Talk:7.62×39mm

Latest comment: 2 years ago by 188.66.34.192 in topic Add?

Opening heading

edit

I just deleted the mention of hydrostatic shock in the section describing wounding potential, as hydrostatic shock has been thoroughly discredited as a mechanism for causing injury in gunshot wounds. Sbard 00:23, 1 March 2006 (UTC)Reply

Development History

edit

My understanding is that there's a significant debate as to the parentage and development of the cartridge design. That is, there's a tendency for Russian Historians to deny that the 7.92x33mm has much influence in the design, but there's evidence that earlier pre-war german developements like the GeCo round were used as inspiration. So, I'm editing this part of the article slightly, and perhaps an entire section on developement should be added.

Complaint

edit

WHO WROTE THIS? its mostly IGNORENT NONSENSE! so is the M67 tomb below. bookwormizm by someone who obviously has never handled , used or deeply studied the items in question.

(copied from an edit by a user at 64.85.128.209 that placed this inside the section: "An Imperfect Design: M43". -- Mike Wilson 01:34, 24 December 2005 (UTC))Reply

What parts do you consider ignorant? CynicalMe 19:23, 11 June 2006 (UTC)Reply
The comment in question was placed in the article at this time:
19:11, 23 December 2005 (hist) (diff) 7.62 x 39 mm (→An imperfect design: M43)
That was that user's only edit, so I doubt you'll get a response as to what in that "tomb" is "ignorent". scot 01:50, 13 June 2006 (UTC)Reply
So for the sake of clean-up, could we do without this section in the Talk page? CynicalMe 03:08, 13 June 2006 (UTC)Reply

The Yugoslavian M-67 round is flat based and has no air pocket in the nose. Its yawing properties are a function of its center of gravity and ogive shape. The last paragraph is totally unrelated to the M-67. If you wish to discuss other 7.62x39 loads, start as seperate section for miscellaneous loads.69.241.40.207 03:30, 4 March 2007 (UTC)Reply

Many problems...

edit

This article isn't well written at all. Anyway, I deleted part about it being as powerful as a .30-30. Although it does have somewhat similar ballistics (Nothing to brag about) to the .30-30, it doesn't do near as much damage, due to bullet size and the type of bullets a .30-30 usually employs. Think of throwing two baseballs at the same speed, but one happens to be heavier and hurts more.

On the contrary, the 7.62x39mm pushes a 124 grain bullet at about the same velocity that the .30-30 pushes a 150 grain bullet. The energy retention is about the same, the 7.62 making up in aerodynamics what it lacks in bullet mass over the .30-30. You can push a much heavier bullet in the .30-30, but very few people do, as you start to have maximum point blank range issues as the velocity drops off.
  • .30-30 Winchester,150,2300,www.pmcammo.com,PMC loading
  • .30-30 Winchester,150,2100,www.pmcammo.com,PMC loading
  • .30-30 Winchester,150,2300,www.cor-bon.com,Cor-Bon loading
  • .30-30 Winchester,170,2150,www.pmcammo.com,PMC loading
  • 7.62 x 39 mm,100,2300,www.pmcammo.com,PMC loading
  • 7.62 x 39 mm,122,2396,www.wolfammo.com,Wolf commercial load
  • 7.62 x 39 mm,123,2350,www.pmcammo.com,PMC loading
  • 7.62 x 39 mm,125,2320,www.pmcammo.com,PMC loading
  • 7.62 x 39 mm,154,2104,www.wolfammo.com,Wolf commercial load

Given that an SKS is about the same size, weight, and power as a Winchester or Marlin lever action in .30-30, and the SKS is quite a bit cheaper, it has certainly cut into the .30-30's domain as the cheap deer rifle of choice. scot 20:29, 5 June 2006 (UTC)Reply

I still don't believe it has, and it is certainly erroneous- given your own infromation, and it is generally discouraged to use on deer, especially where I live. It is a poor performing round, and I have yet to find a person who considers it .30-30 comparable. Those 200 fps or 20 gr of bullet do a lot, but the most important bit is the flat tips you see most often in lever guns. You say that it is cutting into the .30-30's domain? It has done nothing of the sort. I suggest you take some milk jugs out, or deer, and see what the difference is.

