Talk:Ford Mustang (fourth generation)

Latest comment: 2 years ago by 67.140.232.183 in topic Performance change for 1999

Removing Main Image Rationale

edit
Here it is: the guidelines for images of cars — Wikipedia:WikiProject Automobiles/Conventions#Images. Please note the following items in particular:
  • #5 — "they should include all original parts"
  • #11 — "Avoid taking pictures of heavily customized cars as they may not be very representative of the vehicles most common appearance, unless the text in context to the picture is dealing with the customization of the vehicle."
This article is not about customized Ford Mustangs. I hope quoting these Wiki conventions here will serve as notice to editors and thus avoid problems in the future.
  • Please also follow the guidelines as discussed on Wikipedia talk:WikiProject Automobiles. Wikipedia articles and their images attempt to present the subject as it was originally made. There are more than enough "fair use" images of completely stock Ford Mustangs. There is no need to have customized Mustangs on this page. There are many websites that will gladly host images of customized cars. 206.125.176.3 (talk) 18:02, 28 April 2008 (UTC)Reply


"Though the 1996-1998 Mustang GT maintained a similar horsepower output of the earlier cars, the smaller displacement engine 4.6 L engine produced less torque over a smaller range than the older Windsor engine resulting in a slightly slower vehicle" I'd like to see evidence of this. the older 302 had similar amounts of torque coming in earlier in the rpms, while the SN95 had it coming in later. Was often regarded as the "same" performance and not worse. Read Edmund's SN95 review from the 90's. If you have some proof/citation let me know. MustangAficionado (talk) 06:34, 30 August 2008 (UTC)Reply


I changed "a claimed 390hp..." to "resulted in 390 horsepower (291 kW) and 390 ft·lbf (529 Nm) of torque, which is often argued to be an underrated figure." It's common knowledge in the mustang community that these cars were publicized as 390hp for insurance reasons due to the Z06's 400hp region. They often put down from 365-380rwhp/rwtq which with an average of 15% drivetrain loss through the T-56 means the flywheel is closer to (370/.85 =) 435 —Preceding MustangAficionado (talk) 06:34, 30 August 2008 (UTC) Reply

How many SN-95 2 mustangs there exist?

edit

This article isn't quite clear about the different models that used the SN-95 2 body.
As far as I can tell from the article, there is the Cobra, the Saleen, the Mach 1, the Bullitt, and the GT.
Anything else? Hrgwea (talk) 05:04, 14 February 2011 (UTC)Reply

What's the difference between the SN95 and the SN95-2? Subplanar (talk) 22:02, 10 June 2011 (UTC)Reply

The SN-95 is the Mustang body style which was introduced in 1995. The SN95-2 is basically a re-panelling of the old car. The base stayed the same, that's why people call it something like v2 of the SN95 ;) Sunstarfire (talk) 13:01, 20 August 2012 (UTC)Reply


I deleted some redundant info which could also be found on the Cobra-page. I also added the links to that page at the appropriate places. Sunstarfire (talk) 13:01, 20 August 2012 (UTC)Reply

Ford Mustang Phases

edit

Due to the changes of the Mustang throughout the 1994-2004 era, I created "phases" to breakdown what each year changed internally/externally. Hope it helps! GT42CWR-MP (talk) 03:48, 30 July 2014 (UTC)Reply

Year Phase Descrpition
1994/1995 Ia Curved/Fluted Carbody (body trim is removed)

Coupe or Convertible body styles are offered

3.8L 232 CID Essex V6 (145 horsepower) & 5.0L 302 CID Windsor V8 (215 horsepower) engines are standard

Ignition Control Module introduced for both V6 and V8 models

Removable hardtop (optional for 1994-1995)

White gauge pointers & thinner odometer/trip meter numbers introduced

Anti-Lock Braking System introduced (Optional)

EEC-IV Computer System with OBD-I standard for V8 Models

EEC-V Computer System with OBD-II standard for V6 Models

Air vents in front of rear wheel well are introduced

Headlights with silver casings are standard

Beaded upper door panels

Smooth mirrors

Fuel tank evaporator canister vacuum hose attached to brake booster vacuum hoses (V6 models only)

