Template talk:Infobox islands/Archive 2
![]() | This is an archive of past discussions. Do not edit the contents of this page. If you wish to start a new discussion or revive an old one, please do so on the current talk page. |
Archive 1 | Archive 2 |
Please add "Infobox mapframe" item
This edit request to Template:Infobox islands has been answered. Set the |answered= or |ans= parameter to no to reactivate your request. |
Hi, please add Infobox mapframe item by inserting this code:
| image4 = {{#invoke:Infobox mapframe|auto|onByDefault={{#if:{{{pushpin map|}}}|no|yes}}|mapframe-zoom={{{mapframe-zoom|7}}}|mapframe-marker=island| mapframe-marker-color=#a8bdec|mapframe-width=250|mapframe-frame-width=250}}
| caption4 = {{#invoke:Infobox mapframe|autocaption|onByDefault={{#if:{{{pushpin map|}}}|no|yes}}}}
Add it exactly after the item named image3. Thanks, Hooman Mallahzadeh (talk) 18:50, 28 November 2023 (UTC)
- Not done: please make your requested changes to the template's sandbox first; see WP:TESTCASES. Many mapframe-related parameters will need to be added to the unknown parameter check as well. You should be able to copy them from a similar template. – Jonesey95 (talk) 21:11, 28 November 2023 (UTC)
- @Jonesey95: I used the above code at Template:Infobox islands/sandbox and it works properly for these Infoboxes:
NASA satellite image of Jan Mayen, Beerenberg covered with snow | |
Geography | |
---|---|
Location | Arctic Ocean |
Coordinates | 70°59′N 8°32′W / 70.983°N 8.533°W |
Area | 377 km2 (146 sq mi) |
Coastline | 124,100 m (407200 ft) |
Highest elevation | 2,277 m (7470 ft) |
Highest point | Beerenberg |
Administration | |
Unincorporated area | Jan Mayen |
Largest settlement | Olonkinbyen (pop. 35) |
Demographics | |
Population | 0 (up to 35 non-permanent residents) |
Additional information | |
Time zone | |
• Summer (DST) | |
Postal code | 8099 |
ISO 3166 code | SJ |
Native name: قشم | |
---|---|
Qeshm from space, August 2000 | |
Map of Qeshm Island and surroundings, in French | |
Geography | |
Location | Strait of Hormuz |
Coordinates | 26°41′43″N 55°37′06″E / 26.69528°N 55.61833°E |
Area | 1,491 km2 (576 sq mi) |
Length | 135 km (83.9 mi) |
Width | 40 km (25 mi) |
Administration | |
Province | Hormozgān |
County | Qeshm |
Bakhsh | Central |
Largest settlement | Qeshm (pop. 40,678) |
Demographics | |
Population | 148,993 (2016) |
Pop. density | 67.07/km2 (173.71/sq mi) |
No parameters need to be added the same as in other usages of this code, for example in Template:Infobox waterfall and the red line indicators are appeared in the original article because it refers to the WikiData item to recognize the correct map of it. Thanks,
- Notice when you preview these infoboxes, you see "Preview warning: Page using Template:Infobox islands with unknown parameter "mapframe-zoom"". You'll get the same error with {{infobox waterfall}}; it turns out to be a bad example to copy from. See the documentation at Module:Infobox mapframe for what needs to be added to the unknown parameter check at the bottom of the template code. – Jonesey95 (talk) 05:39, 29 November 2023 (UTC)
- @Jonesey95: We don't need the parameter "mapframe-zoom" for this template at all, and this error message has been removed in my new edition of this template usages, i.e. the first line of these usages are removed. In fact, by inheritance law, this parameter is inherited to the "Module:Infobox mapframe". This parameter is not required for the template, but if we use it, it would inherit to this module invoking. Hooman Mallahzadeh (talk) 05:59, 29 November 2023 (UTC)
- @Jonesey95 Sorry! The problem resolved this way. Thanks, Hooman Mallahzadeh (talk) 06:58, 29 November 2023 (UTC)
- @Jonesey95 At least in Arabic and Persian, these codes that produce map are used. English does need it too. Hooman Mallahzadeh (talk) 07:57, 29 November 2023 (UTC)
- The above makes little sense, but I have implemented this edit request, along with the parameters necessary to make the unknown parameter check work properly. – Jonesey95 (talk) 13:29, 29 November 2023 (UTC)
- @Jonesey95 Again like our discussion in Template:Infobox zoo and in Template_talk:Infobox_mapframe#Default_value_for_mapframe-wikidata_parameter about "default behavior of displaying red lines in the map", I really suppose to add this parameter
| mapframe-wikidata = {{{mapframe-wikidata|yes}}}}}
- This way it shows red lines by default, unless we unable it. Thanks again, Hooman Mallahzadeh (talk) 05:20, 30 November 2023 (UTC)
- As with that discussion, I don't understand what you are saying, or what you are asking for. Please link to some example pages that illustrate a problem or something that you want to change. – Jonesey95 (talk) 05:39, 30 November 2023 (UTC)
- @Jonesey95 For example in the article "قشم" in Persian Wikipedia, and in the Infobox part, there exists a map which has red colored island border indicators, but in its English edition (which is "Qeshm") and in the Infobox part and in the fourth image (map) from top (the last one), there exists a map in which red colored island border indicators are not shown.
