|
No cladogram specified! |
 | This is the template sandbox page for Template:Barlabel (diff). |
This template is used to add labels to brackets and bars which have been added to cladograms constructed with {{clade}}.
Usage
edit- First create a cladogram using {{clade}}.
- Then embed the cladogram in this template as the value of
|cladogram=.
Example
editSuppose you have created the cladogram shown below.
| GM |
| |||||||||||||||||||||||||||
To provide labels for the two groups identified in the cladogram:
- Count the number of leaf nodes in the cladogram; here there are 7. The parameter
sizewill be set to 7. - Decide against which leaf nodes you want the labels to go. To centre the labels, the label for the green group should be opposite leaf node 3; the label for the purple group should be between leaf nodes 5 and 6, i.e. opposite leaf node "5.5". The
atparameters of the template are set to these values.
The full expression required is shown below (excluding the code to create the cladogram).
{{Barlabel
|size=7
|at1=3|label1=Group 1|bar1=green
|at2=5.5|label2=Group 2|bar2=purple
|cladogram=...
}}
This produces
|
Group 1
Group 2 |
To reduce the font size of the cladogram and its labels, use the style parameter. Thus
{{Barlabel
|style=font-size:85%
|size=7
|at1=3|label1=Group 1|bar1=green
|at2=5.5|label2=Group 2|bar2=purple
|cladogram=...
}}
produces
|
Group 1
Group 2 |
The cladogram can be aligned to the right, with text flowing around it to the left, but in this case you must specify the space allowed for the labels using the parameter labelwidth, otherwise the labels will appear off the right of the page. Trial and error may be needed, but about 60% of the number of characters in the longest label is usually a good starting point. Thus
{{Barlabel
|style=font-size:85%|align=right|labelwidth=4.5
|size=7
|at1=3|label1=Group 1|bar1=green
|at2=5.5|label2=Group 2|bar2=purple
|cladogram=...
}}
produces the cladogram on the right below.
|
Group 1
Group 2 |
The cladogram can be placed centrally on the page by specifying |align=center or |align=centre. The labelwidth parameter is needed to ensure the cladogram is centred; if it is omitted, the labels will be ignored in determining the placement. Thus
{{Barlabel
|style=font-size:85%|align=center|labelwidth=4.5
|size=7
|at1=3|label1=Group 1|bar1=green
|at2=5.5|label2=Group 2|bar2=purple
|cladogram=...
}}
produces
|
Group 1
Group 2 |
The cladogram can also be aligned left with text flowing around it to the right by using |align=left. Again the labelwidth parameter is needed, otherwise the labels will overlap the text.
(The template can be used to align cladograms without brackets/bars and labels, although {{cladogram}} offers more options for doing this.)
Parameters
editsizemust be set to the total number of leaf nodes in the cladogram, e.g.|size=23.
Up to six labels can be provided. They are identified by the digit in the name of the parameter. Each label requires three parameters, e.g. at2, label2 and bar2 for the second label. There is no connection between these numbers and the numbers used to identify child nodes in {{clade}}. The "1" can be omitted, i.e. at, label and bar are equivalent to at1, label1 and bar1.
atNdefines the position of label N in terms of position of the leaf node in the whole cladogram, starting from 1 and ending at the value ofsize. The label is placed opposite the chosen leaf node. For a label between two leaf nodes, use the average. Thus to place the first label opposite leaf node 6, use|at1=6; to place the third label opposite a point between leaf nodes 6 and 7, use|at3=6.5.labelNdefines the text of label N. Thus to give the third label the text "Group 3", use|label3=Group 3.barNdefines the colour of label N. Thus to put the second label in green text, use|bar3=green. (The namebaris consistent with {{clade}}; howevercolourNorcolorNcan be used instead.)styleThe size of the text used in the cladogram and labels can be altered by using thestyleparameter, e.g.|style=font-size:85%. Do not alter the font size in the {{clade}} template! If you do, the cladogram and the labels will not align correctly as they will be of different sizes.alignThe cladogram can be aligned centrally by specifying|align=centeror|align=centre, or to the right or left by specifying|align=rightor|align=left. The last two allow text to flow around the side of the cladogram, i.e. it is embedded in the text.labelwidthWhen using|align=, you must also specify the space allowed for the labels usinglabelwidth=number, otherwise the space occupied by the labels will be ignored in placing the cladogram. Trial and error may be needed, but about 60% of the number of characters in the longest label is usually a good starting point.
Limitations, debugging
editThe template works by constructing a hidden table. Different browsers (user agents) have different algorithms for laying out tables, so the precise alignment of the labels differs between browsers and platforms, and is not always exactly opposite the chosen leaf node. Although it's possible to 'tweak' the alignment for one browser/platform combination (e.g. by using fractional positions other than 0.5), this won't work across combinations.
The template does not check the ranges of the parameters supplied, so make sure that the values of the atN parameters are less or equal to the value of the size parameters. Label N will only be displayed if size, atN and labelN are defined. The colour of the text of the label (defined by barN, colorN or colourN) defaults to black.
Setting labelwidth is needed whenever the cladogram is aligned to the centre, right or left. This includes placing {{barlabel}} inside {{cladogram}} and aligning it to the right via that template.