Talk:Dinitrogen tetroxide

Latest comment: 11 months ago by 2001:8003:E40F:9601:645D:C915:B2CA:4B75 in topic Safety issues

Untitled

edit

Di nitrogen tetroxide IS listed on the IUPAC site YOU list !

good inorganic IUPAC link: http://www.cofc.edu/~deavorj/101/nomenclature.html



Appearance... Is it really brown? I seem to remember an experiment where 2 NO2 <->N2O4 via a change in pressure or temperature; and the glass vessel being a brown shade when in the NO2 form and clear when in the N2O4 form. It is this constant equilibrium between the two gases that make N2O4 appear brown, when really its the NO2 that is brown. see link http://chem-courses.ucsd.edu/Uglabs/Lecture/Demos//04.html Piyrwq 16:41, 15 August 2005 (UTC)Reply

I added a note there. R6144 14:54, 26 August 2005 (UTC)Reply

When frozen, N2O4 is a white solid (if pure)but as soon as it begins to melt(-11C) the drak brown NO2 molecule impart a progressive coloration to the liquid and when allowed to stand at room temperature the liquid is almost extremely dark brown (almost black). Those expericence wuth NTO learn to be able to tell the approximate temperture of the cooled liquid just by its colour.

Please verify the data for NO2 and N2O4

edit

The data for NO2 and N2O4 are not very consistent in literature, probably because they always exist together in equilibrium. Verification of the data is recommended before use. R6144 14:54, 26 August 2005 (UTC)Reply

Isn't it impossible to have accurate data on the individual bp/mp of no2/n2o4 since they are in eqm. anyway?

Molar mass

edit

I'm almost cerain that molar mass of this compuond is not equal to 7.7 carbon atoms. --Krgeqewrjsif (talk) 09:57, 20 July 2008 (UTC)Reply

The molecular weight of N2O4 is 92.011. I just checked it in ChemDraw.
Ben (talk) 16:13, 20 July 2008 (UTC)Reply

Equilibrium Push

edit

Disclaimer: I am *so* not a professional chemist, but from the article:

"Higher temperatures push the equilibrium towards nitrogen dioxide."

That doesn't seem right... why would higher pressures tilt the equilibrium toward twice as many molecules? In most cases that I am familiar with, increasing pressure on a gas favors the smaller number of molecules.

Riventree (talk) 03:13, 6 December 2011 (UTC)Reply

 

For the equilibrium:

N2O4 ⇌ 2 NO2

ΔG can be calculated at any temperature, and it has been done [1] using known values for ΔH and ΔS. Where ΔG is negative, the reaction is spontaneous, whereas if ΔG is positive, the reaction is not. That's the quick answer. --Rifleman 82 (talk) 03:41, 6 December 2011 (UTC)Reply

Har... well since my disclaimer was true, the above makes almost no sense to me, but appears sufficiently authoritative that I withdraw the question and leave it to the expert. Thank you, Rifleman 82.

Riventree (talk) 04:04, 6 December 2011 (UTC)Reply

You can take a look at Gibbs free energy. --Rifleman 82 (talk) 04:46, 6 December 2011 (UTC)Reply

hazard diamond

edit

In the graphic, the yellow part of the diamond displays a zero, indicating 'un-reactive', despite that fact in the table above, the chemical is mentioned as reacting with water. Plus, since it IS a rocket fuel, one would expect it to be reactive.Mr Morden76 (talk) 21:33, 29 July 2013 (UTC)Reply

Assessment comment

edit

The comment(s) below were originally left at Talk:Dinitrogen tetroxide/Comments, and are posted here for posterity. Following several discussions in past years, these subpages are now deprecated. The comments may be irrelevant or outdated; if so, please feel free to remove this section.

More information needed. Wim van Dorst (Talk) 21:04, 16 May 2007 (UTC)Reply

Last edited at 21:04, 16 May 2007 (UTC). Substituted at 13:27, 29 April 2016 (UTC)

edit

Hello fellow Wikipedians,

I have just modified one external link on Dinitrogen tetroxide. Please take a moment to review my edit. If you have any questions, or need the bot to ignore the links, or the page altogether, please visit this simple FaQ for additional information. I made the following changes:

When you have finished reviewing my changes, you may follow the instructions on the template below to fix any issues with the URLs.

This message was posted before February 2018. After February 2018, "External links modified" talk page sections are no longer generated or monitored by InternetArchiveBot. No special action is required regarding these talk page notices, other than regular verification using the archive tool instructions below. Editors have permission to delete these "External links modified" talk page sections if they want to de-clutter talk pages, but see the RfC before doing mass systematic removals. This message is updated dynamically through the template {{source check}} (last update: 5 June 2024).

  • If you have discovered URLs which were erroneously considered dead by the bot, you can report them with this tool.
  • If you found an error with any archives or the URLs themselves, you can fix them with this tool.

Cheers.—InternetArchiveBot (Report bug) 23:18, 10 September 2017 (UTC)Reply

edit

Hello fellow Wikipedians,

I have just modified one external link on Dinitrogen tetroxide. Please take a moment to review my edit. If you have any questions, or need the bot to ignore the links, or the page altogether, please visit this simple FaQ for additional information. I made the following changes:

When you have finished reviewing my changes, you may follow the instructions on the template below to fix any issues with the URLs.

This message was posted before February 2018. After February 2018, "External links modified" talk page sections are no longer generated or monitored by InternetArchiveBot. No special action is required regarding these talk page notices, other than regular verification using the archive tool instructions below. Editors have permission to delete these "External links modified" talk page sections if they want to de-clutter talk pages, but see the RfC before doing mass systematic removals. This message is updated dynamically through the template {{source check}} (last update: 5 June 2024).

  • If you have discovered URLs which were erroneously considered dead by the bot, you can report them with this tool.
  • If you found an error with any archives or the URLs themselves, you can fix them with this tool.

Cheers.—InternetArchiveBot (Report bug) 16:14, 21 January 2018 (UTC)Reply

Safety issues

edit

Nitrogen tetroxide is a very aggressive oxidant, and as such requires great handling precautions. I have read (but cannot confirm) that nitrogen tetroxide spilt on the skin will immediately and violently react with and oxidise subcutaneous fat, so violently that it can spontaneously burst into flame. 2001:8003:E40F:9601:645D:C915:B2CA:4B75 (talk) 23:13, 7 December 2023 (UTC)Reply