I won't change it, but personal experience tells me that you are incorrect, particularly with the shoddy loads that you find in Wolf ammo. Winchester ammo has always been finicky in my SKS, and Remington isn't much better. Wolf is flawless, but I've only used it on groundhogs.

My point is not that they are equal, but that they do overlap, and both have pros and cons. The short, fat 7.62x39mm is a more efficient case (look what it can do in the 6 mm PPC) and it uses more aerodynamic spitzer bullets, which gives it the edge in external ballistics. The .30-30's oversized case (it was originally loaded with 30 grains of cordite, and the shorter .30 Herrett will generally match its performance with light bullets) allows a far wider range of bullet weights, and the flat point bullets required for lever actions do provide better terminal performance. This means that the 7.62x39mm will shoot a bit flatter, and the .30-30 will hit harder. Which side you or I come down on in terms of the tradeoff isn't relevant, the fact is that a lot of people use the SKS to hunt with, and it does fill the same niche as the .30-30--an inexpensive, lightweight, medium range carbine. The average hunter doesn't grab the milk jugs or Kind & Knox and test out a dozen types of ammunition to determine the estimated penetration and expansion, he just buys a box of whatever hollow points are on sale and uses them. The evidence that the SKS is "displacing" the .30-30 leverl action is anecdotal, what can be said with some confidence is that the 7.62x39mm has become a popular deer hunting cartridge, and the .30-30 is losing ground. scot 15:19, 13 June 2006 (UTC)Reply
It is impossible that the cartridges would have the same power. The two bullets have the same diameter and the same muzzle velocity, yet the .30-30 has in the lighter loads almost 40 grains heavier bullet and heavier loads a 60 grain heavier bullet. That means that the .30-30 will always have more power. Neither cartridge, however, is a sniper rifle cartridge so if you hit anything beyond 200 yards you're either the best shot in the world or really, really, REALLY lucky. VogonFord 03:08, 4 June 2007 (UTC)Reply

'The cartridge was influenced by the late-war German 7.92 mm Kurzdge]] was designed ("Kurz" meaning "short" in German)' this isn't the full truth, the soviets started research on a shorter cartridge in the 1930's; for more info read John Walter's The Evolution of the AK Machine Pistols and Machine Guns from 1945 to Present. Macerator 18:07, 13 August 2006 (UTC)Reply

Muzzle velocity?

edit

In the Specifications section, the muzzle velocity of the 7.62mm bullet is mentioned as being 710 m/s... doesn't the muzzle velocity of the bullet depend on the weapon that fires it? --Ravenstorm 20:03, 1 October 2006 (UTC)Reply

To some degree, yes--and bullet weight, powder type and quantity, bullet material, bore condition, and a myriad other factors (see internal ballistics). Standard barrel length on most 7.62x39mm guns (i.e. the SKS and AK-47, AKM, etc.) is 16 to 20 inches, and the quoted velocity is going to be fairly close for those lengths. The 12" barrel SMG variants (often called "Krinkov" types, similar to the AKS-74U) are going to be significantly less, the RPK a noticable bit more. The AK-47 quotes 710 m/s, and the RPK quots 745 m/s, so that's the span over 16 to 23 inches of barrel length for typical military ball ammunition. scot 20:38, 2 October 2006 (UTC)Reply

I noticed this morning that the muzzle kinetic energy of the 7.62 rounds were improperly calculated so I updated them using the usual formula 1/2 * mass * velocity^2 with the given mass and velocity on the page. These data could be inaccurate of course, but the site should at least be self-consistent. User:SCIENCEftw 10:37, 24 November 2010 (PST) —Preceding unsigned comment added by 24.16.109.253 (talk)

title

edit

i added the wrongtitle template because the article uses x and not ×. one is a letter and the other is a multiplication sign (which is correct) --80.63.213.182 21:28, 5 November 2006 (UTC)Reply

