Wikipedia

Lorenz cipher

(Redirected from Tunny (code name))

The Lorenz SZ40, SZ42a and SZ42b were German rotor stream cipher machines used by the German Army during World War II. They were developed by C. Lorenz AG in Berlin. The model name SZ was derived from Schlüssel-Zusatz, meaning cipher attachment. The instruments implemented a Vernam stream cipher.

The Lorenz SZ42 machine with its covers removed. Bletchley Park museum

British cryptanalysts, who referred to encrypted German teleprinter traffic as Fish, dubbed the machine and its traffic Tunny (meaning tunafish) and deduced its logical structure three years before they saw such a machine.[1]

The SZ machines were in-line attachments to standard teleprinters. An experimental link using SZ40 machines was started in June 1941. The enhanced SZ42 machines were brought into substantial use from mid-1942 onwards for high-level communications between the German High Command in Wünsdorf close to Berlin, and Army Commands throughout occupied Europe.[2] The more advanced SZ42A came into routine use in February 1943 and the SZ42B in June 1944.[3]

Radioteletype (RTTY) rather than land-line circuits was used for this traffic.[4] These audio frequency shift keying non-Morse (NoMo) messages were picked up by Britain's Y-stations at Knockholt in Kent, its outstation at Higher Wincombe[5] in Wiltshire, and at Denmark Hill in south London, and forwarded to the Government Code and Cypher School at Bletchley Park (BP). Some were deciphered using hand methods before the process was partially automated, first with Robinson machines and then with the Colossus computers.[6] The deciphered Lorenz messages made one of the most significant contributions to British Ultra military intelligence and to Allied victory in Europe, due to the high-level strategic nature of the information that was gained from Lorenz decrypts.[7]

History

edit

After the Second World War, a group of British and US cryptanalysts entered Germany with the front-line troops to capture the documents, technology and personnel of the various German signal intelligence organizations before these secrets could be destroyed, looted, or captured by the Soviets. They were called the Target Intelligence Committee: TICOM.[8][9]

From captured German cryptographers Drs Huttenhain and Fricke they learnt of the development of the SZ40 and SZ42 a/b.[10] The design was for a machine that could be attached to any teleprinter. The first machine was referred to as the SZ40 (old type) which had ten rotors with fixed cams. It was recognised that the security of this machine was not great. The definitive SZ40 had twelve rotors with movable cams. The rightmost five rotors were called Spaltencäsar but named the Chi wheels by Bill Tutte. The leftmost five were named Springcäsar, Psi wheels to Tutte. The middle two Vorgeleger rotors were called Mu or motor wheels by Tutte.

The five data bits of each ITA2-coded telegraph character were processed first by the five chi wheels and then further processed by the five psi wheels. The cams on the wheels reversed the value of a bit if in the raised position, but left it unchanged if in the lowered position.

Vernam cipher

edit
Main article: Gilbert Vernam

Gilbert Vernam was an AT&T Bell Labs research engineer who, in 1917, invented a cipher system that used the Boolean "exclusive or" (XOR) function, symbolised by ⊕.[11] This is represented by the following "truth table", where 1 represents "true" and 0 represents "false".

XOR truth table
Input A ⊕ B
A B
0 0 0
0 1 1
1 0 1
1 1 0

Other names for this function are: Not equal (NEQ), modulo 2 addition (without 'carry') and modulo 2 subtraction (without 'borrow').

Vernam's cipher is a symmetric-key algorithm, i.e. the same key is used both to encipher plaintext to produce the ciphertext and to decipher ciphertext to yield the original plaintext:

plaintext ⊕ key = ciphertext

and:

ciphertext ⊕ key = plaintext

This produces the essential reciprocity that allows the same machine with the same settings to be used for both encryption and decryption.

