Talk:Pellet fuel

Latest comment: 1 year ago by Clayoquot in topic Proposed change to the first sentence


edit

Wikipedia is not a site for commercial links wp:links Statsone 16:18, 23 March 2009 (UTC)Reply

Grey energy

edit

This article lacks fundamental information about the grey energy content of the pellets (the energy needed to manufacture the pellets). Unfortunatelly, I don't have the info so please help out. --TomTompa 14:04, 22 October 2006 (UTC)Reply

Here are some estimates from 1995
csfs.colostate.edu/cowood/library/06_Wood_Pellets_Walden.pdf
It appears that the actual mechanical creation of the pellets, like most other areas of wood processing, hace fairly low energy costs -- certainly far, far less than the energy available from burning the pellets. Alas, unless your wood needs no drying and your source of wood and customers are both next door, drying and transportation costs must be factored in. Both are extremely variable and would have to be calculated on a case-by-case basis. 67.150.10.100 (talk) 20:01, 19 December 2009 (UTC)Reply

Most pellet manufacturers use saw dust from the pellet production process to dry the pellets. Delivery is like anything else you need to put fuel in the trucks and in the chainsaws for that matter. The energy density of pellets is not as high as oil, so delivery energy plays a larger role. — Preceding unsigned comment added by Nineteen85EAGLE (talkcontribs) 14:21, 20 July 2011 (UTC)Reply

MBTU/ton

edit

While MWh does mean mega(million)-watthours, MBTU is sometimes read as thousand-BTU. To refer to million-BTU, the abbreviation MMBTU is used to avoid confusion. See British_thermal_unit.

Re the suggested nerger: It may be better to combine the wood pellets with data on wood chips as fuel, and keep a separate page for equipment burning wood pellets/chips. In Europe, particularly Sweden, heater manufacturers supply equipment for burning either pellets (made from compressed sawdust) or wood chips. Wood pellets are useful for making use of what might otherwise be waste from wood products manufacture, and are usually dry, so they burn well. As noted above, wood pellets carry a significant energy cost if wood is ground to powder and dried specifically for pellet manufacture E.g. One manufacturer indicates up to 20% of sawdust is burned to dry the remaining sawdust. Wood chips are therefore a very practical option which avoids the unnecessary steps of grinding the wood and then compacting or extruding to form pellets. —Preceding unsigned comment added by 141.243.60.11 (talk) 06:12, 29 October 2007 (UTC)Reply

Bias in Environmental Impact

edit

This article does not present a neutral discussion of the environmental impact of burning wood pellets. The author's viewpoint clearly favors their burning and dismisses the legitimate concerns of the side who believes there are environmental concerns. That section should be revised to present a neutral stance on the issue. Barring any comments, my edit would be to remove the "justification" about the carbon cycle and simply include the links to the outside articles on this topic.

Written like an advertisement.

edit

Wow, reading this article I am left to believe that wood pellets are the most perfectest pieces of technological innovation ever. Really? People can't even write articles about unimportant things like hairbrushes or scented candles without listing unperfect characteristics and yet wood pellets have no problems? Whatsoever? Except maybe C02 emissions? Yeah I think article was written by someone with a stake in wood-pelletism. -I agree. Disadvantages are pellets are more expensive per BTU than other fuels in some markets, the initial cost of the burner is high, and the burner may malfunction if you attempt to burn wood chips, coal dust, shredded paper and/or sawdust in it. Ccpoodle (talk) 20:42, 7 March 2009 (UTC)Reply

Wood pellets and global warming.

edit

I have noted that certain editors have taken exception to the fact that pellets are produced from sawdust, and that combustion of sawdust, releasing carbon dioxide with a GWP100 of 1, is less contributive to global warming than allowing sawdust to decay, producing methane, with a GWP100 of 25.