Article renaming

edit

As per the general consensus from the team at Wikiproject: Military History, it would seem that this article really ought to be named "7.62x39", with no spaces- It's even referred to thusly in the body of the article! I thought I'd give people a chance to comment before arbitrarily changing the title, however. --Commander Zulu 07:03, 26 November 2006 (UTC)Reply

Sure, but I did a search for simply "7.62x39" and got this page. But no, there is not suppose to be any spaces. And to be even further correct, you could use proper european metric notation: "7,62x39mm"--using the comma instead of a decimal. This notation appears on many brands of ammo, including, but not limited to Sellier&Bellot.209.114.201.30 20:47, 7 December 2006 (UTC)Reply

I've never seen boxes of this calibre ammo using the comma, and even if some manufacturers do (S&B are based in the Czech Republic, IIRC), standard English usage is for the decimal point... --Commander Zulu 11:02, 10 December 2006 (UTC)Reply

I have a box of S&B 7.62x54R ammo that uses the comma instead of the decimal. If I had the capability to scan it, I would. I will try to find an internet source for this.209.114.201.30 12:35, 13 December 2006 (UTC)Reply

I found it, nevertheless on S&B's website (www.sellier-bellot.cz). Here is a picture: http://www.sellier-bellot.cz/img/boxes/sb33225-kd.jpg (this picture is property of sellier&bellot). I knew I was not mistaken. :) 209.114.201.30 12:40, 13 December 2006 (UTC)Reply

Fair enough- but my point still stands. S&B are a Czech company, and I've never seen Remington, Winchester, PMC, Federal, or even Norinco ammo with "7,62x39" on it. I'm pretty sure the consensus is that, on the English Language Wikipedia, we use English naming conventions- which means decimal points, not commas, in numbers.--Commander Zulu 00:25, 14 December 2006 (UTC)Reply

Oh, don't get me wrong, I agree with that. I felt perhaps it was worth mentioning that some packaging used the "7,62" notation merely as a factoid. I agree that with the English Wikipedia we should use SAE notation as the norm.JasonM45 15:56, 15 December 2006 (UTC)Reply

I've completed the page move. Cheers. -GTBacchus(talk) 05:18, 16 December 2006 (UTC)Reply
No- it was decided some time ago that calibre designations were to be in the AxB (name) format- no spaces, no measurement designators- after all, we don't refer to .303" British or .45" Automatic Colt Pistol, for example. A case could, however, be made for renaming the article "7.62x39 Soviet" or "7.62x39 M43", FWIW. I'm not too fussed as long as it doesn't involve the "mm" or unnecessary spaces. --Commander Zulu 04:25, 27 October 2007 (UTC)Reply

Sources

edit

Just been through the article, standardising its English, cartridge names, etc, and adding fact tags. This article needs a lot of citations from some good sources, because we have mostly decent info in the article (e.g. mild steel being used because it's cheap rather than its supposed armour-piercing capabilities) but no sources to back it up.Geoff B 17:49, 18 March 2007 (UTC)Reply

Claims contrary to ballistics

edit

A rifle bullet is not going to drop below the sight picture at a range shorter than the sight is adjusted to unless it is at point-blank range, in which case the effect is caused by sight offset. Unlike many modern Western designs, this is something AK-pattern guns have little of. This is claimed in the M43 section. Soviet soldiers were probably trained to aim low because infantrymen have a tendency to shoot high and waste ammo. Kensai Max 19:36, 26 March 2007 (UTC)Reply

Ditto. I ran the numbers, and could not come up with any round hitting anywhere near 0 at 300 meters that hit low at 50 meters. This just wasn't realistic. Arthurrh 23:38, 17 July 2007 (UTC)Reply

Bullet diameters?

edit

European and Soviet bloc catridges such as the 7.62x39mm, 7.62x54R, and .303 British use a .310 or so bullet diameter, while US cartridges a .308 bullet diameter in 7.62x51mm. Should this be mentioned in the article? I can probably find a source for this in a reloading manual. scot 02:53, 8 June 2007 (UTC)Reply