- This happens because the default value of showing border of islands is set to "no". The above code (parameter) changes the default value to "yes". Hooman Mallahzadeh (talk) 06:59, 30 November 2023 (UTC)
- Thanks for the link. I have added the above setting to the code and fixed the code pasted above so that the #if test for
|pushpin_map=
actually works. – Jonesey95 (talk) 15:52, 30 November 2023 (UTC)- @Jonesey95 Thank you Your edit seems reasonable. Hooman Mallahzadeh (talk) 16:57, 30 November 2023 (UTC)
- @Jonesey95 After a few days, I found that your edit is not good. In fact, "pushin maps" and Mapframe are used for different purposes.
- Pushin_Map display the location of island from a country or in a continent or the world.
- Mapframe is used to show the inside map of an island
- So, they are used for totally different purposes. One is for outside of an island and the other is used for inside of an island. Therefore, exclusive usage of them (as your code displays them exclusively) is not correct.
- Non exclusive usage is used for example in Tehran article, and in its Infobox, both of "mapframe map" and "pushin map" are used together to show different aspects of a city. Thanks, Hooman Mallahzadeh (talk) 08:47, 4 December 2023 (UTC)
- I simply implemented your proposed edit, after fixing a typo. – Jonesey95 (talk) 13:59, 4 December 2023 (UTC)
- @Jonesey95 No, your edit implements "show pushin or mapframe exclusively". This is not correct becuase it is exclusive. The correct code will be:
| image4 = {{#invoke:Infobox mapframe|auto| onByDefault={{#if:{{{map|}}}{{{map_image|}}}|no|yes}}|mapframe-zoom={{{mapframe-zoom|12}}}|mapframe-marker=zoo|mapframe-marker-color= #008000 |mapframe-width=250|mapframe-frame-width=250| mapframe-wikidata = {{{mapframe-wikidata|yes}}}}} | caption4 = {{#invoke:Infobox mapframe|autocaption|onByDefault={{#if:{{{pushpin map|}}}|no|yes}}}}
- Exacly taken from Template:Infobox zoo. Some codes in if statement is redundant here. Please correct that. Hooman Mallahzadeh (talk) 16:41, 4 December 2023 (UTC)
- That code is clearly broken. The if statements in the two lines test for different parameters, and
|pushpin map=
is not valid. Can you please test your code in the sandbox? – Jonesey95 (talk) 16:50, 4 December 2023 (UTC)- @Jonesey95 The correct code is sandboxed at: Template:Infobox islands/sandbox
- I have tested it at Qeshm Island by temporarily changing the main template to sandbox version of it, in this article. Hooman Mallahzadeh (talk) 17:18, 4 December 2023 (UTC)
I don't see a "Location in..." autocaption there, andthe code is still wrong as I described above. Please continue testing. (Edited to add: I am not sure that autocaption works anywhere. I have copied the live template code to the sandbox, which is the first step before adjusting the sandbox. Please continue testing from that point.) – Jonesey95 (talk) 17:28, 4 December 2023 (UTC)
- That code is clearly broken. The if statements in the two lines test for different parameters, and
- I simply implemented your proposed edit, after fixing a typo. – Jonesey95 (talk) 13:59, 4 December 2023 (UTC)
- @Jonesey95 After a few days, I found that your edit is not good. In fact, "pushin maps" and Mapframe are used for different purposes.