If these editors can prove that combustion of sawdust (in pellet form) is more contributive to global warming than sawdust decay, surely they have evidence to back their claims. And surely they have evidence to back their claims that the carbon neutrality of wood pellets harvested from sustainablely managed forests is carbon positive, or the carbon balance of properly controlled biomass combustion using sustainable biomass waste sources is somehow under dispute. Who's disputing it? A coal trafficker? An oil dealer? Katana0182 (talk) 03:24, 30 April 2009 (UTC)Reply

I don't think editors have argued that combustion of sawdust contributes more to global warming than 100% biological decay of sawdust. Instead, some (like I) have simply taken away claims that burning wood is net carbon negatives - I would like to see the burden of proof on the claims made in the article, not on the assumed ideas of people taking away unsourced claims.
This claim about sawdust has a variety of issues. First, is all sawdust left to decay, or is it used in other applications in which its carbon is not released to the atmosphere? Second, over what time horizon does it decay? Obviously carbon released to the atmosphere in 30 years is better than carbon released today. Finally, does it decay completely? Is 100% of its carbon released to the atmosphere? Of course not. But because no one is writing scathing critiques of sawdust combustion, just trying to take away totally inaccurate claims that burning sawdust is carbon negative, the burden of proof is on those who claim it is. I am disputing the claims about wood pellet burning, and I work at an environmental conservation nonprofit, not a coal company. —Preceding unsigned comment added by 65.104.157.243 (talk) 13:26, 30 April 2009 (UTC)Reply
I agree with your statement about a good part of the carbon of decaying sawdust not being released into the atmosphere; some would stay in place and be fixed. The question is how much? If, say 75% of the carbon in the sawdust is fixed, and the other 25% is converted into methane and released, would that be better than 100% of the sawdust being released as carbon dioxide? Or the sawdust could be converted into particle board and its carbon could be permanently fixed. Some research on these issues may provide an answer.
But the statements were previously in the article like "Wood pellet combustion gives off large amounts of carbon dioxide and contributes massively to global warming" are pretty silly too - because if the wood is harvested from a sustainably managed forest, the forest, in the process of growing back, will take back the carbon emitted by combustion, leading to a short term GWP but a long term GWP of 0. There is, of course, the issue of grey energy (the carbon emissions of the means to transport and manufacture the pellets) - which needs to be quantified. But calling pellets practically a fossil fuel is really a step too far. Better to describe them as a very low net carbon renewable fuel.
I appreciate the effort to dialogue, and apologize for my previous snide remarks. Katana0182 (talk) 08:34, 16 May 2009 (UTC)Reply
I think the text of the section on carbon emissions has been substantially improved and set on a reasonably factual and cautious basis that recognizes concerns about inappropriate use of biomass, while recognizing the carbon benefits of appropriate use of biomass in general. I'm going to remove the uncited tag, if anyone feels that the section needs improvement, by all means, be bold. Katana0182 (talk) 06:37, 23 May 2009 (UTC)Reply

Biomass

edit

It seems to me that a large portion of this article belongs in the article on biomass. Unless the information is specific to wood pellets as opposed to any use of biomass waste wood, it should be in the biomass article and referenced from this article. Does anyone here disagree? 67.150.10.100 (talk) 20:39, 19 December 2009 (UTC)Reply

i agree, there is a lot of bloat with material being drawn in to support arguments. I have done some pruning but more would be appropriate, however editing should be cautious because of some contention. David Woodward ☮ ♡♢☞☽ 01:43, 9 July 2011 (UTC)

Changes on 27 August 2011

edit

I share the concerns above expressed by many others, and have tried to add some balance to the article. It still needs a lot of work in that regard. Also, I have flagged the many places were citations are needed. — Preceding unsigned comment added by Coastwise (talkcontribs) 02:45, 28 August 2011 (UTC)Reply

Tagging every sentence with 'citation needed' was not constructive: the article already had a banner stating it needs more citations. 66.87.0.128 (talk) 21:17, 24 November 2011 (UTC)Reply
I find the high number of 'citation needed' looks to me like vandalism by an editor. I've done my bit to remove some. Dougmcdonell (talk) 15:05, 3 December 2011 (UTC)Reply

Move

edit

Pellet fuels are not just made of wood, they can also be made from straw, hay/grass, etc. Propose a move to pellet fuel --Kevlar (talkcontribs) 21:22, 18 January 2013 (UTC)Reply

Is there another name that would work? The new title doesn't work for the section that discribes wood pellets made for horse bedding. (I tried to reply a couple of months ago, but wikipedia was blocking edits by all Sprint customers for some reason) 108.113.136.116 (talk) 22:32, 29 March 2013 (UTC)Reply