Constant Control Relay Module (CCRM) located adjacent to Coolant Overflow Tank

Borg-Warner T5 (Manual) Transmissions & Ford AOD-E (Automatic) Transmissions are introduced for both V6 and GT

2:73 Gearing is stock for V6 Coupe, 3:08 for Convertibles & 3:27 for GT models

1996 Ib Vertically-barred tail lights now introduced/Revised tail light wiring layout

4.6L 281 CID Romeo V8 replaces the 5.0L 302 CID Windsor V8

Medium Graphite replaces Opal Gray interior

Bright Red interior is discontinued

Revised hood latch configuration

Constant Control Relay Module (CCRM) now relocated under passenger fender

Black functional air vents in front of rear wheel well are discontinued (beginning January 1996 - all models)

Smooth upper door panels

Textured mirrors

Orange gauge pointers & thicker odometer/trip meter numbers introduced

Revised water pump (V6 models only)

EEC-V Computer System with OBD-II replaces EEC-IV with OBD-I computer system in V8 Models only

Ignition Control Module discontinued for both V6 & V8 models

15" x 7" Spur & 17" x 8" Diamond Cut wheels are introduced

Borg-Warner T45 (Manual) and Ford 4R70W (Automatic) replace the Borg-Warner T5 (Manual) & Ford AOD-E (Automatic) respectively with 6-bolt flywheel

Revised radiator & moveable overflow tank bracket (GT only)

Honeycomb grille introduced on headlight nose panel (1996 only; 97/98 still had preforations for grille installation)

1997 Ic Passive Anti-Theft System (PATS) is introduced on all models

Thicker automatic transmission shifter introduced

Honeycomb grille behind the running pony is discontinued

Revised engine coolant temperature sensor & wiring (V6 models only)

Two-tone interior colors replaced with a single (monotone) interior color for door panels and rear side panels

Fuel tank evaporator canister vacuum hose now attached to revised throttle body plenum (V6 models only)

Black air vents in front of rear wheel well are now manufactured as solid pieces of plastic

Bright Machined aluminum wheels are introduced

Engine head gaskets revised (both GT & V6 models)

Enlarged radiator, overflow tank & radiator fan introduced for increased cooling capacity of engine

Overflow tank bracket is now bolted to radiator apron of car (GT only)

Revised A/C Condenser

1998 Id GT & V6 Sport Appearance Group Packages introduced

Revised Engine Control Unit (ECU) on all models

CD players & stereo clocks are now integrated on all models

Thicker power steering pulley flange (GT Only)

Revised vent plug (V6 models only)

Revised spark plug (V6 models only)

Mechanical diode replaces intermediate one-way roller clutch for 4R70W Transmissions only

Ash tray discontinued

Center console dual cup holders introduced

Shorter brake booster vacuum hoses introduced (V6 only)

Semi-returnless fuel system with two-speed fuel pump & basket introduced with integrated fuel pressure regulator on passenger fuel rail

Revised exhaust manifold & parallel exhaust hangers introduced (GT only)

Final year for 16" and 17" wheels to be made from Cast Aluminum

1999 IIa New Edge carbody design introduced in November 1998

Boomerang-like spoiler introduced

Revised cylinder head, port shape, piston & intake manifold for 260 hp Power Improvement (GT only)

Revised cylinder head, intake & camshafts for 190 hp Power Improvement (V6 only)

Revised T-45 synchro gearing/shift forks & speedometer now controlled via ECM

Improved suspension & steering

Headlights with silver casings are standard on all models

Fully-returnless fuel system introduced with fuel pressure regulated by PCM

16" and 17" wheels are now made from Forged Aluminum

Revised valve-body & integrated electronic speedometer on 4R70W Transmissions only

Revised front engine cover (GT only)

3:27 Gearing standard on all models

First year for the 4.6L 281 CID V8 engine to be fabricated at the Windsor plant with 8-bolt flywheel

Revised floorpan sealing to diminish road noise

1" seat track extension standard on all models

2000 IIb Rear child seat anchor brackets become standard

Glow-in-the-dark interior trunk release introduced

Revised belt tensioner

Final year for 16" wheels on GT models produced

Revised front engine cover (GT only)

