Talk:Multifaceted reflector

Latest comment: 2 years ago by FletcherD in topic Why the facets?

Why the facets?

edit

This article doesn't mention at all why the reflectors are faceted instead of a smooth parabolic reflector. Is it possible for someone to describe the advantages of this arrangement? FletcherD (talk) 08:27, 2 November 2022 (UTC)Reply

MR11 basing

edit

The article currently says:

MR11 and MR8 lamps have pins placed more closely together, preventing them from accidentially being interchanged with MR16 lamps.

Brianpirie, are you sure about that? I'm almost certain I've operated MR11 lamps in a socket that was intended for MR16 lamps.

Atlant 13:42, 9 January 2007 (UTC)Reply


MR11 and MR8 lamps typically have a G4 base with a 4mm pin spread while MR16 lamps have a GX5.3 with a 5.33mm spread between the two round pins. You could possibly force one into a socket made for another.

Today, MR16 lamps come in a very wide variety of bases including E26, Gx5.3, GU5.3,G8, GU10, GY7.9 and I am sure others. Manufacturers are constantly adapting lamps to new bases and introducing new ones. I would be uncomfortable claiming that certain lamp shapes only come with certain bases, there are just too many out there to make that kind of statement.

Wikipedia has a section on lightbulb sockets and specifically bi-pin connectors. Perhaps this should be included in the article[1]

Tsadowski (talk) 07:45, 23 February 2014 (UTC)Reply

References

Filament temp

edit

"The combination of the halogen light source and dichroic coating also means that these lamps provide a high color rendering index and a higher color temperature than standard incandescent bulbs."

higher CCT is due to the higher filament temp of halogen lamps. Halogens don't have higher CRI than non-halo filaments, both are apx 100. The dichroic coating doesnt have much effect on either, though if any effect, it can reduce CRI just a little. Tabby (talk) 01:52, 15 February 2008 (UTC)Reply

Dichroic reflectors

edit

The statement about never using dichroic lamps in recessed lighting appears to be an over-generalization:

"Dichroic lamps, however must never be used in recessed lighting as they are a common ignition source for building fires."

Virtually all recessed fixtures sold in the U.S. have thermal protection (per the Underwriters Laboratories voluntary standards), and manufacturers have not restricted their MR16 recessed fixtures to non-dichroic lamps (e.g., Philips/Lightolier and Cooper Lighting/Halo). Additionally, the IEC 60598 labeling on MR16 packaging does not appear to be used in the U.S. Apparently that designation is for products sold elsewhere, such as Australia and EU countries. Caseyjonz (talk) —Preceding undated comment added 04:44, 1 March 2010 (UTC).Reply

Time passes

edit

Is this to-day or yesterday?

The most efficient of these lamps available today produce about 70 lm/W, which exceeds the efficiency of compact fluorescent lamps.

Bad smells

edit

This seems rather unencyclopaedic

the smell can be as pleasant as toast or as bad as having a nearby oil refinery — Preceding unsigned comment added by 86.23.47.157 (talk) 10:38, 27 December 2011 (UTC)Reply

Is "Multifaceted Reflector" a backronym?

edit

The article says that the MR16 was first sold in 1965, but that those lamps weren't faceted. That implies that, if they were called "MR16" at the time that the "M" didn't mean "multifaceted", and that "MR" is a backronym. Or, that they were called something besides MR16s, and we should say what that was. Any idea which would be true? -- Dan Griscom (talk) 11:41, 29 June 2013 (UTC)Reply


Actually the original patent US patent #4021659 by Emmett Wiley Filed October 30, 1975, is based on the principle of the reflector being multifaceted. The lamp was not called an MR16 in the patent but it is obvious by the patent drawings that this was destine to become what is known as the MR16. The patent was filed in 1975 and the article states that MR-16 were sold first in 1965. The error in the article must be that whatever lamps were sold in 1965 were not called MR16s. MR is not a "Backronym" it's just that whatever lamps were sold prior to the introduction of MR16's were not MR16s. patent reference: [1] Tsadowski (talk) 17:13, 21 February 2014 (UTC)Reply

Reflector sizes vs. pin configurations

edit

From Design and construction:

"Halogen MR16 lamps consist of a halogen capsule (bulb) integrated with a pressed glass reflector. The reflector of an MR16 lamp is 2 inches (51 mm) in diameter. The base conforms to bi-pin GU5.3 standard."

This last part is incorrect, or at least, incomplete. Low-voltage (12 V) MR16 lamp bases have the GU5.3 bi-pin configuration, but mains-voltage MR16s have the GU10 twist-lock bi-pin configuration.

