Wikipedia

South African Class 8C 4-8-0

The South African Railways Class 8C 4-8-0 of 1903 was a steam locomotive from the pre-Union era in Transvaal Colony.

CSAR Class 8-L3 4-8-0
South African Classes 8C & 8CW 4-8-0
CSAR Class 8-L3 483, SAR Class 8C 1174, c. 1910
Type and origin
♠ Original locomotive, as built
♥ Superheated, outside admission valves
♣ Superheated, inside admission valves, Class 8CW
Power typeSteam
DesignerCape Government Railways
(H.M. Beatty)
BuilderNorth British Locomotive Company
Serial number15803-15832
ModelCGR 8th Class (4-8-0)
Build date1903
Total produced30
Specifications
Configuration:
​
 • Whyte4-8-0 (Mastodon)
 • UIC♠ 2'Dn2 - ♥♣ 2'Dh2
Driver2nd coupled axle
Gauge3 ft 6 in (1,067 mm) Cape gauge
Leading dia.28+1⁄2 in (724 mm)
Coupled dia.48 in (1,219 mm)
Tender wheels33+1⁄2 in (851 mm) as built
34 in (864 mm) retyred
Wheelbase46 ft 10+1⁄2 in (14,288 mm) ​
 • Engine23 ft 3 in (7,087 mm)
 • Leading6 ft (1,829 mm)
 • Coupled13 ft 6 in (4,115 mm)
 • Tender14 ft 7 in (4,445 mm)
 • Tender bogie4 ft 7 in (1,397 mm)
Length:
​
 • Over couplers54 ft 5 in (16,586 mm)
Height♠ 12 ft 10 in (3,912 mm)
♥♣ 12 ft 8 in (3,861 mm)
Frame typeBar
Axle load♠ 11 LT 17 cwt (12,040 kg)
♥ 12 LT (12,190 kg)
♣ 12 LT 11 cwt (12,750 kg) ​
 • Leading♠ 12 LT 5 cwt (12,450 kg)
♥♣ 12 LT 15 cwt (12,950 kg)
 • Coupled♥ 12 LT (12,190 kg)
 • 1st coupled♠ 11 LT 11 cwt (11,740 kg)
♣ 11 LT 18 cwt (12,090 kg)
 • 2nd coupled♠ 11 LT 17 cwt (12,040 kg)
♣ 12 LT 11 cwt (12,750 kg)
 • 3rd coupled♠ 11 LT 11 cwt (11,740 kg)
♣ 11 LT 19 cwt (12,140 kg)
 • 4th coupled♠ 11 LT 13 cwt (11,840 kg)
♣ 11 LT 18 cwt (12,090 kg)
 • Tender bogieBogie 1: 18 LT 4 cwt (18,490 kg)
Bogie 2: 19 LT 8 cwt (19,710 kg)
 • Tender axle9 LT 14 cwt (9,856 kg)
Adhesive weight♠ 46 LT 12 cwt (47,350 kg)
♥ 48 LT (48,770 kg)
♣ 48 LT 6 cwt (49,080 kg)
Loco weight♠ 58 LT 17 cwt (59,790 kg)
♥ 60 LT 15 cwt (61,720 kg)
♣ 61 LT 1 cwt (62,030 kg)
Tender weight37 LT 12 cwt (38,200 kg)
Total weight♠ 96 LT 9 cwt (98,000 kg)
♥ 98 LT 7 cwt (99,930 kg)
♣ 98 LT 13 cwt (100,200 kg)
Tender typeXF (2-axle bogies)
XC, XC1, XD, XE, XE1, XF, XF1, XF2, XJ, XM, XM1, XM2, XM3 permitted
Fuel typeCoal
Fuel capacity6 LT (6.1 t)
Water cap.3,000 imp gal (13,600 L)
Firebox:​
 • TypeRound-top
 • Grate area♠♥♣ 21 sq ft (2.0 m2)
Boiler:
​
 • Pitch♠ 7 ft (2,134 mm)
♥♣ 7 ft 1 in (2,159 mm)
 • Diameter♠♥♣ 5 ft (1,524 mm)
 • Tube plates♠ 11 ft 1⁄2 in (3,366 mm)
♥♣ 11 ft 3⁄8 in (3,362 mm)
 • Small tubes♠ 205: 2 in (51 mm)
♥♣ 115: 2 in (51 mm)
 • Large tubes♥♣ 18: 5+1⁄2 in (140 mm)
Boiler pressure180 psi (1,241 kPa)
Safety valveRamsbottom
Heating surface:​
 • Firebox♠ 130 sq ft (12 m2)
♥♣ 131 sq ft (12.2 m2)
 • Tubes♠ 1,184 sq ft (110.0 m2)
♥♣ 950 sq ft (88 m2)
 • Total surface♠ 1,314 sq ft (122.1 m2)
♥♣ 1,081 sq ft (100.4 m2)
Superheater:
​
 • Heating area♥♣ 214 sq ft (19.9 m2)
CylindersTwo
Cylinder size♠ 18+1⁄2 in (470 mm) bore
♥ 19 in (483 mm) bore
♣ 20 in (508 mm) bore
♠♥♣ 24 in (610 mm) stroke
Valve gearStephenson
Valve type♠ Slide
♥♣ Piston
CouplersJohnston link-and-pin
AAR knuckle (1930s)
Performance figures
Tractive effort♠ 23,100 lbf (103 kN) @ 75%
♥ 24,370 lbf (108.4 kN) @ 75%
♣ 27,000 lbf (120 kN) @ 75%
Career
OperatorsCentral South African Railways
South African Railways
ClassCSAR Class 8-L3
SAR Classes 8C & 8CW
Number in class30
NumbersCSAR 471-500, SAR 1162-1191
Delivered1903
First run1903
Withdrawn1972
The leading coupled axle had flangeless wheels

