Talk:Arc welding/GA1

Latest comment: 16 years ago by Pyrotec in topic GA Review

GA Review

edit

Article (edit | visual edit | history) · Article talk (edit | history) · Watch

Starting GAR.Pyrotec (talk) 19:47, 31 October 2008 (UTC)Reply

Initial review

edit

The article is quite readable and has a number of relevant illustrations. So on these scores its acceptable for GA.

My main concern is WP:Verify. The article has in-line citations for the "practical" aspects of arc welding, but not very much on other aspects. For example:

  • statements about forge welding unrefenced
  • Humphry Davy unreferenced
  • Welding of ships in WW I

I suspect that I may put the article's GAR On Hold until these problems are fixed.Pyrotec (talk) 20:47, 31 October 2008 (UTC)Reply

They are actually covered in refs 1 & 4 respectively. Nergaal (talk) 04:09, 2 November 2008 (UTC)Reply

GAR On Hold

edit

Overall this article has a wide scope and reasonable prose; and it appears to be of the right level of detail to gain GA-status.

It forms part of a series of articles on welding; with several common blocks of text used in multiple articles. Some of these other welding articles, with common text, have long standing FA-status, e.g. Welding - May 2005, Gas metal arc welding - September 2005, Shielded metal arc welding - February 2006. However, under the current guidelines this particular article is possibly marginal in respect of WP:Verify and possibly Scope.

Specific problems (possibly common amongst several welding articles):

  • Vagueness of dates - not all statements have in-line citations.
    • discovery of electric arc by Davy given as 1800, another ref in my possession states 1808.
    • The Fullagar, misspelt as Fulagar appears to be post WW I, not actually WW I. So I corrected & copedited this part.
  • Typical welding currents and voltages are absent from the Power Supplies section.
  • The Welding operation is not discussed - a summary of e.g. Shielded metal arc welding#Operation provides an example of how this might be covered.
  • No discussion of types of welds, such as butt weld, lap welds, etc, - Welding#Geometry provides a example of how this might be covered.
  • No discussion of the problems that can be caused by the heat of welding, such a bending and distortion of the work pieces; and how this might be addresses during welding operations.
  • No discussion of the various coatings of the electrodes - Shielded metal arc welding#Electrode provides an example of how this might be covered.

For these reasons, I'm keeping the article on On Hold, but I will reset to date today's date.

I'm sorry if this appears harsh in the light of other welding articles that currently have FA status; as these other welding articles do have some "common problems".Pyrotec (talk) 18:49, 2 November 2008 (UTC)Reply

GA review – see WP:WIAGA for criteria

  1. Is it reasonably well written?
    A. Prose quality:  
    B. MoS compliance:  
  2. Is it factually accurate and verifiable?
    A. References to sources:  
    Article lacks adequate references in some sections, whilst other sections, such as Development and Consumable electrode modes, are well referenced.
    B. Citation of reliable sources where necessary:  
    Article lacks adequate in-line citations in some sections; and some of the statements made are wrong or historically inaccurate.
    C. No original research:  
  3. Is it broad in its coverage?
    A. Major aspects:  
    A wide range, but a number of areas that aught to be in it are missing.
    B. Focused:  
  4. Is it neutral?
    Fair representation without bias:  
  5. Is it stable?
    No edit wars, etc:  
  6. Does it contain images to illustrate the topic?
    A. Images are copyright tagged, and non-free images have fair use rationales:  
    B. Images are provided where possible and appropriate, with suitable captions:  
  7. Overall:
    Pass or Fail:  
    {{#if:This welding article is one of a whole series of articles on welding; many of which share common blocks of text. Many of these shared text blocks, some of which are under-referenced and/or inaccurate, also appear in a number of welding articles that were awarded FA status in 2005/6 and which aught to be reviewed (and downgraded where appropriate).Pyrotec (talk) 08:26, 7 November 2008 (UTC)|This welding article is one of a whole series of articles on welding; many of which share common blocks of text. Many of these shared text blocks, some of which are under-referenced and/or inaccurate, also appear in a number of welding articles that were awarded FA status in 2005/6 and which aught to be reviewed (and downgraded where appropriate). The article was put On Hold for these to be addressed - no action took place, so the article fails.Pyrotec (talk) 08:31, 7 November 2008 (UTC)Reply