If not in this particular article, then in a dedicated article that documents the difference between the actual diameter and the stated diameter of various cartridges. Geoff B 22:33, 3 August 2007 (UTC)Reply
See Caliber#Metric vs Inch Arthurrh 23:37, 3 August 2007 (UTC)Reply

the diameter is 0.311, which any good reloading book will tell you (e.g. lyman 49th edition p.242, hornady 8th edition p.597) — Preceding unsigned comment added by 71.231.42.19 (talk) 07:47, 24 January 2012 (UTC)Reply

Lethality

edit

The cite tags have been on this article for months now over the lethality of the cartrige. Can someone prove or disprove the claims? IIRC Fackler's studies claiming a low damage potential from the round have been refuted by decades of combat usage showing that it is highly effective. There's gotta be sources out there for this. Kensai Max 16:41, 18 October 2007 (UTC)Reply

Subjective claim at best. Fackler claims damage potential approximately equal to 9x19mm Parabellum ball rounds UNLESS a bone (or other inelastic organ) is struck. Survival rates of people actually shot with these two rounds in the United States (even at extremely short ranges), as compared to being shot with other cartridges bears out his basic assertion. By contrast, short range hits with M193 and M855 5.56x45mm ball do more tissue damage, with lower survival rates.

Analysis of combat wounds suffered by US servicemen with 7.62x39mm, 5.56x45mm, 7.62x51mm, and 7.62x54mmR rounds indicate that the 7.62x39mm generally produces the least damaging, most surviveable, most easily healed wounds of the group. The round doesn't normally fragment like the 5.56, it doesn't have the raw horsepower (including weight and length of bullet) of the 7.62x54mmR and 7.62x51mm rounds, and it isn't a particularly fast tumbler -- it tends to produce relatively minor (compared to other combat rifle rounds. . . ANY gunshot wound sucks and can be lethal) through and through wounds when it hits soft tissue.

Don't have the references in front of me right now, but I seem to recall that Fackler actually references the Real World (as opposed to sticking purely with Jello Warrior results) statistics on various caliber hits.

Geodkyt (talk) 16:57, 17 September 2008 (UTC)Reply

Mini-30

edit

Under the hunting section, we might want to mention the Mini-30 as it was introduced for the specific market. 68.116.99.152 (talk) 18:13, 27 December 2007 (UTC)Reply

Minimal recoil?

edit

Its mentioned in the latter part of the article that this calibre has "minimal recoil" and that this is one of the reasons for popularity, but really having shot lots with this calibre, i wouldnt call the recoil minimal, especially if compared to 5,56 nato weapons, which actually have "minimal" or nonexistant recoil compared to 7,62x39 weapons which actually do have a recoil. —Preceding unsigned comment added by 84.231.217.247 (talk) 17:47, 19 September 2008 (UTC)Reply

Hunting

edit

Since I'm completey unsophisticated at wiki editing, could somebody add that: Sturm-Ruger made a limited run of bolt action hunting rifles for this cartridge. CZ (Ceska Zbrojovka) markets their CZ 527 carbine chambered for 7.62x39. Remington imports Zastava's mini Mauser as the Model 799 Bolt action rifle chambered for this cartridge.

References: http://www.303british.com/id47.html http://www.cz-usa.com/product_detail.php?id=15

I would like to add that actual field test(anecdotal)with a 98K Mauser rifle barrel in this caliber has made this my favorite deer rifle. I have taken hog and deer up to 200lb with it. A oblique shot entering below the last full rib completely liquefied the cardiac muscle of a hog. We use strictly HP bullets due to hunting regulations and have found it will even take dangerous game such at 10' plus alligators. Shooting on a range with a bolt action rifle has demonstrated to me that consistent shots are possible out to 300 yd. past this the bullet goes sub-sonic and its trajectory is greatly influenced by environmental factors. As a responsible hunter I would not attempt a shot under 150 yd. with this cartridge. I believe such a shot does not guaranty a clean kill. 209.251.128.98 (talk) 16:31, 11 January 2010 (UTC)Reply