Final year for the 4.6L V8 engine to be fabricated at the Windsor plant

2001 IIc Instrument lighting switched to Lime Green instead of Ice Blue

Intake Manifold Runner Control (IMRC) introduced for V6 Models, increases V6 horsepower to 193 from 190

Returning year for the 4.6L V8 engine to be fabricated at the Romeo plant

Thin flange power steering pump pulley (same as 1996-1997)

Pantograph-like spoiler design introduced

Revised heater core & inlet/outlet connectors

Dual center console cup holder becomes a single cup holder

Revised center console bezel

IAT now integrated with MAF Sensor

Ford 4R70W Transmission torque converter drain plug discontinued

V6 interior seat colors become two-toned, door panels become semi-two toned colored as well

Plastic crossover coolant tubing replaced with an aluminum version (GT only)

21/22 lb/hr pink top injectors replace 19 lb/hr yellow-top injectors (GT only - beginning January 2001)

Headlights with black casings now standard production on all models

Driver's side valve cover baffle revised (V6 only)

Revised harmonic balancer design (GT only)

Revised coil distributor connection (V6 only)

Borg-Warner TR3650 Manual Transmission replaces the T45 Manual Transmission (beginning January 2001 - GT only)

Revised shorter water pump (beginning January 2001 - GT only)

Torque Thrust wheels are introduced (optional)

Raised hood scoops and side scoops now standard production on GT models

Final year for 15” wheels on V6 models produced

2002 IId Visteon Mach 1000 sound system replaces the Mach 460 sound system on GT Models (optional for V6 Models)

16” wheels become standard on V6 models

Interior overhead storage net introduced for coupe models only

Full-width bar rocker panel decals replace pinstripe rocker panel decals (V6 only)

2003 IIe 1999 SVT Cobra hood becomes standard on all V6 models

Black valve covers (Mach 1 only)

Restricted exhaust system (Mach 1 & SVT Cobra models only)

Pony Edition Mustang Package introduced (V6 models only)

Final year for black-painted door lock key holes

Ford 4R75W Automatic Transmission replaces the Ford 4R70W (GT & Mach 1 models only)

Handbrake now introduced with a leather boot (All models)

2004 IIf 40th Anniversary Trim Package introduced for V6 and GT models

3.9L V6 engine replaces the 3.8L V6 engine in December 2003

V6 & GT Radios now programmed to play .MP3 files

Satellite Radio introduced for SVT Cobra & Mach 1 models

Interior overhead storage net discontinued

Silver valve covers (Mach 1 only)

1" enlarged crankshaft for 3.9L V6 engines

Polished door lock key holes

Silver center console trim introduced (optional)

TMX2 Computer System standard for Mach 1 models only

Revised shifter & exhaust system (Mach 1 and SVT Cobra only)

Anti-Lock Braking System (ABS) becomes standard

Standard, Premium & Deluxe packages offered for the V6 and GT models.

Two tone interior

edit

There is still two tone interior for 97 and 98 models. Specifically the cobra models have two tone interior options for those years — Preceding unsigned comment added by 76.177.78.1 (talk) 07:53, 30 August 2015 (UTC)Reply

edit

Hello fellow Wikipedians,

I have just added archive links to one external link on Ford Mustang (fourth generation). Please take a moment to review my edit. If necessary, add {{cbignore}} after the link to keep me from modifying it. Alternatively, you can add {{nobots|deny=InternetArchiveBot}} to keep me off the page altogether. I made the following changes:

When you have finished reviewing my changes, please set the checked parameter below to true to let others know.

This message was posted before February 2018. After February 2018, "External links modified" talk page sections are no longer generated or monitored by InternetArchiveBot. No special action is required regarding these talk page notices, other than regular verification using the archive tool instructions below. Editors have permission to delete these "External links modified" talk page sections if they want to de-clutter talk pages, but see the RfC before doing mass systematic removals. This message is updated dynamically through the template {{source check}} (last update: 5 June 2024).

  • If you have discovered URLs which were erroneously considered dead by the bot, you can report them with this tool.
  • If you found an error with any archives or the URLs themselves, you can fix them with this tool.

