Talk:ADM-3A

Metal cage? Rugged??? Say what?

I seriously question the second sentence of the article.

one of the most rugged chassis ever to be employed in any computing equipment, being constructed with a very thick metal frame (over an inch at the thickest bits).

I believe that the case is not metal, and the word "rugged" is not correct.

I have two of these terminals, and I repaired many in the early 1980s. All of the ones that I've seen had lightweight plastic cases. I remember reading that they are Bakelite.

These things are not "rugged". While collecting the two that I have, I received one that was destroyed during shipping when the weight of the picture tube caused the top of the clamshell case to snap. I'd use the word "brittle." From my early repair work, I've seen that the majority of the weight is in the vacuum picture tube and in the large laminated-steel-core Transformer.

Finally, the density of the "thick metal frame" would put the weight far over the mere claimed 32-lb weight. I have a milling machine. Believe me. Just the vise for the mill weighs 42 lbs, and it has much less metal than the case would have if it were cast metal.

So, here's what I've been able to find. In a copy of the maintenance manual one reads that the case is "molded" and that the weight is 25 lbs. An operators manual says that the weight is 32 lbs. There were at least two versions of this terminal. The later ones used integrated chips and probably had a smaller transformer. The earlier ones had a board full of TTL chips, which would have required a larger transformer. So it's possible that both references are correct.

KerryVeenstra 17:55, 12 November 2007 (UTC)

• I've blown away the nonsense. --jpgordon^∇∆∇∆ 18:47, 12 November 2007 (UTC)

History

This page needs more info on the history of this terminal. I could only find this reference about it being introduced in 1975 http://books.google.com/books?id=QqkOKwiaINMC&pg=PA86&lpg=PA86&dq=adm-3a+1975&source=bl&ots=cuWwNJpb_S&sig=Rzn7-Db43kCQUoiROIB0xSkO5UY&hl=en&sa=X&oi=book_result&resnum=8&ct=result —Preceding unsigned comment added by 128.122.20.39 (talk) 21:57, 9 January 2009 (UTC)

vi (editor)

Is it right, that VI was developed on the ADM-3A? A lot of key mappings make a lot of sense if that is true ... —Preceding unsigned comment added by 134.61.14.38 (talk) 17:03, 4 March 2009 (UTC)

Yes, it's true. Bill Joy, the original author of vi, had an adm3a at home in about 1978. That's where the hjkl as arrow keys came from. It's also why vi is usable on a dumb terminal at 300 baud - that's what Bill had. I was at Berkeley at the time and Bill told me this directly. -- gazotz 6 January 2019.

Looks like it:

http://www.catonmat.net/blog/why-vim-uses-hjkl-as-arrow-keys/

SeanJA (talk) 19:52, 9 March 2012 (UTC)

But not a WP:RS. For that matter, vi was written well before any direct experience by any of vim's developers TEDickey (talk) 21:39, 9 March 2012 (UTC)

Control Key

The article spends a lot of text explaining the position of the control key on that terminal, and on modern keyboards, and giving pointers on how people can change the location of their control key. Actually, the control location was not specific to that terminal, it was the standard of the time. As far as I know, all DEC keyboards had the control key at that location, and early PC keyboards (XT/AT) also had it there. So, it does not make much sense to spend all that text talking about it here. Either create a dedicated article, or move the section to the article about the first PC keyboard where it was moved to the bottom. See for example IBM PC keyboard. — Preceding unsigned comment added by 82.67.126.180 (talk) 07:24, 10 March 2012 (UTC)

"all DEC keyboards" has a problem: most of DEC's video terminals were released after ADM-3a. Likewise PC keyboards (all in this case, not merely "most"). The comment above has no WP:RS, but appears to be simply a personal reflection. In particular, there were no standards. There were other terminals with different layouts; the usual comment seems to be contrasting the locations of control- and escape-keys (some keyboards including DEC's lacked an escape key, e.g., LK201). For some keyboards, control was above escape, for example. But bringing DEC into the discussion is much like introducing IBM PC's - DEC wasn't a major player in that area until it introduced the VT100 (in the following year). Here are a few interesting links [1], [2] TEDickey (talk) 20:10, 10 March 2012 (UTC)

My recollection was that the control key was "always" next to the A key, where Caps lock is now. The Teletype Model 33 had the same layout. Fool4jesus (talk) 03:04, 9 January 2017 (UTC)

That was the standard, yes. I do remember it was not without its problems though - years after the PC layout became standard the Acorn Archimedes insisted on keeping the CTRL key next to "A" (to misquote Jerry Pournelle a little.. where God intended it to be*). The problem was that CTRL-A meant "Select All" (as is common now) and was easy to hit by accident. So people would bash away at the keyboard, accidentally select everything and then overwrite it. If the application didn't have an "Undo" function (and many didn't) then they would lose everything. The problem was compounded by the users (students in this case) having been taught to ALWAYS save their work if something seemed not to be working properly. So, they overwrote their saved copy with a blank file. Oops. (*From memory, Pournelle advocated CTRL next to A, ESC next to 1, a big RETURN key right next to the P and CAPS LOCK keys that actually locked). Shritwod (talk) 09:01, 9 January 2017 (UTC)