In 1903, soon after the establishment of the Central South African Railways, a second batch of thirty Cape 8th Class 4-8-0 Mastodon steam locomotives were ordered and placed in service as the Class 8-L3, immediately following upon a previous order in that same year for a variation on the same locomotive type. In 1912, when they were assimilated into the South African Railways, they were renumbered and designated Class 8C.[1][2][3]

Manufacturer

edit

Upon the establishment of the Central South African Railways (CSAR) in July 1902, soon after the end of the Second Boer War, Chief Locomotive Superintendent P.A. Hyde became the custodian of a mixed bag of locomotives inherited from the Imperial Military Railways (IMR). Apart from those engines which had been acquired new by the IMR during the war, these included locomotives which originated with the Selati Railway, the Nederlandsche Zuid-Afrikaansche Spoorweg-Maatschappij (NZASM), the Pretoria-Pietersburg Railway (PPR) and the Oranje-Vrijstaat Gouwerment Spoorwegen (OVGS).[4]

 
H.M. Beatty

The comparatively small number of serviceable locomotives which were immediately available for service, compounded by the poor condition of many of the original NZASM, PPR, Selati and OVGS locomotives and an expected post-war increase in traffic, led to an order for altogether sixty new steam locomotives. They were built in two versions to the specifications of the 8th Class 4-8-0 Mastodon type which had been designed by H.M. Beatty, the Chief Locomotive Superintendent of the Cape Government Railways (CGR) from 1896 to 1910.[1][3]

Orders were placed with Neilson, Reid and Company in 1903, but while the locomotives were being built, Neilson, Reid amalgamated with Dübs and Company and Sharp, Stewart and Company to form the North British Locomotive Company (NBL). As a result, the thirty locomotives of the second batch, numbered in the range from 471 to 500, were all delivered as built by NBL at the Hyde Park shops of the former Neilson, Reid.[1][3][5]

They differed from the first batch of the same order by not being equipped with Drummond water tubes in the fireboxes. To differentiate them from the Class 8-L1 and the Drummond tube-equipped Class 8-L2, these locomotives were designated the CSAR Class 8-L3. These were the last locomotives to be ordered by the CSAR which were built to the design of another railway.[1][3]