Cheers.—cyberbot IITalk to my owner:Online 16:20, 23 February 2016 (UTC)Reply

edit

Hello fellow Wikipedians,

I have just added archive links to 2 external links on Ford Mustang (fourth generation). Please take a moment to review my edit. If necessary, add {{cbignore}} after the link to keep me from modifying it. Alternatively, you can add {{nobots|deny=InternetArchiveBot}} to keep me off the page altogether. I made the following changes:

When you have finished reviewing my changes, please set the checked parameter below to true or failed to let others know (documentation at {{Sourcecheck}}).

This message was posted before February 2018. After February 2018, "External links modified" talk page sections are no longer generated or monitored by InternetArchiveBot. No special action is required regarding these talk page notices, other than regular verification using the archive tool instructions below. Editors have permission to delete these "External links modified" talk page sections if they want to de-clutter talk pages, but see the RfC before doing mass systematic removals. This message is updated dynamically through the template {{source check}} (last update: 5 June 2024).

  • If you have discovered URLs which were erroneously considered dead by the bot, you can report them with this tool.
  • If you found an error with any archives or the URLs themselves, you can fix them with this tool.

Cheers.—cyberbot IITalk to my owner:Online 20:56, 21 March 2016 (UTC)Reply

edit

Hello fellow Wikipedians,

I have just modified one external link on Ford Mustang (fourth generation). Please take a moment to review my edit. If you have any questions, or need the bot to ignore the links, or the page altogether, please visit this simple FaQ for additional information. I made the following changes:

When you have finished reviewing my changes, please set the checked parameter below to true or failed to let others know (documentation at {{Sourcecheck}}).

This message was posted before February 2018. After February 2018, "External links modified" talk page sections are no longer generated or monitored by InternetArchiveBot. No special action is required regarding these talk page notices, other than regular verification using the archive tool instructions below. Editors have permission to delete these "External links modified" talk page sections if they want to de-clutter talk pages, but see the RfC before doing mass systematic removals. This message is updated dynamically through the template {{source check}} (last update: 5 June 2024).

  • If you have discovered URLs which were erroneously considered dead by the bot, you can report them with this tool.
  • If you found an error with any archives or the URLs themselves, you can fix them with this tool.

Cheers.—cyberbot IITalk to my owner:Online 02:07, 19 April 2016 (UTC)Reply

edit

Hello fellow Wikipedians,

I have just modified 5 external links on Ford Mustang (fourth generation). Please take a moment to review my edit. If you have any questions, or need the bot to ignore the links, or the page altogether, please visit this simple FaQ for additional information. I made the following changes:

When you have finished reviewing my changes, you may follow the instructions on the template below to fix any issues with the URLs.

This message was posted before February 2018. After February 2018, "External links modified" talk page sections are no longer generated or monitored by InternetArchiveBot. No special action is required regarding these talk page notices, other than regular verification using the archive tool instructions below. Editors have permission to delete these "External links modified" talk page sections if they want to de-clutter talk pages, but see the RfC before doing mass systematic removals. This message is updated dynamically through the template {{source check}} (last update: 5 June 2024).

  • If you have discovered URLs which were erroneously considered dead by the bot, you can report them with this tool.
  • If you found an error with any archives or the URLs themselves, you can fix them with this tool.

Cheers.—InternetArchiveBot (Report bug) 16:37, 3 October 2017 (UTC)Reply

Notchback vs Hatchback

edit

“A convertible returned, but the previous notchback and hatchback bodystyles were discontinued in favor of a single fastback coupe bodystyle.”

I suggest either correcting this or removing altogether. The canopy might have been a bit longer in the back than the previous generation, but it still not a fastback as the rear is not a hatch and drops down forward of the trunk. Tremorlok (talk) 07:27, 2 September 2021 (UTC)Reply


You are right. The SN-95 is in no way a fastback.

Performance change for 1999

edit

The article does not mention this except saying the 4.6L was upped to 260hp. No reason given but I can tell you. The 1999+ 4.6L was referred to as the PI (Power Improved) and was two changes, the new PI cylinder heads raised the compression a small amount, received changes in port shape and also featured better heat dissipation. The new intake manifold highlighted a more durable design (96-98 intakes were prone to cracking) as well as increased runner length and size. The combination of the two, heads and intake, resulted in the 35 HP increase. 67.140.232.183 (talk) 06:27, 5 July 2022 (UTC)Reply