Correct, the Teletype (at least since the model 33, and possibly earlier) had Ctrl to left of A. Caps lock didn't come along until later. Control to left of A was standard on most terminals at the time, although some later added a Caps Lock between Ctrl and A. Typewriters, on the other hand, had Shift Lock to left of A, and no Ctrl key. When the PC/AT came along, they moved Caps Lock left of A and put Ctrl below Shift, over the objections of most computer scientists. I was told this was so typists would more readily accept the PC, and this became standard quickly. -- gazotz 6 January 2019.

Tektronix graphics add-on

In one of the two ADM3A terminals I used some 20 years ago there was an additional circuit board mounted on top of the original board, about the same size. The terminal was able of drawing according to the Tektronix Plot-10 standard commands. Sadly to say, the terminal is since long lost so I'm unable to collect any more information about the extra card. However, I think it might be of interest to note and possibly to do some extra research into. — Preceding unsigned comment added by 95.109.102.225 (talk) 16:58, 30 June 2013 (UTC)

repurposing "home"

The ADM-3A manuals are unambiguous: control/home moves the cursor to the upper left. Home-keys were used in many terminals. There doesn't appear to be any reliable source for either of the statements about home (chdir or regex). Likewise, there's no source for the "dominant terminal" statement. Lacking a WP:RS, the entire paragraph can be deleted. TEDickey (talk) 20:23, 6 September 2014 (UTC)

Teletype Model 33

ADM-3A replaced Teletype Model 33 at many locations~~ Xb2u7Zjzc32 (talk) 00:48, 9 March 2015 (UTC)

Yes, and? --jpgordon^{::==( o )} 03:33, 9 March 2015 (UTC)

key labels for arrow keys

The given source is problematic, because the reproduction quality is so low that only someone who knows what they are looking for can find the pictures of the arrow keys (and those are small enough that they can be mistaken for existing dirt on the pages). The apparent reference is to figure 3-1 and the (equally poor) depiction in text on the follow page. A useful source would be a photograph of the keyboard. The reason for the original tag was that no usable reliable source was found in written discussion. TEDickey (talk) 10:27, 9 March 2015 (UTC)

The arrow key labels are clearly legible at full size on the photo accompanying the article.— Preceding unsigned comment added by OMPIRE (talk • contribs)

interesting (does not work for all browsers, by the way). It would be nice if there were a usable written source TEDickey (talk) 09:02, 10 March 2015 (UTC)

I'm not sure what version of the operations manual was linked before, the URL was dead -- I've updated it to a version where I can see the arrow keys on figure 3-1. Also note table 3-1 shows the control keys and on page 3-6 there is a discussion of "Backspace", "Downline", "Upline" and "Forespace" which explains the use of the keys. (Note that usage is combined with CTRL, whereas vi used the mnemonics on the keys without the CTRL key.) David- (talk) 00:51, 28 February 2023 (UTC)

works for me TEDickey (talk) 10:05, 28 February 2023 (UTC)

ADM-3 and ADM-3A

This page appears to discuss both the ADM-3 and ADM-3A, and, in some places, to do so in ways that don't make it clear what it's referring to. The ADM-3A, as per the Computerworld reference, appears to have come out in 1976; the ADM-3 may have come out prior to 1976. Guy Harris (talk) 21:07, 13 July 2016 (UTC)

1975 for the ADM-3 (according to the Terminals Wiki). That Wiki does cite some reliable sources in itself, which IMO infers that it is also a reliable source. The ADM-3 wasn't as significant device as the ADM-3A because the former didn't have cursor addressability or even lowercase. The 1976 date is also more credible that 1974 because the VT52 which was one of the very first mixed case/cursor addressable units came out in 1975, I don't believe that LSI beat DEC to market. Shritwod (talk) 08:20, 14 July 2016 (UTC)

Wikipedia cites reliable sources, too, but it's not a reliable source itself; as such, I refuse to consider the Terminals Wiki any more a reliable source than Wikipedia itself - if it makes a claim with a reliable source, we should use that source as the reference, not the Terminals Wiki (and using the Terminals Wiki page as the reference also adds a useless and annoying extra level of indirection). Guy Harris (talk) 09:02, 14 July 2016 (UTC)

External links modified

Hello fellow Wikipedians,

I have just modified one external link on ADM-3A. Please take a moment to review my edit. If you have any questions, or need the bot to ignore the links, or the page altogether, please visit this simple FaQ for additional information. I made the following changes:

• Added archive https://web.archive.org/web/20110225082338/http://www.manicai.net:80/comp/swap-caps-ctrl.html to http://www.manicai.net/comp/swap-caps-ctrl.html

When you have finished reviewing my changes, please set the checked parameter below to true or failed to let others know (documentation at {{Sourcecheck}}).