- @Jonesey95 Thank you Your edit seems reasonable. Hooman Mallahzadeh (talk) 16:57, 30 November 2023 (UTC)
- Thanks for the link. I have added the above setting to the code and fixed the code pasted above so that the #if test for
- As with that discussion, I don't understand what you are saying, or what you are asking for. Please link to some example pages that illustrate a problem or something that you want to change. – Jonesey95 (talk) 05:39, 30 November 2023 (UTC)
- The above makes little sense, but I have implemented this edit request, along with the parameters necessary to make the unknown parameter check work properly. – Jonesey95 (talk) 13:29, 29 November 2023 (UTC)
- @Jonesey95 At least in Arabic and Persian, these codes that produce map are used. English does need it too. Hooman Mallahzadeh (talk) 07:57, 29 November 2023 (UTC)
- @Jonesey95 Sorry! The problem resolved this way. Thanks, Hooman Mallahzadeh (talk) 06:58, 29 November 2023 (UTC)
- @Jonesey95: We don't need the parameter "mapframe-zoom" for this template at all, and this error message has been removed in my new edition of this template usages, i.e. the first line of these usages are removed. In fact, by inheritance law, this parameter is inherited to the "Module:Infobox mapframe". This parameter is not required for the template, but if we use it, it would inherit to this module invoking. Hooman Mallahzadeh (talk) 05:59, 29 November 2023 (UTC)
Incorrect parameter check
Jonesey95 and Hooman Mallahzadeh, in the November 2023 Mapframe implementation, the following check is incorrect:
onByDefault={{#if:{{{pushpin_map|}}}{{{map|}}}|no|yes}}
There is no {{{map}}}
parameter used by this template. Instead, the check should have been for {{{image_map}}}
and its alternative {{{map_image}}}
. --Paul_012 (talk) 07:27, 22 February 2024 (UTC)
|map=
is a valid parameter in this template. It is an alias of|pushpin_map=
. It appears that there are four valid map parameters in this template:|image_map=
or|map_image=
is passed to the infobox's|image2=
parameter, and|pushpin_map=
or|map=
is passed to the infobox's|image3=
parameter.- Did you write the above message because something is not working as expected? If so, please link to a page where the infobox is not working and explain how it should work instead. – Jonesey95 (talk) 15:45, 22 February 2024 (UTC)
- Sorry, I was looking at the documentation and forgot to check the template source. My suggestion was prompted by the infobox at New Guinea, which in addition to an already existing image map, now shows a redundant Mapframe map (that is also totally useless due to the wholly inappropriate zoom level, but that's another issue). Given that the default behaviour is not to show Mapframe maps in infoboxes that already have pushpin maps, I think by the same intention, infoboxes that already have image maps should likewise have Mapframe disabled by default. --Paul_012 (talk) 18:39, 22 February 2024 (UTC)
- Thank you for linking to an example page. It is always helpful. I have added the other two map parameters to the "on by default" test for mapframe maps. I believe that someone could still override the default if desired. – Jonesey95 (talk) 18:45, 22 February 2024 (UTC)
- Thanks, that was quick! --Paul_012 (talk) 18:47, 22 February 2024 (UTC)
- Thank you for linking to an example page. It is always helpful. I have added the other two map parameters to the "on by default" test for mapframe maps. I believe that someone could still override the default if desired. – Jonesey95 (talk) 18:45, 22 February 2024 (UTC)
- Sorry, I was looking at the documentation and forgot to check the template source. My suggestion was prompted by the infobox at New Guinea, which in addition to an already existing image map, now shows a redundant Mapframe map (that is also totally useless due to the wholly inappropriate zoom level, but that's another issue). Given that the default behaviour is not to show Mapframe maps in infoboxes that already have pushpin maps, I think by the same intention, infoboxes that already have image maps should likewise have Mapframe disabled by default. --Paul_012 (talk) 18:39, 22 February 2024 (UTC)
How to suppress the OSM map
Hello all, I was wondering if anyone knows how to suppress the automatic OSM map. I'm not sure how it works, but at Malay Archipelago it is for some reason displaying a map of Belitung, which is deeply unhelpful. CMD (talk) 08:55, 10 April 2024 (UTC)
- @Chipmunkdavis To suppress OSM you can use the argument | mapframe-id = none . But to correct the map, you should correct wikidata coordinate location additionally you can set for OSM area the wikidata-id. Cheers, Hooman Mallahzadeh (talk) 10:06, 10 April 2024 (UTC)
- What would the coordinate location be for an entire archipelago? CMD (talk) 13:48, 10 April 2024 (UTC)
- @Chipmunkdavis Here https://www.wikidata.org/wiki/Q208643 at coordinate location, I updated it to 2°4'50.09462"S, 126°32'48.79298"E Hooman Mallahzadeh (talk) 13:54, 10 April 2024 (UTC)
- Thanks very much. CMD (talk) 13:57, 10 April 2024 (UTC)
- @Chipmunkdavis Here https://www.wikidata.org/wiki/Q208643 at coordinate location, I updated it to 2°4'50.09462"S, 126°32'48.79298"E Hooman Mallahzadeh (talk) 13:54, 10 April 2024 (UTC)
- What would the coordinate location be for an entire archipelago? CMD (talk) 13:48, 10 April 2024 (UTC)
Add territorial seas info?
It would be helpful to add information about maritime claims to the infobox. Particularly outside the territorial seas of a nation, islands like Navassa Island or Clipperton Island are used to stake out exclusive economic zones for fishing, mineral exploration, etc. Suggest adding under geography two new fields: Territorial Sea and EEZ. One tricky bit is that these may be reported as a radius (mi, nm, or km) or as an area (km2, sqmi), so a few options are probably needed to support different source units (for example, eez_mi=
, eez_nm=
, eez_km=
, eez_area_sqmi=
, eez_area_km2=
, etc.). Corresponding footnote fields would be needed too. —Carter (Tcr25) (talk) 15:47, 8 July 2024 (UTC)
- I think I have it working in the sandbox. The only issue that someone needs to add nautical miles (nm) to Template:Infobox islands/length; other than that, it seems to be working in Example 2 in the test cases. —Carter (Tcr25) (talk) 19:35, 8 July 2024 (UTC)