Uplift modelling, also known as incremental modelling, true lift modelling, or net modelling is a predictive modelling technique that directly models the incremental impact of a treatment (such as a direct marketing action) on an individual's behaviour.

Uplift modelling has applications in customer relationship management for up-sell, cross-sell and retention modelling. It has also been applied to political election and personalised medicine. Unlike the related Differential Prediction concept in psychology, Uplift Modelling assumes an active agent.

Introduction

edit

Uplift modelling uses a randomised scientific control not only to measure the effectiveness of an action but also to build a predictive model that predicts the incremental response to the action. The response could be a binary variable (for example, a website visit)[1] or a continuous variable (for example, customer revenue).[2] Uplift modelling is a data mining technique that has been applied predominantly in the financial services, telecommunications and retail direct marketing industries to up-sell, cross-sell, churn and retention activities.

Measuring uplift

edit

The uplift of a marketing campaign is usually defined as the difference in response rate between a treated group and a randomized control group. This allows a marketing team to isolate the effect of a marketing action and measure the effectiveness or otherwise of that individual marketing action. Honest marketing teams will only take credit for the incremental effect of their campaign.

However, many marketers define lift (rather than uplift) as the difference in response rate between treatment and control, so uplift modeling can be defined as improving (upping) lift through predictive modeling.

The table below shows the details of a campaign showing the number of responses and calculated response rate for a hypothetical marketing campaign. This campaign would be defined as having a response rate uplift of 5%. It has created 50,000 incremental responses (100,000 - 50,000).

Group Number of Customers Responses Response Rate
Treated 1,000,000 100,000 10%
Control 1,000,000 50,000 5%

Traditional response modelling

edit

Traditional response modelling typically takes a group of treated customers and attempts to build a predictive model that separates the likely responders from the non-responders through the use of one of a number of predictive modelling techniques. Typically this would use decision trees or regression analysis.

This model would only use the treated customers to build the model.

In contrast uplift modeling uses both the treated and control customers to build a predictive model that focuses on the incremental response. To understand this type of model it is proposed that there is a fundamental segmentation that separates customers into the following groups (their names were suggested by N. Radcliffe and explained in [3])

  • The Persuadables : customers who only respond to the marketing action because they were targeted
  • The Sure Things  : customers who would have responded whether they were targeted or not
  • The Lost Causes  : customers who will not respond irrespective of whether or not they are targeted
  • The Do Not Disturbs or Sleeping Dogs : customers who are less likely to respond because they were targeted

The only segment that provides true incremental responses is the Persuadables.

Uplift modelling provides a scoring technique that can separate customers into the groups described above.

Traditional response modelling often targets the Sure Things being unable to distinguish them from the Persuadables.

Return on investment

edit

Because uplift modelling focuses on incremental responses only, it provides very strong return on investment cases when applied to traditional demand generation and retention activities. For example, by only targeting the persuadable customers in an outbound marketing campaign, the contact costs and hence the return per unit spend can be dramatically improved.

Removal of negative effects

edit

One of the most effective uses of uplift modelling is in the removal of negative effects from retention campaigns. Both in the telecommunications and financial services industries often retention campaigns can trigger customers to cancel a contract or policy. Uplift modelling allows these customers, the Do Not Disturbs, to be removed from the campaign.

Application to A/B and multivariate testing

edit

It is rarely the case that there is a single treatment and control group. Often the "treatment" can be a variety of simple variations of a message or a multi-stage contact strategy that is classed as a single treatment. In the case of A/B or multivariate testing, uplift modelling can help in understanding whether the variations in tests provide any significant uplift compared to other targeting criteria such as behavioural or demographic indicators.

History of uplift modelling

edit

The first appearance of true response modelling appears to be in the work of Radcliffe and Surry.[4]

Victor Lo also published on this topic in The True Lift Model (2002),[5] and later Radcliffe again with Using Control Groups to Target on Predicted Lift: Building and Assessing Uplift Models (2007).[6]

Radcliffe also provides a very useful frequently asked questions (FAQ) section on his web site, Scientific Marketer.[7] Lo (2008) provides a more general framework, from program design to predictive modeling to optimization, along with future research areas.[8]

Independently uplift modelling has been studied by Piotr Rzepakowski. Together with Szymon Jaroszewicz he adapted information theory to build multi-class uplift decision trees and published the paper in 2010.[9] And later in 2011 they extended the algorithm to multiple treatment case.[10]

Similar approaches have been explored in personalised medicine.[11][12] Szymon Jaroszewicz and Piotr Rzepakowski (2014) designed uplift methodology for survival analysis and applied it to randomized controlled trial analysis.[13] Yong (2015) combined a mathematical optimization algorithm via dynamic programming with machine learning methods to optimally stratify patients.[14]

Uplift modelling is a special case of the older psychology concept of Differential Prediction.[15] In contrast to differential prediction, uplift modelling assumes an active agent, and uses the uplift measure as an optimization metric.

