Talk:Hoist controller
This article is rated Stub-class on Wikipedia's content assessment scale. It is of interest to the following WikiProjects: | ||||||||||||||||||
|
This page seems entirely wrong
editIt would seem to me that a hoist controller is the control device for a hoist, and that most of the content here belongs in the mine hoist subsection of the hoist (device) page.
The material here on bell codes may warrant a second page, but until it is fully developed, it probably only warrants a pragraph in the section on mine hoists.
I have seen bell-code tables from several mining districts, and a collection of them would be interesting, instead of just one South African example.
Text left over from an older version of this page
editIn the mining sector in South Africa, the action of raising and lowering persons or material is facilitated, by means of an onsetter(person)underground (on a certain landing level) and a Banksman(person), working on the shaft-bank area. These persons communicate with the Winding Engine Driver(WED) by signalling on a locked bell system. These signals are interpreted by the WED as to what action is needed by the Onsetter and Banksman with regard to the movement of the conveyance(s). For example: The banksman will signal 1(one) to the WED and then the WED will control the machine in such a way that the conveyance will be raised at the shaft bank. The tone of the signal will differ from that of the onsetter, so that the driver will know from whom the signal is coming. There are many different signals rung in sequence. Each signal will have a different meaning to the WED. There are signals for raising, lowering, raising slowly, lowering slowly. A signal which informs the WED that the conveyance is clear and that the WED may proceed to perform whatever action He/She wants to perform at His/Her discretion. There are also signals informing the WED of what contents the conveyance is transporting, persons, material, explosives, long material attached to the bottom of the conveyance etc. These signals are standardised on all mines in South Africa, and have been approved by the government mining engineer (a person appointed by the minister of minerals and energy affairs). These signals are known as the Government Code of Signals. Special signals for a specific mine have to be approved by the regional director (an inspector of machinery appointed by the minister of minerals and energy affairs) and can only be used once approved. No other signals than these signals are allowed.
External links modified
editHello fellow Wikipedians,
I have just modified one external link on Hoist controller. Please take a moment to review my edit. If you have any questions, or need the bot to ignore the links, or the page altogether, please visit this simple FaQ for additional information. I made the following changes:
- Added archive https://web.archive.org/web/20110717001422/http://files.asme.org/ASMEORG/Communities/History/Landmarks/5631.pdf to http://files.asme.org/ASMEORG/Communities/History/Landmarks/5631.pdf
When you have finished reviewing my changes, you may follow the instructions on the template below to fix any issues with the URLs.
This message was posted before February 2018. After February 2018, "External links modified" talk page sections are no longer generated or monitored by InternetArchiveBot. No special action is required regarding these talk page notices, other than regular verification using the archive tool instructions below. Editors have permission to delete these "External links modified" talk page sections if they want to de-clutter talk pages, but see the RfC before doing mass systematic removals. This message is updated dynamically through the template {{source check}}
(last update: 5 June 2024).
- If you have discovered URLs which were erroneously considered dead by the bot, you can report them with this tool.
- If you found an error with any archives or the URLs themselves, you can fix them with this tool.
Cheers.—InternetArchiveBot (Report bug) 19:32, 5 November 2017 (UTC)
Pendant controller
editThe handheld controllers which are usually suspended from the hoisting device are widely known as pendant controllers Everybody got to be somewhere! (talk) 23:25, 14 October 2019 (UTC)