Class 8 sub-classes

edit

When the Union of South Africa was established on 31 May 1910, the three Colonial government railways (CGR, Natal Government Railways and CSAR) were united under a single administration to control and administer the railways, ports and harbours of the Union. Although the South African Railways and Harbours came into existence in 1910, the actual classification and renumbering of all the rolling stock of the three constituent railways were only implemented with effect from 1 January 1912.[2][6]

In 1912, these thirty locomotives were renumbered in the range from 1162 to 1191 and designated Class 8C on the South African Railways (SAR).[2][3][7]

These locomotives, together with the CSAR’s Class 8-L1 and 8-L2 4-8-0 Mastodon locomotives and all the CGR’s 8th Class 2-8-0 Consolidations and 4-8-0 Mastodons, were grouped into ten different sub-classes by the SAR. The 4-8-0 locomotives became SAR Classes 8 and 8A to 8F and the 2-8-0 locomotives became Classes 8X to 8Z.[8]

Modification

edit

During A.G. Watson’s term as the Chief Mechanical Engineer of the SAR from 1929 to 1936, many of the Class 8 to Class 8F locomotives were equipped with superheated boilers, larger bore cylinders and either inside or outside admission piston valves. The outside admission valve locomotives had their cylinder bore increased from 18+1⁄2 inches (470 millimetres) to 19 inches (483 millimetres) and retained their existing SAR classifications, while the inside admission valve locomotives had their cylinder bore increased to 20 inches (508 millimetres) and were reclassified by having a "W" suffix added to their existing SAR classification letters.[3][8]

Of the Class 8C locomotives, seven were equipped with superheating, 19 inches (483 millimetres) bore cylinders and outside admission piston valves while retaining their Class 8C classification.[8]

Five locomotives were equipped with superheating, 20 inches (508 millimetres) bore cylinders and inside admission piston valves, and were reclassified to Class 8CW.[8]

Service

edit

In SAR service, the 4-8-0 Class 8 family of locomotives worked on every system in the country and, in the 1920s, became the mainstay of motive power on many branch lines. Their final days were spent in shunting service. They were all withdrawn from service by 1972.[3]

Works numbers

edit

The Class 8C and 8CW works numbers, renumbering and superheating modifications are listed in the table.[2][5][8]

Illustration

edit

References

edit
 
Wikimedia Commons has media related to South African Class 8C 4-8-0.
  1. ^ a b c d Holland, D.F. (1971). Steam Locomotives of the South African Railways. Vol. 1: 1859–1910 (1st ed.). Newton Abbott, England: David & Charles. p. 128. ISBN 978-0-7153-5382-0.
  2. ^ a b c d Classification of S.A.R. Engines with Renumbering Lists, issued by the Chief Mechanical Engineer’s Office, Pretoria, January 1912, pp. 8, 12, 15, 41-42 (Reprinted in April 1987 by SATS Museum, R.3125-6/9/11-1000)
  3. ^ a b c d e f g Paxton, Leith; Bourne, David (1985). Locomotives of the South African Railways (1st ed.). Cape Town: Struik. pp. 48–49. ISBN 0869772112.
  4. ^ Durrant, AE (1989). Twilight of South African Steam (1st ed.). Newton Abbott: David & Charles. p. 8. ISBN 0715386387.
  5. ^ a b North British Locomotive Company works list, compiled by Austrian locomotive historian Bernhard Schmeiser
  6. ^ The South African Railways - Historical Survey. Editor George Hart, Publisher Bill Hart, Sponsored by Dorbyl Ltd., Published c. 1978, p. 25.
  7. ^ Holland, D. F. (1972). Steam Locomotives of the South African Railways. Vol. 2: 1910-1955 (1st ed.). Newton Abbott, England: David & Charles. p. 139. ISBN 978-0-7153-5427-8.
  8. ^ a b c d e South African Railways and Harbours Locomotive Diagram Book, 2’0” & 3’6” Gauge Steam Locomotives, 15 August 1941, as amended
Retrieved from "https://en.wikipedia.org/w/index.php?title=South_African_Class_8C_4-8-0&oldid=1238565060"