Talk:Digital potentiometer

Electronics Mid‑importance

	Electronics portal This article is part of WikiProject Electronics, an attempt to provide a standard approach to writing articles about electronics on Wikipedia. If you would like to participate, you can choose to edit the article attached to this page, or visit the project page, where you can join the project and see a list of open tasks. Leave messages at the project talk pageElectronicsWikipedia:WikiProject ElectronicsTemplate:WikiProject Electronicselectronic articles
Mid	This article has been rated as Mid-importance on the project's importance scale.

External links modified

Latest comment: 7 years ago1 comment1 person in discussion

Hello fellow Wikipedians,

I have just modified one external link on Digital potentiometer. Please take a moment to review my edit. If you have any questions, or need the bot to ignore the links, or the page altogether, please visit this simple FaQ for additional information. I made the following changes:

Added archive https://web.archive.org/web/20110907012735/http://www.analog.com:80/en/technical-documentation/frequently-and-rarely-asked-questions/resources/digital-to-analog-converters/digital-potentiometers/listing.html to http://www.analog.com/en/technical-documentation/frequently-and-rarely-asked-questions/resources/digital-to-analog-converters/digital-potentiometers/listing.html

When you have finished reviewing my changes, please set the checked parameter below to true or failed to let others know (documentation at {{Sourcecheck}}).

This message was posted before February 2018. After February 2018, "External links modified" talk page sections are no longer generated or monitored by InternetArchiveBot. No special action is required regarding these talk page notices, other than regular verification using the archive tool instructions below. Editors have permission to delete these "External links modified" talk page sections if they want to de-clutter talk pages, but see the RfC before doing mass systematic removals. This message is updated dynamically through the template {{source check}} (last update: 5 June 2024).

If you have discovered URLs which were erroneously considered dead by the bot, you can report them with this tool.
If you found an error with any archives or the URLs themselves, you can fix them with this tool.

Cheers.—InternetArchiveBot (Report bug) 03:05, 13 December 2016 (UTC)Reply

Citation help

Latest comment: 7 years ago1 comment1 person in discussion

I was reading this entry and noticed the "Citation needed" tag at the end of the "Design" paragraph regarding the existence of OTP (one time programmable) and programmable digital pots.

Here's a link to a source. Having not the experience nor the inclination to sort through the mess that is the "how to add citation" page, I'm going to leave the link and someone else can add the citation. https://www.maximintegrated.com/en/products/analog/data-converters/digital-potentiometers.html To quote the relevant section:

DIGITAL POTENTIOMETERS Digital potentiometers (digipots) are used to trim and scale analog signals. They provide an output resistance that is variable based on digital inputs and so are sometimes referred to as resistive digital-to-analog converters (RDACs).

Digipots are typically available with linear or logarithmic tap points. In addition, Maxim offers some further variations of the basic digipot. Nonvolatile digipots retain their last programmed wiper position when the power supply is switched off. OTP digpots set the wiper's power-on reset (POR) position to a user-defined value.

185.145.65.196 (talk) 21:36, 30 June 2017 (UTC) someone who wants to help, but who can't be bothered dealing with the twats that run this place in recent yearsReply

Add topic