Uplift modeling has been recently extended and incorporated into diverse machine learning algorithms, like Inductive Logic Programming,[15] Bayesian Network,[16] Statistical relational learning,[12] Support Vector Machines,[17][18] Survival Analysis[13] and Ensemble learning.[19]

Even though uplift modeling is widely applied in marketing practice (along with political elections), it has rarely appeared in marketing literature. Kane, Lo and Zheng (2014) published a thorough analysis of three data sets using multiple methods in a marketing journal and provided evidence that a newer approach (known as the Four Quadrant Method) worked quite well in practice.[20] Lo and Pachamanova (2015) extended uplift modeling to prescriptive analytics for multiple treatment situations and proposed algorithms to solve large deterministic optimization problems and complex stochastic optimization problems where estimates are not exact.[21]

Recent research analyses the performance of various state-of-the-art uplift models in benchmark studies using large data amounts.[22][1]

A detailed description of uplift modeling, its history, the way uplift models are built, differences to classical model building as well as uplift-specific evaluation techniques, a comparison of various software solutions and an explanation of different economical scenarios can be found here.[23]

Implementations

edit

In Python

edit

In R

edit

Other languages

edit

Datasets

edit

Notes and references

edit
  1. ^ a b Devriendt, Floris; Moldovan, Darie; Verbeke, Wouter (2018). "A literature survey and experimental evaluation of the state-of-the-art in uplift modeling: A stepping stone toward the development of prescriptive analytics". Big Data. 6 (1): 13–41. doi:10.1089/big.2017.0104. PMID 29570415.
  2. ^ Gubela, Robin M.; Lessmann, Stefan; Jaroszewicz, Szymon (2020). "Response transformation and profit decomposition for revenue uplift modeling". European Journal of Operational Research. 283 (2): 647–661. arXiv:1911.08729. doi:10.1016/j.ejor.2019.11.030. S2CID 208175716.
  3. ^ N. Radcliffe (2007). Identifying who can be saved and who will be driven away by retention activity. Stochastic Solution Limited
  4. ^ Radcliffe, N. J.; and Surry, P. D. (1999); Differential response analysis: Modelling true response by isolating the effect of a single action, in Proceedings of Credit Scoring and Credit Control VI, Credit Research Centre, University of Edinburgh Management School
  5. ^ Lo, V. S. Y. (2002); The True Lift Model, ACM SIGKDD Explorations Newsletter, Vol. 4, No. 2, 78–86, available at http://citeseerx.ist.psu.edu/viewdoc/download;jsessionid=4FD247B4987CBF2E29186DACE0D40C3D?doi=10.1.1.99.7064&rep=rep1&type=pdf
  6. ^ Radcliffe, N. J. (2007); Using Control Groups to Target on Predicted Lift: Building and Assessing Uplift Models, Direct Marketing Analytics Journal, Direct Marketing Association
  7. ^ The Scientific Marketer FAQ on Uplift Modelling
  8. ^ Lo, V. S.Y. (2008) “New Opportunities in Marketing Data Mining.” In Encyclopedia of Data Warehousing and Mining, 2nd edition, edited by Wang (2008), Idea Group Publishing.
  9. ^ Rzepakowski, Piotr; Jaroszewicz, Szymon (2010). "Decision Trees for Uplift Modeling". 2010 IEEE International Conference on Data Mining. Sydney, Australia. pp. 441–450. doi:10.1109/ICDM.2010.62. ISBN 978-1-4244-9131-5. S2CID 14362608.{{cite book}}: CS1 maint: location missing publisher (link)
  10. ^ Rzepakowski, Piotr; Jaroszewicz, Szymon (2011). "Decision trees for uplift modeling with single and multiple treatments". Knowledge and Information Systems. 32 (2): 303–327. doi:10.1007/s10115-011-0434-0.