Vernam's idea was to use conventional telegraphy practice with a paper tape of the plaintext combined with a paper tape of the key. Each key tape would have been unique (a one-time tape), but generating and distributing such tapes presented considerable practical difficulties. In the 1920s four men in different countries invented rotor cipher machines to produce a key stream to act instead of a tape.[12] The 1940 Lorenz SZ40/42 was one of these.[13]

Operating Principle

edit

The logical functioning of the Tunny system was worked out well before the Bletchley Park cryptanalysts saw one of the machines—which only happened in 1945, as Germany was surrendering to the Allies.[14]

 
The Lorenz SZ machines had 12 wheels each with a different number of cams (or "pins").
OKW/Chi
wheel name 		A B C D E F G H I K L M
BP wheel
name[15] 		ψ1 ψ2 ψ3 ψ4 ψ5 μ37 μ61 χ1 χ2 χ3 χ4 χ5
Number of
cams (pins) 		43 47 51 53 59 37 61 41 31 29 26 23

The SZ machine served as an in-line attachment to a standard Lorenz teleprinter. It had a metal base 19 in × 15.5 in (48 cm × 39 cm) and was 17 in (43 cm) high.[13] The teleprinter characters consisted of five data bits (or "impulses"), encoded in the International Telegraphy Alphabet No. 2 (ITA2). The machine generated a stream of pseudorandom characters. These formed the key that was combined with the plaintext input characters to form the ciphertext output characters. The combination was by means of the XOR (or modulo 2 addition) process.[16]

The key stream consisted of two component parts that were XOR-ed together. These were generated by two sets of five wheels which rotated together. The Bletchley Park cryptanalyst Bill Tutte called these the χ ("chi") wheels, and the ψ ("psi") wheels. Each wheel had a series of cams (or "pins") around their circumference. These cams could be set in a raised (active) or lowered (inactive) position. In the raised position they generated a '1' which reversed the value of a bit, in the lowered position they generated a '0' which left the bit unchanged.[17] The number of cams on each wheel equalled the number of impulses needed to cause them to complete a full rotation. These numbers are all co-prime with each other, giving the longest possible time before the pattern repeated. This is the product of the number of positions of the wheels. For the set of χ wheels it was 41 × 31 × 29 × 26 × 23 = 22,041,682 and for the ψ wheels it was 43 × 47 × 51 × 53 × 59 = 322,303,017. The number of different ways that all twelve wheels could be set was 1.603×1019 i.e. 16 billion billion.

The set of five χ wheels all moved on one position after each character had been enciphered. The five ψ wheels, however, advanced intermittently. Their movement was controlled by the two μ ("mu") or "motor" wheels in series.[18] The SZ40 μ61 motor wheel stepped every time but the μ37 motor wheel stepped only if the first motor wheel was a '1'. The ψ wheels then stepped only if the second motor wheel was a '1'.[19] The SZ42A and SZ42B models added additional complexity to this mechanism, known at Bletchley Park as Limitations. Two of the four different limitations involved characteristics of the plaintext and so were autoclaves.[20]

The key stream generated by the SZ machines thus had a χ component and a ψ component. Symbolically, the key that was combined with the plaintext for enciphering and with the ciphertext for deciphering, can be represented as follows.[18]

key = χ-key ⊕ ψ-key

However to indicate that the ψ component often did not change from character to character, the term extended psi was used, symbolised as: Ψ'. So enciphering can be shown symbolically as:

plaintext ⊕ χ-stream ⊕ ψ'-stream = ciphertext

and deciphering as:

ciphertext ⊕ χ-stream ⊕ ψ'-stream = plaintext.

Operation

edit
 
Cams on wheels 9 and 10 showing their raised (active) and lowered (inactive) positions. An active cam reversed the value of a bit (0→1 and 1→0).

