercury and for this reason the formation is usually conducted in a fume hood and often performed using air-free techniques, such as synthesis under anhydrous liquid paraffin. Sodium amalgam may be prepared in the laboratory by dissolving sodium metal in mercury or the reverse.[6][7][8] Sodium amalgams can be purchased from chemical supply houses.
Uses
editSodium amalgam has been used in organic chemistry as a powerful reducing agent, which is safer to handle than sodium itself. It is used in Emde degradation, and also for reduction of aromatic ketones to hydrols.[9]
A sodium amalgam is used in the design of the high pressure sodium lamp providing sodium to produce the proper color, and mercury to tailor the electrical characteristics of the lamp.
Mercury cell electrolysis
editSodium amalgam is a by-product of chlorine made by mercury cell electrolysis. In this cell, brine (concentrated sodium chloride solution) is electrolysed between a liquid mercury cathode and a titanium or graphite anode. Chlorine is formed at the anode, while sodium formed at the cathode dissolves into the mercury, making sodium amalgam. Normally this sodium amalgam is drawn off and reacted with water in a "decomposer cell" to produce hydrogen gas, concentrated sodium hydroxide solution, and mercury to be recycled through the process. In principle, all the mercury should be completely recycled, but inevitably a small portion goes missing. Because of concerns about this mercury escaping into the environment, the mercury cell process is generally being replaced by plants which use a less toxic cathode.
References
edit- ^ Atkinson, E. (1862). "XLI. Chemical notices from foreign journals". The London, Edinburgh, and Dublin Philosophical Magazine and Journal of Science. 24 (161): 305–311. doi:10.1080/14786446208643359.
- ^ Wanklyn, J. Alfred (1866). "XII.—On a new method of forming organo-metallic bodies". J. Chem. Soc. 19: 128–130. doi:10.1039/JS8661900128.
- ^ Greenwood, Norman N.; Earnshaw, Alan (1997). Chemistry of the Elements (2nd ed.). Butterworth-Heinemann. ISBN 978-0-08-037941-8.
- ^ Keith R. Buszek "Sodium Amalgam" in Encyclopedia of Reagents for Organic Synthesis, 2001, John Wiley. doi:10.1002/047084289X.rs040
- ^ W.4r B. Renfrow Jr and C. R. Hauser (1993). "Sodium triphenylmethyl". Organic Syntheses
{{cite journal}}: CS1 maint: numeric names: authors list (link); Collected Volumes, vol. 2, p. 607. - ^ 3% Na in Hg: Babcock, S. H.; Lankelma, H. P.; Vopicka, E. (2007). "Sodium Amalgam". Inorganic Syntheses. Vol. 1. pp. 10–11. doi:10.1002/9780470132326.ch4. ISBN 978-0-470-13232-6.
{{cite book}}:|journal=ignored (help) - ^ see the notes in Richard N. McDonald and Charles E. Reineke (1988). "trans-3,5-Cyclohexadiene-1,2-dicarboxylic acid". Organic Syntheses; Collected Volumes, vol. 6, p. 461.
- ^ Procedure for making Na(Hg) by addition of Na to Hg: Tony C. T. Chang, Myron Rosenblum, and Nancy Simms (1993). "Vinylation of Enolates with a Vinyl Cation Equivalent". Organic Syntheses
{{cite journal}}: CS1 maint: multiple names: authors list (link); Collected Volumes, vol. 8, p. 479. - ^ Bachmann, W. E. (February 1933). "The Mechanism of Reduction by Sodium Amalgam and Alcohol. I. The Reduction of Aromatic Ketones to Hydrols". Journal of the American Chemical Society. 55 (2): 770–774. doi:10.1021/ja01329a051. ISSN 0002-7863.
External links
edit- Oxford MSDS Archived 2011-12-17 at the Wayback Machine