Y An editor has reviewed this edit and fixed any errors that were found.

• If you have discovered URLs which were erroneously considered dead by the bot, you can report them with this tool.
• If you found an error with any archives or the URLs themselves, you can fix them with this tool.

Cheers.—InternetArchiveBot (Report bug) 02:15, 1 October 2016 (UTC)

Works, although it needed a real title - I gave it one. Guy Harris (talk) 06:12, 1 October 2016 (UTC)

ADM-3 Fan club

Does anybody remember the ADM-3 fan club? I think somewhere around here I still have the old "publicity photo" they sent out. Man, I'm an old fart. If you are too, contact me! Fool4jesus (talk) 00:33, 9 January 2017 (UTC)

External links modified

Hello fellow Wikipedians,

I have just modified 3 external links on ADM-3A. Please take a moment to review my edit. If you have any questions, or need the bot to ignore the links, or the page altogether, please visit this simple FaQ for additional information. I made the following changes:

• Added archive https://web.archive.org/web/20150402133217/http://manx.classiccmp.org/mirror/vt100.net/lsi/adm3-mm.pdf to http://manx.classiccmp.org/mirror/vt100.net/lsi/adm3-mm.pdf
• Added {{dead link}} tag to http://www.bitsavers.org/pdf/learSiegler/ADM3A_Maint.pdf
• Added archive https://web.archive.org/web/20120427101210/http://bitsavers.org/pdf/learSiegler/DP2880486F_ADM3A_UM_Apr86.pdf to http://www.bitsavers.org/pdf/learSiegler/DP2880486F_ADM3A_UM_Apr86.pdf
• Corrected formatting/usage for http://www.manicai.net/comp/swap-caps-ctrl.html

When you have finished reviewing my changes, you may follow the instructions on the template below to fix any issues with the URLs.

Y An editor has reviewed this edit and fixed any errors that were found.

• If you have discovered URLs which were erroneously considered dead by the bot, you can report them with this tool.
• If you found an error with any archives or the URLs themselves, you can fix them with this tool.

Cheers.—InternetArchiveBot (Report bug) 23:00, 23 June 2017 (UTC)

Most of 'em just moved. Guy Harris (talk) 00:15, 24 June 2017 (UTC)

coincidence of home vs tilde

The comment about tilde versus home-directory might be coincidence. A reliable source mentioning the relationship which was written in the mid-1970s would be needed to support this statement. TEDickey (talk)

I was at Berkeley at the time, and this is the first I've heard that tilde as UNIX home came from the adm3a. However, since tilde as home originated in csh, which Bill Joy wrote, and since he had an adm3a at home, it seems possible. He would know. -- gazotz 6 January 2019.

Sadly, neither of us is a reliable source for the statement in question. I did program using the terminal TEDickey (talk) 23:45, 6 January 2019 (UTC)

more (command) and ADM-3A

https://danhalbert.org/more.html

Oko5ekmi5 (talk) 09:24, 26 September 2020 (UTC)

ISSUES WITH ADM-2 INFO SOURCES!

A "PC Magazine" article by Benj Edwards October 13, 2016 (https://www.pcmag.com/news/the-forgotten-world-of-dumb-terminals), and Marc Roessler's archived webpage (https://web.archive.org/web/20041011034203/http://www.tentacle.franken.de/adm3a/index.html) cites Brian M. O'Connell's page (https://cs.ccsu.edu/~boconnel/annex.htm) which states that the "ADM-3A was released in 1974 that became popular with early personal computer builders due to its relatively low cost ($995 in kit form, $1,195 assembled)" The problem though, is that this conflicts with the timeline derived from cited statements in the rest of the article, which suggests that the ADM-3A didn't come out til 1976.

There is also the uncited statement in this article, "The ADM-1 was followed by the ADM-2 in early '74. It had expanded functionality and a detached keyboard." This suggests to me that Brian O'Connell confused the ADM-3A with the ADM-2. Unfortunately I have found no source that does not cite Mr. O'Connell's statement on his webpage here. There's also the circumstantial evidence that it seems unlikely the ADM-3A or even the AMD-3 would be available as a kit, as the assembled product was so successful in the marketplace.

It would be very helpful if anyone can source that it was the ADM-2, and not the 3A, was "$995 in kit form, $1,195 assembled". This also would support statements that the ADM-2 popularity among early computer hobbyists propelled the interest in, and perhaps the sales of the later models. This is one of the problems with sourcing from web pages "back in the day". People weren't citing sources or even linking, at least not adequately, on the internet. — Preceding unsigned comment added by 76.120.37.128 (talk) 22:26, 17 May 2021 (UTC)