| This is the talk page for discussing improvements to the DevSlp article. This is not a forum for general discussion of the article's subject. |
Article policies
|
| Find sources: Google (books · news · scholar · free images · WP refs) · FENS · JSTOR · TWL |
 | This article was nominated for deletion on 19 August 2014 (UTC). The result of the discussion was keep. |
 | This article has not yet been rated on Wikipedia's content assessment scale. It is of interest to the following WikiProjects: | ||||||||||
| |||||||||||
DevSleep and 3.3v systems (the info to that website on the wiki about devslp is an assumption not fact)
editDevSleep and 3.3v systems not working is not proven (the link it leads to does provide any evidence that it 3.3v rail enabled makes it fail) DevSleep uses a signal on the unused 3.3v pins (Power present on the 3.3v rail will not enable DevSleep permanently only once or not at all as the drive will ignore a constant power on 3.3v rail),
i currently own 2 SSDs that i was not aware that they even supported devsleep and have working perfectly fine in both desktops
the link and the comment was most seems to be an assumption if 3.3v is there the SSD will not work (even if it did set the drive to devsleep any activity on the SATA link would permanently wake up the SSD), and the comment on the same article likely due to a faulty SSD) http://www.heise.de/ct/hotline/SSD-mit-Devsleep-Funktion-2238150.html
i edit it soon if no one else does Leexgx (talk) 02:03, 18 April 2015 (UTC)
- Hello! Sorry, I'm having slight troubles understanding what are you actually trying to describe? Any chances, please, for elaborating it a bit further? Thank you. — Dsimic (talk | contribs) 13:47, 8 May 2015 (UTC)
DEVSLP example
editHere is an example of what happens when an M.2 SSD is attached to a SATA adapter which does not support DEVSLP:
http://forum.hddguru.com/viewtopic.php?f=1&p=255184
In this particular case a voltage of +3.3V was present at SATA pin P3, which was then interpreted by the SSD as a sleep signal (DEVSLP = high). DEVSLP turns off a MOSFET which is configured as a high side power switch.
Here is a product (SATA - M.2 adapter) which supports DEVSLP: http://www.microsatacables.com/sata-iii-to-m2-ssd-adapter-device-sleep-mode-devslp-m2-devslp-pcb http://www.microsatacables.com/media/catalog/product/cache/1/image/650x/040ec09b1e35df139433887a97daa66f/a/d/ad909a_-_device_sleep_devslp_.jpg
Here is an article which explains PWDIS (the SATA equivalent of DEVSLP):
Power Disable Feature (SATA 3.2+ / 3.3): http://www.hddoracle.com/viewtopic.php?f=42&t=2094&p=13846 — Preceding unsigned comment added by 124.171.24.178 (talk) 19:54, 22 February 2018 (UTC)