RedGreenInBlue (talk) 10:52, 29 October 2013 (UTC)Reply


Base type is independent of voltage. 120 volt MR16 are available in both GU5.3 bi-pin and GU10 bases. Low voltage MR16's are also available in either base. A quick look at lighting catalogs on the web will confirm this. MR16 lamps are available in (at least) 5 different bases[1] Tsadowski (talk) 17:58, 21 February 2014 (UTC)Reply

Operation

edit

Under "operation" the article states: "MR16 lamps are available in 10–50 W power ratings (150–800 lumens)." Actually MR16 lamps are available to at least 300 watts as an ELH MR16 (rated at 300 watts at 120 volts), which has applications in stage and studio. The lamps were originally developed as projector lamps which had to have a high light output and consequently high wattage. See US patent #4021659.Tsadowski (talk) 16:58, 21 February 2014 (UTC)Reply

ANSI designations

edit

I suggest citing the Lighting Research Center [1] to support the Beam Angle Nomenclature. Tsadowski (talk) 18:09, 21 February 2014 (UTC)Reply

edit

Hello fellow Wikipedians,

I have just modified one external link on Multifaceted reflector. Please take a moment to review my edit. If you have any questions, or need the bot to ignore the links, or the page altogether, please visit this simple FaQ for additional information. I made the following changes:

When you have finished reviewing my changes, you may follow the instructions on the template below to fix any issues with the URLs.

This message was posted before February 2018. After February 2018, "External links modified" talk page sections are no longer generated or monitored by InternetArchiveBot. No special action is required regarding these talk page notices, other than regular verification using the archive tool instructions below. Editors have permission to delete these "External links modified" talk page sections if they want to de-clutter talk pages, but see the RfC before doing mass systematic removals. This message is updated dynamically through the template {{source check}} (last update: 5 June 2024).

  • If you have discovered URLs which were erroneously considered dead by the bot, you can report them with this tool.
  • If you found an error with any archives or the URLs themselves, you can fix them with this tool.

Cheers.—InternetArchiveBot (Report bug) 08:00, 1 January 2017 (UTC)Reply

edit

Hello fellow Wikipedians,

I have just modified one external link on Multifaceted reflector. Please take a moment to review my edit. If you have any questions, or need the bot to ignore the links, or the page altogether, please visit this simple FaQ for additional information. I made the following changes:

When you have finished reviewing my changes, you may follow the instructions on the template below to fix any issues with the URLs.

This message was posted before February 2018. After February 2018, "External links modified" talk page sections are no longer generated or monitored by InternetArchiveBot. No special action is required regarding these talk page notices, other than regular verification using the archive tool instructions below. Editors have permission to delete these "External links modified" talk page sections if they want to de-clutter talk pages, but see the RfC before doing mass systematic removals. This message is updated dynamically through the template {{source check}} (last update: 5 June 2024).

  • If you have discovered URLs which were erroneously considered dead by the bot, you can report them with this tool.
  • If you found an error with any archives or the URLs themselves, you can fix them with this tool.

Cheers.—InternetArchiveBot (Report bug) 17:56, 20 September 2017 (UTC)Reply

edit

Hello fellow Wikipedians,

I have just modified one external link on Multifaceted reflector. Please take a moment to review my edit. If you have any questions, or need the bot to ignore the links, or the page altogether, please visit this simple FaQ for additional information. I made the following changes:

When you have finished reviewing my changes, you may follow the instructions on the template below to fix any issues with the URLs.

This message was posted before February 2018. After February 2018, "External links modified" talk page sections are no longer generated or monitored by InternetArchiveBot. No special action is required regarding these talk page notices, other than regular verification using the archive tool instructions below. Editors have permission to delete these "External links modified" talk page sections if they want to de-clutter talk pages, but see the RfC before doing mass systematic removals. This message is updated dynamically through the template {{source check}} (last update: 5 June 2024).

  • If you have discovered URLs which were erroneously considered dead by the bot, you can report them with this tool.
  • If you found an error with any archives or the URLs themselves, you can fix them with this tool.

Cheers.—InternetArchiveBot (Report bug) 03:13, 8 February 2018 (UTC)Reply

Nonsense or real MR in 1965

edit

The MR16 lamp was first sold in 1965.

... Note that this lamp was not "multifaceted"; faceted reflectors were introduced in 1971.

So WTF? --2003:F2:8701:E641:1841:BEE9:C60D:1F5B (talk) 21:56, 10 August 2021 (UTC)Reply