Militiary using

edit

Though 7,62mm had been changed to 5,45mm, russian soldiers prefer to use 7,62mm automats in action, if they can, due to bigger ability of 7,62mm bullets. Military experts explain it by poor characteristics of 7H6 5,45mm cartridges, while new 7H10 cartridges doesn't arrive in army.Ходок (talk) 16:34, 20 February 2010 (UTC)Reply

Article cleanup

edit

I'm going to attempt to change some of the wording to improve the grammar of the article. My goal is to improve the readability of the piece and not take any of the content away. —Preceding unsigned comment added by Jill Orly (talkcontribs) 01:52, 9 October 2010 (UTC)Reply

Requested move 1

edit
The following discussion is an archived discussion of a requested move. Please do not modify it. Subsequent comments should be made in a new section on the talk page. No further edits should be made to this section.

The result of the move request was: page moved. Macr86 (talk) 02:15, 16 January 2011 (UTC)Reply


7.62x39mmAmmo (RPD machine gun) — Article name refers to an unknown , not a common term and , lacks notability. Article name fails "Recognizability" , " Specific-topic naming conventions " and does not respect wp:UCN#Common_names and Wp:UCN#Deciding_on_an_article_title -Paul 19:28, 8 January 2011 (UTC)

  • Oppose all ammunition follows the exact same pattern and a quick search produced a health supply of reliable sources. Besides, the suggested name isn't practical. This ammunition is used with a number of weapons, not just the RPD machine gun. -Labattblueboy (talk) 04:14, 11 January 2011 (UTC)Reply
The above discussion is preserved as an archive of a requested move. Please do not modify it. Subsequent comments should be made in a new section on this talk page. No further edits should be made to this section.

Requested move 2

edit
The following discussion is an archived discussion of a requested move. Please do not modify it. Subsequent comments should be made in a new section on the talk page. No further edits should be made to this section.

The result of the move request was: page moved. Early close under WP:SNOW. The rename this reverses is ridiculous. Andrewa (talk) 21:12, 16 January 2011 (UTC)Reply



Ammo (RPD machine gun)7.62x39mm — Move discussion was closed and page was moved by an inexperienced editor. There was no consensus for a move and in fact the only !vote in the discussion was opposed to a move. Srleffler (talk) 14:20, 16 January 2011 (UTC)Reply

Survey

edit
Feel free to state your position on the renaming proposal by beginning a new line in this section with *'''Support''' or *'''Oppose''', then sign your comment with ~~~~. Since polling is not a substitute for discussion, please explain your reasons, taking into account Wikipedia's policy on article titles.
  • Support. Besides the reasons given in the discussion above, article titles should not be made ambiguous (and disambiguated with a phrase in brackets) when this is not necessary. The title could have been constructed to avoid this. Also, "Ammo" is too casual for a Wikipedia article title. "Ammunition" should be written out in full.--Srleffler (talk) 14:32, 16 January 2011 (UTC)Reply
  • Support. Given that this ammunition is used by far more than just the RPD it makes little sense calling the article "Ammo (RPD machine gun)". In addition "ammo" is unencyclopedic slang. The standard nomenclature for ammunition article names makes a lot more sense.--Toddy1 (talk) 20:27, 16 January 2011 (UTC)Reply

Discussion

edit
Any additional comments:
The above discussion is preserved as an archive of a requested move. Please do not modify it. Subsequent comments should be made in a new section on this talk page. No further edits should be made to this section.
edit

During several automated bot runs the following external link was found to be unavailable. Please check if the link is in fact down and fix or remove it in that case!