Each "Tunny" link had four SZ machines with a transmitting and a receiving teleprinter at each end. For enciphering and deciphering to work, the transmitting and receiving machines had to be set up identically. There were two components to this; setting the patterns of cams on the wheels and rotating the wheels for the start of enciphering a message. The cam settings were changed less frequently before summer 1944. The ψ wheel cams were initially only changed quarterly, but later monthly, the χ wheels were changed monthly but the motor wheel patterns were changed daily. From 1 August 1944, all wheel patterns were changed daily.[21]

Initially the wheel settings for a message were sent to the receiving end by means of a 12-letter indicator sent un-enciphered, the letters being associated with wheel positions in a book. In October 1942, this was changed to the use of a book of single-use settings in what was known as the QEP book. The last two digits of the QEP book entry were sent for the receiving operator to look up in his copy of the QEP book and set his machine's wheels. Each book contained one hundred or more combinations. Once all the combinations in a QEP book had been used it was replaced by a new one.[22] The message settings should never have been re-used, but on occasion they were, providing a "depth", which could be utilised by a cryptanalyst.[23]

As was normal telegraphy practice, messages of any length were keyed into a teleprinter with a paper tape perforator. The typical sequence of operations would be that the sending operator would punch up the message, make contact with the receiving operator, use the EIN / AUS switch on the SZ machine to connect it into the circuit, and then run the tape through the reader.[13] At the receiving end, the operator would similarly connect his SZ machine into the circuit and the output would be printed up on a continuous sticky tape. Because this was the practice, the plaintext did not contain the characters for "carriage return", "line feed" or the null (blank tape, 00000) character.[4]

Cryptanalysis

edit
Main article: Cryptanalysis of the Lorenz cipher
 
A rebuilt British Tunny at The National Museum of Computing, Bletchley Park. It emulated the functions of the Lorenz SZ40/42, producing printed cleartext from ciphertext input.

British cryptographers at Bletchley Park had deduced the operation of the machine by January 1942 without ever having seen a Lorenz machine, a feat made possible thanks to mistakes made by German operators.

Interception

edit

Tunny traffic was known by Y Station operators used to listening to Morse code transmission as "new music". Its interception was originally concentrated at the Foreign Office Y Station operated by the Metropolitan Police at Denmark Hill in Camberwell, London. But due to lack of resources at this time (around 1941), it was given a low priority. A new Y Station, Knockholt in Kent, was later constructed specifically to intercept Tunny traffic so that the messages could be efficiently recorded and sent to Bletchley Park.[24] The head of Y station, Harold Kenworthy, moved to head up Knockholt. He was later promoted to head the Foreign Office Research and Development Establishment (F.O.R.D.E).

Code breaking

edit

On 30 August 1941, a message of some 4,000 characters was transmitted from Athens to Vienna. However, the message was not received correctly at the other end. The receiving operator then sent an uncoded request back to the sender asking for the message to be retransmitted. This let the codebreakers know what was happening.

The sender then retransmitted the message but, critically, did not change the key settings from the original "HQIBPEXEZMUG". This was a forbidden practice; using a different key for every different message is critical to any stream cipher's security. This would not have mattered had the two messages been identical, however the second time the operator made a number of small alterations to the message, such as using abbreviations, making the second message somewhat shorter.

From these two related ciphertexts, known to cryptanalysts as a depth, the veteran cryptanalyst Brigadier John Tiltman in the Research Section teased out the two plaintexts and hence the keystream. But even almost 4,000 characters of key was not enough for the team to figure out how the stream was being generated; it was just too complex and seemingly random.

After three months, the Research Section handed the task to mathematician Bill Tutte. He applied a technique that he had been taught in his cryptographic training, of writing out the key by hand and looking for repetitions. Tutte did this with the original teleprinter 5-bit International Telegraph Alphabet No. 2 (ITA2) (which was a development of the Baudot code (ITA1)), which led him to his initial breakthrough of recognising a 41-bit repetition.[14][25] Over the following two months up to January 1942, Tutte and colleagues worked out the complete logical structure of the cipher machine. This remarkable piece of reverse engineering was later described as "one of the greatest intellectual feats of World War II".[14]

