Talk:Cladding (metalworking)

this article is linked with articles on coins eg. the US "dime", which have a cupronickel "cladding"...

...but the article is not very helpful regarding coin cladding at all. Can anyone help? ROxBo 03:39, 10 April 2007 (UTC)

I can't be sure, but I would say that as with UK minted coins, the core copper is cleaned and prepared and the cupronickel cladding is then roll bonded to the core material. I can't say how much material is used but because plastic deformation takes place the raw materials will no doubt be thicker than the finished result.--Lead holder (talk) 08:59, 7 December 2011 (UTC)

External links modified

Hello fellow Wikipedians,

I have just modified 6 external links on Cladding (metalworking). Please take a moment to review my edit. If you have any questions, or need the bot to ignore the links, or the page altogether, please visit this simple FaQ for additional information. I made the following changes:

• Added archive https://web.archive.org/web/20120328030041/http://www.mtu.de/en/technologies/repair_techniques/laser_powder_cladding/index.html to http://www.mtu.de/en/technologies/repair_techniques/laser_powder_cladding/index.html
• Added archive https://web.archive.org/web/20150720051133/http://www.beam-machines.fr/uk/innovation/techology.html to http://www.beam-machines.fr/uk/innovation/techology.html
• Added archive https://web.archive.org/web/20101207085306/http://www.ccl.fraunhofer.org/download/cladding_titanium.pdf to http://www.ccl.fraunhofer.org/download/cladding_titanium.pdf
• Added archive https://web.archive.org/web/20110926224642/http://www.alspi.com/lasercladding.htm to http://www.alspi.com/lasercladding.htm
• Added archive https://web.archive.org/web/20100311075620/http://www.fwgartner.com/fwgts_prodserv_qa_laser.htm to http://www.fwgartner.com/fwgts_prodserv_qa_laser.htm
• Added archive https://archive.is/20130116124148/http://www.additive3d.com/lens.htm to http://www.additive3d.com/lens.htm

When you have finished reviewing my changes, you may follow the instructions on the template below to fix any issues with the URLs.

This message was posted before February 2018. After February 2018, "External links modified" talk page sections are no longer generated or monitored by InternetArchiveBot. No special action is required regarding these talk page notices, other than regular verification using the archive tool instructions below. Editors have permission to delete these "External links modified" talk page sections if they want to de-clutter talk pages, but see the RfC before doing mass systematic removals. This message is updated dynamically through the template {{source check}} (last update: 5 June 2024).

• If you have discovered URLs which were erroneously considered dead by the bot, you can report them with this tool.
• If you found an error with any archives or the URLs themselves, you can fix them with this tool.

Cheers.—InternetArchiveBot (Report bug) 16:10, 8 August 2017 (UTC)