--JeffGBot (talk) 20:59, 19 June 2011 (UTC)Reply

List of Firearms

edit

can sombody put a list of firearms that use the 7.62x39mm round at the bottom. Something similar to the list on the 7.62x54mmR page. I'm compileing a list of military firearms and common ammunition for a quick refrence and this would be extremly helpfull. thank you — Preceding unsigned comment added by Macaque21 (talkcontribs) 13:49, 20 September 2011 (UTC)Reply

other names for 7.62x39mm

edit

"Other names for 7.62×39mm

On some occasions, this ammunition is referred to as 7.62 mm Soviet, 7.62 mm Warsaw Pact (or WP) being analogous to 5.56 NATO, or 7.62 mm ComBloc. It was also known in the United States as .30 Short Russian/ComBloc; the "Short" was to distinguish it from the older .30 Russian, which was the 7.62x54mmR.[citation needed]"

I routinely hear people referring to 7.62x39mm ammo simply as “SKS ammo”, “AK ammo” and “AK-47 ammo”. I have even seen boxes of ammo marked as “AK47 rifle ammo”[1]. I have never heard anyone call it 7.62mm Warsaw Pack, 7.62mm WP, 7.62mm ComBloc or .30 Short Russaian/ComBloc. I recommend that we rewrite this section as follows…

The 7.62x39mm ammo is also commonly referred to as "SKS ammo", "AK ammo" and "AK-47 ammo" It is also sometimes referred to as "7.62mm Russian" or "7.62mm Soviet". — Preceding unsigned comment added by 71.22.156.40 (talk) 17:56, 17 May 2012 (UTC)Reply

Diameter

edit

Hey,the diameter of bullet is written as 7.92 mm instead of 7.62mm please make this change..it must be 7.62mm..as the dimension suggests

Siddhesh201038 (talk) 19:14, 20 May 2016 (UTC)Reply


The absolute diameter of the projectile is closer to 7.92mm. The cartridge designation "7.62x39mm," as is true with nearly every other cartridge (see: .38 Special), is nominal and rarely represents the absolute diameter of the projectile 63.234.214.254 (talk) 16:12, 21 November 2016 (UTC)Reply

Accuracy claims

edit

Under "Hunting and sport use," it is claimed that AR-pattern rifles chambered in 7.62x39 are more accurate than Kalashnikov-pattern rifles in the same cartridge. This claim is not backed up by a later citation mentioning the differing components in such an AR-pattern rifle. 63.234.214.254 (talk) 16:09, 21 November 2016 (UTC)Reply

edit

Hello fellow Wikipedians,

I have just modified 2 external links on 7.62×39mm. Please take a moment to review my edit. If you have any questions, or need the bot to ignore the links, or the page altogether, please visit this simple FaQ for additional information. I made the following changes:

When you have finished reviewing my changes, you may follow the instructions on the template below to fix any issues with the URLs.

This message was posted before February 2018. After February 2018, "External links modified" talk page sections are no longer generated or monitored by InternetArchiveBot. No special action is required regarding these talk page notices, other than regular verification using the archive tool instructions below. Editors have permission to delete these "External links modified" talk page sections if they want to de-clutter talk pages, but see the RfC before doing mass systematic removals. This message is updated dynamically through the template {{source check}} (last update: 5 June 2024).

  • If you have discovered URLs which were erroneously considered dead by the bot, you can report them with this tool.
  • If you found an error with any archives or the URLs themselves, you can fix them with this tool.

Cheers.—InternetArchiveBot (Report bug) 08:21, 23 June 2017 (UTC)Reply

Bullet diameter, again

edit

The illustration showing cartridge dimensions in the article lists the bullet diameter as 7.92mm/.312", which, because of that, is repeatedly added to the infobox, but the illustration isn't an official CIP/SAAMI illustration of official CIP/SAAMI dimensions, but user generated (by a WP editor in 2008). And that editor got it wrong. According to Guns & Ammo the official SAAMI bullet diameter is .308"-.310" (".310 minus .002"), and various European sources list the official "type aproved" bullet diameter as 7.85mm (.309"), i.e. squarely in SAAMI territory. The actual bore diameter, measured between the grooves, various wildly between rifle manufacturers, from .308" up to .312" or more, and the recommended bullet diameter in reloading manuals also varies from .308" (like U.S. calibers) to .312" (like .303 British), but we should stick to what the official diameter is. - Tom | Thomas.W talk 12:47, 24 January 2019 (UTC)Reply

