In decision theory and estimation theory, Stein's example (also known as Stein's phenomenon or Stein's paradox) is the observation that when three or more parameters are estimated simultaneously, there exist combined estimators more accurate on average (that is, having lower expected mean squared error) than any method that handles the parameters separately. It is named after Charles Stein of Stanford University, who discovered the phenomenon in 1955.[1]

An intuitive explanation is that optimizing for the mean-squared error of a combined estimator is not the same as optimizing for the errors of separate estimators of the individual parameters. In practical terms, if the combined error is in fact of interest, then a combined estimator should be used, even if the underlying parameters are independent. If one is instead interested in estimating an individual parameter, then using a combined estimator does not help and is in fact worse.

Formal statement

edit

The following is the simplest form of the paradox, the special case in which the number of observations is equal to the number of parameters to be estimated. Let   be a vector consisting of   unknown parameters. To estimate these parameters, a single measurement   is performed for each parameter  , resulting in a vector   of length  . Suppose the measurements are known to be independent, Gaussian random variables, with mean   and variance 1, i.e.,  . Thus, each parameter is estimated using a single noisy measurement, and each measurement is equally inaccurate.

Under these conditions, it is intuitive and common to use each measurement as an estimate of its corresponding parameter. This so-called "ordinary" decision rule can be written as  , which is the maximum likelihood estimator (MLE). The quality of such an estimator is measured by its risk function. A commonly used risk function is the mean squared error, defined as  . Surprisingly, it turns out that the "ordinary" decision rule is suboptimal (inadmissible) in terms of mean squared error when  . In other words, in the setting discussed here, there exist alternative estimators which always achieve lower mean squared error, no matter what the value of   is. For a given   one could obviously define a perfect "estimator" which is always just  , but this estimator would be bad for other values of  .

The estimators of Stein's paradox are, for a given  , better than the "ordinary" decision rule   for some   but necessarily worse for others. It is only on average that they are better. More accurately, an estimator   is said to dominate another estimator   if, for all values of  , the risk of   is lower than, or equal to, the risk of  , and if the inequality is strict for some  . An estimator is said to be admissible if no other estimator dominates it, otherwise it is inadmissible. Thus, Stein's example can be simply stated as follows: The "ordinary" decision rule of the mean of a multivariate Gaussian distribution is inadmissible under mean squared error risk.

Many simple, practical estimators achieve better performance than the "ordinary" decision rule. The best-known example is the James–Stein estimator, which shrinks   towards a particular point (such as the origin) by an amount inversely proportional to the distance of   from that point. For a sketch of the proof of this result, see Proof of Stein's example. An alternative proof is due to Larry Brown: he proved that the ordinary estimator for an  -dimensional multivariate normal mean vector is admissible if and only if the   -dimensional Brownian motion is recurrent.[2] Since the Brownian motion is not recurrent for  , the MLE is not admissible for  .

An intuitive explanation

edit

For any particular value of   the new estimator will improve at least one of the individual mean square errors   This is not hard − for instance, if   is between −1 and 1, and  , then an estimator that linearly shrinks   towards 0 by 0.5 (i.e.,  , soft thresholding with threshold  ) will have a lower mean square error than   itself. But there are other values of   for which this estimator is worse than   itself. The trick of the Stein estimator, and others that yield the Stein paradox, is that they adjust the shift in such a way that there is always (for any   vector) at least one   whose mean square error is improved, and its improvement more than compensates for any degradation in mean square error that might occur for another  . The trouble is that, without knowing  , you don't know which of the   mean square errors are improved, so you can't use the Stein estimator only for those parameters.

An example of the above setting occurs in channel estimation in telecommunications, for instance, because different factors affect overall channel performance.

Implications

edit

Stein's example is surprising, since the "ordinary" decision rule is intuitive and commonly used. In fact, numerous methods for estimator construction, including maximum likelihood estimation, best linear unbiased estimation, least squares estimation and optimal equivariant estimation, all result in the "ordinary" estimator. Yet, as discussed above, this estimator is suboptimal.

Example

edit

To demonstrate the unintuitive nature of Stein's example, consider the following real-world example. Suppose we are to estimate three unrelated parameters, such as the US wheat yield for 1993, the number of spectators at the Wimbledon tennis tournament in 2001, and the weight of a randomly chosen candy bar from the supermarket. Suppose we have independent Gaussian measurements of each of these quantities. Stein's example now tells us that we can get a better estimate (on average) for the vector of three parameters by simultaneously using the three unrelated measurements.

At first sight it appears that somehow we get a better estimator for US wheat yield by measuring some other unrelated statistics such as the number of spectators at Wimbledon and the weight of a candy bar. However, we have not obtained a better estimator for US wheat yield by itself, but we have produced an estimator for the vector of the means of all three random variables, which has a reduced total risk. This occurs because the cost of a bad estimate in one component of the vector is compensated by a better estimate in another component. Also, a specific set of the three estimated mean values obtained with the new estimator will not necessarily be better than the ordinary set (the measured values). It is only on average that the new estimator is better.

Sketched proof

edit

The risk function of the decision rule   is

 
 
 

Now consider the decision rule

 

where  . We will show that   is a better decision rule than  . The risk function is

 
 
 

— a quadratic in  . We may simplify the middle term by considering a general "well-behaved" function   and using integration by parts. For  , for any continuously differentiable   growing sufficiently slowly for large   we have:

 
 
 

Therefore,

 

(This result is known as Stein's lemma.) Now, we choose

 

If   met the "well-behaved" condition (it doesn't, but this can be remedied—see below), we would have

 

and so

 
 
 

Then returning to the risk function of  :

 

This quadratic in   is minimized at  , giving

 

which of course satisfies   making   an inadmissible decision rule.

It remains to justify the use of

 

This function is not continuously differentiable, since it is singular at  . However, the function

 

is continuously differentiable, and after following the algebra through and letting  , one obtains the same result.

See also

edit

Notes

edit
  1. ^ Efron, B.; Morris, C. (1977), "Stein's paradox in statistics" (PDF), Scientific American, 236 (5): 119–127, Bibcode:1977SciAm.236e.119E, doi:10.1038/scientificamerican0577-119
  2. ^ Brown, L. D. (1971). "Admissible Estimators, Recurrent Diffusions, and Insoluble Boundary Value Problems". The Annals of Mathematical Statistics. 42 (3): 855–903. doi:10.1214/aoms/1177693318. ISSN 0003-4851.

References

edit