After this cracking of Tunny, a special team of code breakers was set up under Ralph Tester, most initially transferred from Alan Turing's Hut 8. The team became known as the Testery. It performed the bulk of the subsequent work in breaking Tunny messages, but was aided by machines in the complementary section under Max Newman known as the Newmanry.[26]

Decryption machines

edit

Several complex machines were built by the British to aid the attack on Tunny. The first was the British Tunny.[27][28] This machine was designed by Bletchley Park, based on the reverse engineering work done by Tiltman's team in the Testery, to emulate the Lorenz Cipher Machine. When the pin wheel settings were found by the Testery, the Tunny machine was set up and run so that the messages could be printed.

A family of machines known as "Robinsons" were built for the Newmanry. These used two paper tapes, along with logic circuitry, to find the settings of the χ pin wheels of the Lorenz machine.[29] The Robinsons had major problems keeping the two paper tapes synchronized and were relatively slow, reading only 2,000 characters per second.

 
A team led by Tony Sale (right) reconstructed a Colossus (Mark II) at Bletchley Park. Here, in 2006, Sale supervises the breaking of an enciphered message with the completed machine.

The most important machine was the Colossus of which ten were in use by the war's end, the first becoming operational in December 1943. Although not fully programmable, they were far more efficient than their predecessors, representing advances in electronic digital computers. The Colossus computers were developed and built by Tommy Flowers, of the Dollis Hill Post Office Research Station, using algorithms developed by Bill Tutte and his team of mathematicians.[30] Colossus proved to be efficient and quick against the twelve-rotor Lorenz SZ42 on-line teleprinter cipher machine.

Some influential figures had doubts about his proposed design for the decryption machine, and Flowers proceeded with the project while partly funding it himself.[31][32] Like the later ENIAC of 1946, Colossus did not have a stored program, and was programmed through plugboards and jumper cables. It was faster, more reliable and more capable than the Robinsons, so speeding up the process of finding the Lorenz χ pin wheel settings. Since Colossus generated the putative keys electronically, it only had to read one tape. It did so with an optical reader which, at 5,000 characters per second, was driven much faster than the Robinsons' and meant that the tape travelled at almost 30 miles per hour (48 km/h).[33] This, and the clocking of the electronics from the optically read paper tape sprocket holes, completely eliminated the Robinsons' synchronisation problems. Bletchley Park management, which had been sceptical of Flowers's ability to make a workable device, immediately began pressuring him to construct another. After the end of the war, Colossus machines were dismantled on the orders of Winston Churchill,[34] but GCHQ retained two of them.[35]

Testery executives and Tunny codebreakers

edit
  • Ralph Tester: linguist and head of Testery
  • Jerry Roberts: shift-leader, linguist and senior codebreaker
  • Peter Ericsson: shift-leader, linguist and senior codebreaker
  • Victor Masters: shift-leader
  • Denis Oswald: linguist and senior codebreaker
  • Peter Hilton: codebreaker and mathematician
  • Peter Benenson: codebreaker
  • Peter Edgerley: codebreaker
  • John Christie: codebreaker
  • John Thompson: codebreaker
  • Roy Jenkins: codebreaker
  • Shaun Wylie: codebreaker
  • Tom Colvill: general manager

By the end of the war, the Testery had grown to nine cryptographers and 24 ATS girls (as the women serving that role were then called), with a total staff of 118, organised in three shifts working round the clock.

Surviving machines

edit
 
A Tunny (Lorenz) machine on display at the National Cryptologic Museum, Fort Meade, Maryland, USA

Lorenz cipher machines were built in small numbers; today only a handful survive in museums.

In Germany, examples may be seen at the Heinz Nixdorf MuseumsForum, a computer museum in Paderborn, and the Deutsches Museum, a museum of science and technology in Munich.[36] Two further Lorenz machines are displayed at both Bletchley Park and The National Museum of Computing in the United Kingdom. Another example is on display at the National Cryptologic Museum in Maryland, the United States.

