Talk:Handcar

Latest comment: 2 years ago by Klbrain in topic Merger proposal

Handcar = "Gandy dancer"?

edit

I seem to recall these handcars also being known as "gandy-dancers". Does anyone else remember this? Or is my memory making things up again? --Badger151 04:46, 26 July 2006 (UTC)Reply

I do not think that handcars or the people who operate them were ever called "gandy dancers" in the US. I grew up near a railroad track and knew a lot of people who worked on it. The only way that I ever heard "gandy dancer" used was to refer to the men who laid the tracks and specifically those who hammered the stakes into the ties. In the handcar article itself under Modern Usage, I consider the parenthetic reference to gandy dancers to be incorrect, or at best misleading. RoseHawk (talk) 22:02, 17 April 2016 (UTC)Reply

Take a look at this article. oTHErONE (Contribs) 11:08, 6 October 2006 (UTC)Reply
This may well be another UK/US terminology thing. I was aware of the phrase being used to describe what is here called a handcar in the UK railway modelling press. I was not aware that the term was used to describe a ganger (worker in a track gang), as in gandy dancer.
A major manufacturer (can't remember which, sorry) started producing a motorised ready-to-run HO model of a pump trolley, complete with two gangers. This was a few years ago, but my mind is convincing me that it was known as a gandy dancer at the time.
EdJogg (talk) 01:32, 20 February 2008 (UTC)Reply
This is explained at [1]. The 2 or 4 men pumping the handles look like they are geese (ganders) doing a square dance. Edison (talk) 00:53, 29 March 2010 (UTC)Reply

How do they work?

edit

The article doesn't explain how push trolleys work. Someone should add that. 68.6.88.47 (talk) 20:46, 6 April 2012 (UTC)Reply

Speed and ease of use?

edit

How fast were they if there was a slight slope - let's say 1% - upwards? — On flat ground, one could keep a relatively high "cruising speed"? 10 kmh? 30 kmh? 60 kmh? — Was it common with more than one gear ratio to make it easier/possible to climb slopes without getting off and push? — It is easy to get anything on steel wheels rolling on flat rails, but I guess handcars were much heavier than normal bicycles, and since I have no idea about the gear ratio(s) I don't know if the people had to get off and push it if the rails went more or less uphill.

This article needs much more details because modern people may possibly know more about jet engines than they do about handcars. Of course the answers to the above questions depends on the people powering them so there can not be exact answers, but it should be possible to give some typical figures. I assume that modern handcars are being made, possibly of modern light materials, but I think info on old-fashioned handcars are more important because they were of importance in their time, not just a plaything.
Urbanus Secundus (talk) 14:04, 28 May 2013 (UTC)Reply

Speed varied a lot depending on the design of the handcar and the strength of its user so it is difficult to speak accurately without going on a case by case basis. Since trains do not do well on slopes it is a functional requirement that all railways have a relatively gentle grade, so there is usually not much issue with slopes in any case. Mediatech492 (talk) 14:46, 28 May 2013 (UTC)Reply

An off track, on road version

edit

See Talk:Hobcart#An older version. Peter Horn User talk 01:25, 13 August 2013 (UTC)Reply

Getting it on the tracks?

edit

The article says there was one handcar for every 10 miles of track.

Was there a switch to a length of side track every 10 miles to get the handcar out of the way of a train or were these things light enough for one person to lift on and off the tracks when needed? — Preceding unsigned comment added by 23.119.204.117 (talk) 22:20, 7 February 2016 (UTC)Reply

Merger proposal

edit

The following discussion is closed. Please do not modify it. Subsequent comments should be made on the appropriate discussion page. No further edits should be made to this discussion.


 
Formal request has been received to merge: Rail push trolley into Handcar; dated: 2 April 2021. Proposer's Rationale: ...they cover the same subject. ~@81.131.132.199:. Discuss here. GenQuest "scribble" 22:05, 2 April 2021 (UTC)Reply
  • Very very weak oppose: The main issue is the confused state of this Handcar article and the lack of sourcing. It needs to be very specific that is referring to a vehicle that is pushed by people (on foot behind the contraption), what is human power driving the wheels (and what is mechanised or horse drawn). This seems to be clearly defined by Rail push trolley. This is a bit of an unsourced heaped mess if you exclude the youtube of the horse drawn vehicle (and the horse's refusal to cross the bridge ... sort of reminded me of the pony I used to work in Ireland and no way would he venture on soft ground ... unlike his replacement the litte fergie who would often be up to its rear axles in some bog or other!). If a decent merge job is done I'd support the merge though but I'd want a better job than the current article. While I'm at in I seem to remember there is a city in the Far Fast, maybe Vietnam, maybe Bangkok, it in Manila, Philipines hand push trolleys are currently used commercially on an "independent taxi" basis (albeit unauthorized) over tracks operated by suburban trains; and that doesn't seem present at all here.Djm-leighpark (talk) 19:32, 3 April 2021 (UTC) Djm-leighpark (talk) 20:02, 3 April 2021 (UTC)Reply
  • Strong support: The Handcar article states that a hand car is powered by its passengers, or by people pushing the car from behind. The merged article can have all of the information from Rail push trolley, along with citations. To be honest, I don't care what the article is called. Both cover the same type of vehicle, though the Handecar article states, correctly, that it is used for passenger service in some cases. In the 1970s Handcars were used by the S&T department, where I used to work, to move equipment.

2A00:23C6:3B82:8500:CD77:16CB:2DDE:278 (talk) 20:21, 5 April 2021 (UTC)Reply

  • Strong support: Since the two cannot effectively be split into two stand alone articles. That being said, a contributor will need to conduct some serious research to rewrite an article with citations. The present history has a very North American flavour. I would suggest that this should be more international, and specific North American content be relegated to a separate section. Perhaps one of our contributors with access to a local library holding a solid selection of non-North American literature on the subject would use such a resource as a foundation for a rewrite. If then necessary, later contributors can add more on-line sources and beef up a revised North American content. DMBanks1 (talk) 15:29, 17 April 2021 (UTC)Reply
The discussion above is closed. Please do not modify it. Subsequent comments should be made on the appropriate discussion page. No further edits should be made to this discussion.
    Y Merger complete. Klbrain (talk) 16:14, 4 June 2022 (UTC)Reply