I can add that the 7.92mm in the illustration probably is based on the image creator assuming that the 7.62x39mm uses the same bullet diameter as the older 7.62x54mmR cartridge (which uses 7.92mm/.312" bullets, just like the .303 British, which predates it by a couple of years), but it doesn't... - Tom | Thomas.W talk 12:57, 24 January 2019 (UTC)Reply
The G1 diameter was and is 7.92 mm according to the C.I.P. TDCC. G1 is a maximum dimension. That is stated under the drawing. That bullet with diameters somewhat under G1 are produced is rather common and by no means special for this chambering. G1 and the corresponding minimal chamber dimensions are ruled for user safety. The C.I.P. TDCC is a legal binding document for Russians that is not open for discussion for them.--Francis Flinch (talk) 21:22, 24 January 2019 (UTC)Reply
SAAMI say .309-.311" (7.85.7.90mm) (see their official specs, now added as ref to the article, along with the CIP's official specs). Russian sources say 7.85mm, BTW, regardless of what CIP say... - Tom | Thomas.W talk 21:46, 24 January 2019 (UTC)Reply
As the 7.92 G1 is a safety ralated maximum dimension, 7.85 to 7.90 are totally credible and C.I.P. compliant diameters for actual production lots measurements. So if you tried to sell 7.62×39mm ammunition with ≥ 7.93 mm diameter projectiles to consumers in a C.I.P. member state you would get into trouble. Thanks for your addition.--Francis Flinch (talk) 09:36, 25 January 2019 (UTC)Reply

correcting the production history

edit

I read a lengthy document in Russian (google translated to English)that contradicts many dates on the Wikipedia page. It states in 1944 the 7.62x41 went into mass production. In 1947, the 7.62-mm automatic cartridge was upgraded at the Ulyanovsk Machine Building Plant: the sleeve was shortened to 38.7 mm. The document states it wasn't until 1947-1948 coinciding with the release of the AK-47 that the shorted case of 39mm (7.62x39) was produced. The production date of the 7.62x39 is different than the 7.62x41 and this was updated to the correct date. Furthermore both the "intermediate" 7.62x41 and the "automatic" 7.62x39 were designed in 1943 (which should also be updated from 1944). samples were submitted for mass production in 1943 and it was the 7.62x41 that was produced first. I think it is important to get this information right. article link below. Chapter 3, 6 and 7 are the important chapters.

https://translate.googleusercontent.com/translate_c?depth=1&hl=en&prev=search&rurl=translate.google.com&sl=ru&sp=nmt4&u=https://coollib.com/b/195891/read&xid=17259,15700022,15700186,15700191,15700248,15700253&usg=ALkJrhgG704vrzs2RCsufskZ9lk6H4Q5vQ#t6

currently stated Designed 1944 Produced 1944–present Revised Designed 1943 Produced 1947–present

After more detailed testing results became available, starting in 1944 the cartridge was tweaked in order to improve its accuracy and penetration After more detailed testing results became available, starting in 1947 the cartridge was tweaked by The Ulyanovsk Machine Building Plant in order to improve its accuracy and penetration

added to the History The 7.62×39 cartridge equipped with the PS bullet finally overcame all objections of the GAU in mid-1947, when it was ordered into series production, and given the index 57-N-231S. The 7.62×39 cartridge equipped with the PS bullet finally overcame all objections of the GAU in mid-1947, when it was ordered into series production, and given the index 57-N-231S.[7] Field tests of the round & new prototype AK-47 were carried out at the NIPSVO from December 16, 1947 to January 11, 1948.

The Brass Forest (talk) 03:41, 25 February 2019 (UTC)Joe 2/24/19Reply

Add?

edit

Here are some varieties of cartridges with brief descriptions. Maybe somehow cite it in an article?--188.66.34.192 (talk) 17:58, 2 January 2022 (UTC)Reply

A better link https://ru.wikipedia.org/wiki/7,62_×_39_мм#Номенклатура_патронов --188.66.34.192 (talk) 18:08, 2 January 2022 (UTC)Reply