John Whetter and John Pether, volunteers with The National Museum of Computing, bought a Lorenz teleprinter on eBay for £9.50 that had been retrieved from a garden shed in Southend-on-Sea.[37][38] It was found to be the World War II military version, was refurbished and in May 2016 installed next to the SZ42 machine in the museum's "Tunny" gallery.

See also

edit

Notes

edit
  1. ^ Hinsley 1993, p. 141
  2. ^ Hinsley 1993, p. 142
  3. ^ Copeland 2006, pp. 38, 39, "The German Tunny Machine".
  4. ^ a b Good, Michie & Timms 1945, p. 4 of German Tunny
  5. ^ "The National Archives: The interception of German Teleprinter Communications at Foreign Office Station Knockholt - Piece details HW 50/79". Retrieved 2023-12-15.
  6. ^ Good 1993, pp. 160–165
  7. ^ "The History of the Lorenz Cipher and the Colossus Machine". Stanford University. Retrieved 2018-09-09.
  8. ^ Parrish 1986, p. 276.
  9. ^ Rezabek 2017, I Introduction: Origin of TICOM.
  10. ^ Huttenhain & Fricke 1945, pp. 16–19.
  11. ^ Klein, p. 2
  12. ^ Klein, p. 3
  13. ^ a b c Good, Michie & Timms 1945, p. 10 of German Tunny
  14. ^ a b c Sale, Tony, The Lorenz Cipher and how Bletchley Park broke it, retrieved 2010-10-21
  15. ^ Good, Michie & Timms 1945, 1 Introduction: 11 German Tunny, 11B The Tunny Cipher Machine, p. 6.
  16. ^ Good, Michie & Timms 1945, p. 6 of German Tunny
  17. ^ Churchhouse 2002, pp. 156, 157.
  18. ^ a b Good, Michie & Timms 1945, p. 7 of German Tunny
  19. ^ Roberts, Eric, The Lorenz Schluesselzusatz SZ40/42, Stanford University
  20. ^ Good, Michie & Timms 1945, p. 8 of German Tunny
  21. ^ Good, Michie & Timms 1945, p. 14 of German Tunny
  22. ^ Copeland 2006, p. 45, "The German Tunny Machine".
  23. ^ Churchhouse 2002, p. 34
  24. ^ Good, Michie & Timms 1945, p. 281 in Knockholt
  25. ^ Tutte 1998, pp. 356, 357
  26. ^ Roberts 2009
  27. ^ Halton 1993
  28. ^ Bletchley Park completes epic Tunny machine The Register, 26 May 2011, Accessed May 2011
  29. ^ Copeland 2006, p. 66, "Machine against Machine".
  30. ^ "Biography of Professor Tutte - Combinatorics and Optimization". 13 March 2015. Archived from the original on 2019-08-19. Retrieved 2017-05-13.
  31. ^ Boden, Margaret Ann (2006). Mind as Machine: A History of Cognitive Science. Oxford: Clarendon Press. p. 159. ISBN 9780199543168.
  32. ^ Atkinson, Paul (2010). Computer. UK: Reaktion Books. p. 29. ISBN 9781861897374.
  33. ^ Flowers 2006, p. 100
  34. ^ Verdict of Peace: Britain Between Her Yesterday and the future, Correlli Barnett, 2002
  35. ^ Copeland 2006, p. 173.
  36. ^ "Cryptology". Deutsches Museum. Retrieved 2014-10-30.
  37. ^ O'Connell, Paddy (29 May 2016). "Secret German WW2 Code Machine Found on eBay". Broadcasting House. BBC News. Retrieved 2016-11-06.
  38. ^ Gayle, Damien; Meikle, James (29 May 2016). "Device Used in Nazi Coding Machine Found for Sale on eBay". The Guardian. London. Retrieved 2016-11-06.

References

edit

Further reading

edit
edit
Retrieved from "https://en.wikipedia.org/w/index.php?title=Lorenz_cipher&oldid=1249849141"