The Ultra-Efficient Products Penetrater is an American ultralight aircraft designed by Nick Leighty and Rick Berstling and produced by Ultra-Efficient Products. It was first shown at the 1985 Sun 'n Fun air show.[1]
Penetrater | |
---|---|
Role | Ultralight aircraft |
National origin | United States |
Manufacturer | Ultra-Efficient Products |
Designer | Nick Leighty and Rick Berstling |
Introduction | 1985 |
Status | Production completed |
The aircraft's most notable feature was that the pilot flew in the prone position.[2] The pilot lay on top of the fuselage, and used elbow rests and foot stirrups.[1] The aircraft had a cantilever low-wing, a fuselage consisting of a single aluminum alloy tube, a V-tail, a tricycle landing gear, and a single engine in pusher configuration.
Specifications (Penetrater)
editData from Jane's all the world's aircraft, 1987–88[1]
General characteristics
- Crew: one
- Length: 16 ft (4.9 m)
- Wingspan: 24 ft (7.3 m)
- Height: 6 ft (1.8 m)
- Wing area: 108 sq ft (10.0 m2)
- Aspect ratio: 5.33
- Empty weight: 175 lb (79 kg)
- Gross weight: 400 lb (181 kg)
- Fuel capacity: 5 U.S. gallons (19 L; 4.2 imp gal)
- Powerplant: 1 × Zenoah G25B single cylinder, two stroke, 20 hp (15 kW)
- Propellers: 2-bladed, 4 ft 8 in (1.42 m) diameter
Performance
- Maximum speed: 60 mph (97 km/h, 52 kn)
- Cruise speed: 40 mph (64 km/h, 35 kn)
- Stall speed: 24 mph (39 km/h, 21 kn)
- Never exceed speed: 80 mph (130 km/h, 70 kn)
- Range: 250 mi (400 km, 220 nmi)
- Service ceiling: 8,000 ft (2,400 m)
- g limits: ±6
- Maximum glide ratio: 14:1
- Rate of climb: 950 ft/min (4.8 m/s)
- Rate of sink: 250 ft/min (1.3 m/s) @ 40 mph
- Lift-to-drag: 14
- Wing loading: 3.70 lb/sq ft (18.1 kg/m2)
See also
editAircraft of comparable role, configuration, and era
References
edit- ^ a b c Taylor, John W. R.; Munson, Kenneth, eds. (1987). Jane's all the world's aircraft 1987–88. London: Jane's Yearbooks. pp. 724–725. ISBN 0710608500. Retrieved July 14, 2023.
- ^ "Penetrater (1985)". Ultralight Aircraft of the U.S.A. p. Slide 77. Archived from the original on July 14, 2023. Retrieved July 14, 2023.
External links
edit