EU usage table

edit

I updated the EU usage numbers. I believe the source has a typo in the Sweden number. The countries are in order of usage and the given figure of 650 does not fit in between the Netherlands and Germany. It looks like a '1' was dropped and the figure should have been 1,650 instead, SwineFlew? (talk) 22:58, 16 September 2013 (UTC)Reply

handling/transport hazards, explosion, carbon monoxide

edit

Apparently there are regular dust explosion at pellet plants And outgassing / oxygen depletion / carbon monoxide generation .... info needs incorporating :) http://www.pellet.org/images/2010-02-26_Review_of_Off-gassing_from_Wood_Pellets.pdf http://www.mardep.gov.hk/en/publication/pdf/mai061116_f.pdf https://www.youtube.com/watch?v=bL8p413ECQc The Lethal Dangers of Wood Pellets — Preceding unsigned comment added by 75.51.147.76 (talk) 11:30, 17 May 2015 (UTC)Reply

edit

Hello fellow Wikipedians,

I have just modified one external link on Pellet fuel. Please take a moment to review my edit. If you have any questions, or need the bot to ignore the links, or the page altogether, please visit this simple FaQ for additional information. I made the following changes:

When you have finished reviewing my changes, please set the checked parameter below to true or failed to let others know (documentation at {{Sourcecheck}}).

This message was posted before February 2018. After February 2018, "External links modified" talk page sections are no longer generated or monitored by InternetArchiveBot. No special action is required regarding these talk page notices, other than regular verification using the archive tool instructions below. Editors have permission to delete these "External links modified" talk page sections if they want to de-clutter talk pages, but see the RfC before doing mass systematic removals. This message is updated dynamically through the template {{source check}} (last update: 5 June 2024).

  • If you have discovered URLs which were erroneously considered dead by the bot, you can report them with this tool.
  • If you found an error with any archives or the URLs themselves, you can fix them with this tool.

Cheers.—cyberbot IITalk to my owner:Online 01:43, 27 May 2016 (UTC)Reply

Are the figures in ton or tonne ? Use of non-SI metric units

edit

When I read in the "Cost" section "... BTU equivalent: 1 ton pellets = 118.97 gallon of #2 Fuel Oil" I was at first convinced that the "ton" stood for "metric ton" or "tonne" (=1000 kg). But by putting it in context with the "gallons", it probably is the US ton that is meant here? Given that "ton" can represent at least 3 different units, using it in an article is very confusing.

Moreover, in the sections "Europe" and "New Zealand" it is not clear at all what type of "ton" is meant here. In those regions they only use the SI variant, thus I doubt very much that the given figures in ton should be interpreted as US variant.

I followed the reference 58 link given for the European figures: they were originally given in "MT" which stands for "megatonne" (but should officially be spelled "Mt". MT could be interpreted as megatesla), and they were taken over without conversion to US ton (but divided by 1000 to convert from Mt to t).

My advice is to use SI-units in all Wikipedia Scientific pages as standard. Non-SI units can be added for the comfort of US-readers. But at very least it should be very clear what unit is used. In this article it is not clear at all.

--Tom.van.lint (talk) 14:23, 15 October 2017 (UTC)Reply

Proposed change to the first sentence

edit

The first sentence currently reads "Pellet fuels (or pellets) are biofuels made from compressed organic matter or biomass.[1]" I am wondering if we can change this wording (and replaced biofuel with something else) because the term biofuel is nowadays more commonly used to refer to liquid or gaseous fuels for transportation? See also at biofuel and bioenergy. - I came to this page as part of a broader effort to improve bioenergy, biomass (energy), biofuel, solid fuel and everything related to that. Courtesy ping to User:Clayoquot. Thanks. EMsmile (talk) 10:30, 24 January 2023 (UTC)Reply

Good point, I changed it. Thanks! Clayoquot (talk | contribs) 14:39, 24 January 2023 (UTC)Reply

References

  1. ^ "Biomass Energy". Alternate Energy. Retrieved 16 February 2015.

EMsmile (talk) 10:30, 24 January 2023 (UTC)Reply