  11. ^ Cai, T.; Tian, L.; Wong, P. H.; and Wei, L. J. (2009); Analysis of Randomized Comparative Clinical Trial Data for Personalized Treatment Selections, Harvard University Biostatistics Working Paper Series, Paper 97
  12. ^ a b Nassif, Houssam; Kuusisto, Finn; Burnside, Elizabeth S; Page, David; Shavlik, Jude; Santos Costa, Vitor (2013). "Score as You Lift (SAYL): A Statistical Relational Learning Approach to Uplift Modeling". Advanced Information Systems Engineering. Lecture Notes in Computer Science. Vol. 8190. Prague. pp. 595–611. doi:10.1007/978-3-642-40994-3_38. ISBN 978-3-642-38708-1. PMC 4492311. PMID 26158122.{{cite book}}: CS1 maint: location missing publisher (link)
  13. ^ a b Jaroszewicz, Szymon; Rzepakowski, Piotr (2014). "Uplift modeling with survival data" (PDF). ACM SIGKDD Workshop on Health Informatics (HI KDD'14). New York, USA.
  14. ^ Yong, F.H. (2015), "Quantitative Methods for Stratified Medicine," PhD Dissertation, Department of Biostatistics, Harvard T.H. Chan School of Public Health, http://dash.harvard.edu/bitstream/handle/1/17463130/YONG-DISSERTATION-2015.pdf?sequence=1 .
  15. ^ a b Nassif, Houssam; Santos Costa, Vitor; Burnside, Elizabeth S; Page, David (2012). "Relational Differential Prediction". Machine Learning and Knowledge Discovery in Databases. Lecture Notes in Computer Science. Vol. 7523. Bristol, UK. pp. 617–632. doi:10.1007/978-3-642-33460-3_45. ISBN 978-3-642-33459-7.{{cite book}}: CS1 maint: location missing publisher (link)
  16. ^ Nassif, Houssam; Wu, Yirong; Page, David; Burnside, Elizabeth (2012). "Logical Differential Prediction Bayes Net, Improving Breast Cancer Diagnosis for Older Women". American Medical Informatics Association Symposium (AMIA'12). 2012: 1330–1339. PMC 3540455. PMID 23304412.
  17. ^ Kuusisto, Finn; Santos Costa, Vitor; Nassif, Houssam; Burnside, Elizabeth; Page, David; Shavlik, Jude (2014). "Support Vector Machines for Differential Prediction". Machine Learning and Knowledge Discovery in Databases. Lecture Notes in Computer Science. Vol. 8725. Nancy, France. pp. 50–65. doi:10.1007/978-3-662-44851-9_4. ISBN 978-3-662-44850-2. PMC 4492338. PMID 26158123.{{cite book}}: CS1 maint: location missing publisher (link)
  18. ^ Zaniewicz, Lukasz; Jaroszewicz, Szymon (2013). "Support Vector Machines for Uplift Modeling". The First IEEE ICDM Workshop on Causal Discovery. Dallas, Texas.
  19. ^ Sołtys, Michał; Jaroszewicz, Szymon; Rzepakowski, Piotr (2015). "Ensemble methods for uplift modeling". Data Mining and Knowledge Discovery. 29 (6): 1531–1559. doi:10.1007/s10618-014-0383-9.
  20. ^ Kane, K.; Lo, V.S.Y.; Zheng, J. (2014). "Mining for the Truly Responsive Customers and Prospects Using True-Lift Modeling: Comparison of New and Existing Methods". Journal of Marketing Analytics. 2 (4): 218–238. doi:10.1057/jma.2014.18. S2CID 256513132.
  21. ^ Lo, V.S.Y.; Pachamanova, D. (2015). "From Predictive Uplift Modeling to Prescriptive Uplift Analytics: A Practical Approach to Treatment Optimization While Accounting for Estimation Risk". Journal of Marketing Analytics. 3 (2): 79–95. doi:10.1057/jma.2015.5. S2CID 256508939.
  22. ^ Gubela, Robin M.; Bequé, Artem; Lessmann, Stefan; Gebert, Fabian (2019). "Conversion Uplift in E-Commerce: A Systematic Benchmark of Modeling Strategies". International Journal of Information Technology & Decision Making. 18 (3): 747–791. doi:10.1142/S0219622019500172. hdl:10419/230773. S2CID 126538764.
  23. ^ R. Michel, I. Schnakenburg, T. von Martens (2019). „Targeting Uplift“. Springer, ISBN 978-3-030-22625-1

See also

edit
edit